Sony KDL-40EX1 / KDL-46EX1 / KDL-52EX1 / LDM-E401 / LDM-E461 / LDM-E521 / MBT-W1 Service Manual ▷ View online
- 16 -
Connectors
Connectors
Connectors
Connector
Connectors
Connector
Connector
Connectors
Connectors
Connector
2-2-10. GS3 Board Removal (40/46 inches)
Screw Part number(s) and Description(s)
2-580-593-01 SCREW, +PSW M3X8 (7 Screws)
Screw Part number(s) and Description(s)
2-580-593-01 SCREW, +PSW M3X8 (9 Screws)
2-2-9. F Board Removal
Screw Part number(s) and Description(s)
2-580-593-01 SCREW, +PSW M3X8 (6 Screws)
Screw Part number(s) and Description(s)
7-685-646-79 SCREW, +BVTP 3X8 TYPE2 IT-3 (4 Screws)
Remove the 4 screws circled, disconnect the 2 connectors
indicated and gently pull the board away from the TV set.
indicated and gently pull the board away from the TV set.
Remove the 9 screws circled, disconnect the 6 connectors
indicated and gently pull the board away from the TV set.
indicated and gently pull the board away from the TV set.
Remove the 7 screws circled, disconnect the 4 connectors
indicated and gently pull the board away from the TV set.
indicated and gently pull the board away from the TV set.
Remove the 6 screws circled, disconnect the 6 connectors
indicated and gently pull the board away from the TV set.
indicated and gently pull the board away from the TV set.
2-2-11. GS4 Board Removal (52 inches)
2-2-12. GS5 Board Removal (52 inches)
- 17 -
2-2-14. H2P Board Removal
2-2-15. HIT Removal
Disconnect 2 connectors indicated, ( refer to Section 1 page 6
for XA connector handling precautions). Remove the screw
circled and gently lift the HIT out of its position and rest gently
in a convenient position.
To remove the HIT completely disconnect the 2 connectors on
DSX board.
for XA connector handling precautions). Remove the screw
circled and gently lift the HIT out of its position and rest gently
in a convenient position.
To remove the HIT completely disconnect the 2 connectors on
DSX board.
Screw Part number(s) and Description(s)
2-580-640-01 SCREW, BVTP2 4X16
Using a screw driver or similar tool ease the area of the H1P
board circled, away from the Button Power. The H1P board
can then be gently removed.
board circled, away from the Button Power. The H1P board
can then be gently removed.
Remove the Button Power by releasing the clip indicated
and easing gently away from the TV set. Disconnect the
connector from the H1P board to completely remove the
Button Power.
and easing gently away from the TV set. Disconnect the
connector from the H1P board to completely remove the
Button Power.
Release the clip indicated and ease the H2P board away
from the TV set. Disconnect the connector and the H2P
board can be completely removed from the TV set.
from the TV set. Disconnect the connector and the H2P
board can be completely removed from the TV set.
2-2-13. H1P Board Removal
2-2-16. H3P Board Removal
Remove the Bracket H3P by pressing the clip indicated and
pulling gently away from the TV set. The H3P board can then
be gently removed.
pulling gently away from the TV set. The H3P board can then
be gently removed.
XA Connector
Clip
Clip
Clip
Connector
- 18 -
Connectors
Clips
Connector
Connectors
2-2-18. HSP Board Removal (Step 2)
2-2-19. HSP Board Removal (Step 3)
Remove 2 screws circled. Release the 2 clips indicated and
gently ease the board away from the HSP Bracket.
gently ease the board away from the HSP Bracket.
Turn the HSP Bracket over and remove the screw circled.
Screw Part number(s) and Description(s)
2-580-593-01 SCREW, +PSW M3X8
2-2-17. HSP Board Removal (Step 1)
Screw Part number(s) and Description(s)
2-580-640-01 SCREW, BVTP2 4X16
Remove the screws circled (2 on 40/46 inches, 1 on 52
inches), disconnect the connectors (3 on 40/46 inches, 2 on
52 inches) indicated and gently remove the HSP Bracket
from the TV set.
inches), disconnect the connectors (3 on 40/46 inches, 2 on
52 inches) indicated and gently remove the HSP Bracket
from the TV set.
2-2-20. IF1 Board Removal
Turn the IF1board over. Disconnect the connector indicated,
the board can then be completely removed from the TV set.
the board can then be completely removed from the TV set.
40/46 Inches
52 Inches
Remove the 5 screws circled and gently ease the board away
from the TV set to release the board to board connector on the
underside of the board.
from the TV set to release the board to board connector on the
underside of the board.
Screw Part number(s) and Description(s)
2-580-593-01 SCREW, +PSW M3X 8 (5 Screws)
Screw Part number(s) and Description(s)
2-635-562-31 SCREW (M1.7) (2 Screws)
- 19 -
Clip
Remove the 6 screws circled and gently ease the RF Module
(HM501) board away from the TV set.
(HM501) board away from the TV set.
Screw Part number(s) and Description(s)
2-580-593-01 SCREW, +PSW M3X8 (6 Screws)
2-2-21. Antenna Board Removal
Disconnect 6 pop connectors indicated. Remove Antenna
board by releasing the clip indicated and easing the board
away from the TV set.
board by releasing the clip indicated and easing the board
away from the TV set.
=>
Pop connectors
=>
2-2-23. RF Board Removal
Remove the screw circled, disconnect the connector indicated
and slide the board away from the Bracket RF.
and slide the board away from the Bracket RF.
Screw Part number(s) and Description(s)
2-580-629-01 SCREW, +BVST 3X8 (1 Screw)
Connector
2-2-22. RF Module (HM501) Board Removal
=>
=> =>
=> => =>
Click on the first or last page to see other KDL-40EX1 / KDL-46EX1 / KDL-52EX1 / LDM-E401 / LDM-E461 / LDM-E521 / MBT-W1 service manuals if exist.