DOWNLOAD Sony KDL-32HX755 / KDL-40HX755 / KDL-46HX755 / KDL-55HX755 Service Manual ↓ Size: 10.22 MB | Pages: 53 in PDF or view online for FREE

Model
KDL-32HX755 KDL-40HX755 KDL-46HX755 KDL-55HX755
Pages
53
Size
10.22 MB
Type
PDF
Document
Service Manual
Brand
Device
TV
File
kdl-32hx755-kdl-40hx755-kdl-46hx755-kdl-55hx755.pdf
Date

Sony KDL-32HX755 / KDL-40HX755 / KDL-46HX755 / KDL-55HX755 Service Manual ▷ View online

KDL-32HX755/40HX755/46HX755/55HX755 40
SECTION 5 - UPDATES AND ADJUSTMENTS
OPTIONAL ADJUSTMENTS
All Sony TVs are set for optimal viewing performance. Refer to the following 
instructions if the customer requests additional adjustments.
ENABLING VCOM TO ADJUST THE PICTURE
The VCOM adjustment displays a Green screen while you adjust the picture.
1.  Take the TV out of deep Standby mode by pressing 
POWER
to 
turn on the TV.
2.  Press 
POWER
to turn the TV back off.
3.  Press the following buttons on the Remote Commander within a 
second of each other: 
 
DISPLAY
 
 Channel 
5
 
 Volume 
+
 
 
POWER
DIGITAL
SERVICE
001 OP
000 VERS   
---
<MAIN>
<EXT>
DM1.027AAA
AA
RF:0000
WF1.002W00AA
WF:9.2.1.12.4
DF3.130W00AA
WF:0A
YM1.409W00AA
FD:0.068
M4.091C
(DM1.027AAA)
DD1.009W00AA
PK1.009W00AA
<PEM>
MID:0C33A216
-------------------
PID:04042040
-------------------
PNL:LTY460HQ0501
TUNER: ENABLE
-------------------
-------------------
4.  Press 
JUMP
 or 
OPTIONS
 on the Remote Commander until the 
VPC menu displays.
5.  Press 
2
 to move to the 
002 VCOM category.
VPC
SERVICE
002
000 
VCOM
ENABLE             0
6.  Enable the 
VCOM by pressing 
3
 to increase the data value to 
1.
7.  Press 
1
 to move to the
 001 ADJUST item.
VPC
SERVICE
002
001 
VCOM
ADJUST            64
8.  Change the value of the 
001 ADJUST item to adjust the picture by 
pressing 
3
 to increase the data value or 
6
 to decrease the data 
value. 
 
NOTE: When changing the data value, the screen will turn green 
for approximately 3 seconds before returning to the service 
adjustment screen.
VPC
SERVICE
001 
001 
VCOM
ADJUST             69
9.  When the picture is clear, press 
MUTING
 then 
0
 to WRITE 
(Save) the changes.
VPC
WRITE
002
001 
VCOM
ADJUST             64
KDL-32HX755/40HX755/46HX755/55HX755 41
SECTION 5 - UPDATES AND ADJUSTMENTS
10.  Do one of the following:
a.  If adjustments are complete, exit service mode by turning the 
TV power off.
b.  Proceed to “Setting White Balance Adjustments”.
SETTING WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
VPC
SERVICE
000 
000 
DATA_COPY 
BU_TRANS            0
11.  Press 
2
 to move to 006 WB” Category.
VPC
SERVICE
006 
000 
WB
R_DRV            128
12.  To change the data value of the 
R_DRV, press 
3
 to increase the 
value or 
6
 to decrease the value.
 
NOTE: The data value must be set between the range 1 to 255.
13.  Press 
1
 to move to the next item (
001 G_DRV).
14.  To change the data value, press 
3
 to increase the value or 
6
 to 
decrease the value.
15.  Repeat steps 6 and 7 for each of the following items:
 
002 B_DRV
 
003 R_BKG
 
004 G_BKG
 
005 B_BKG
16.  To save the changes, press 
MUTING
 then press 
0
.
17.  Exit service mode by turning the TV power off.
RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments and Channel 
Memory settings to the preset factory conditions.
1.  Turn the TV On by pressing 
POWER
, then wait approximately 
seconds.
2.  While holding down the   on the Remote Commander, press the  
POWER
 button on the side of the TV.
3.  The set restarts and displays the Initial Setup screen. This may 
take several minutes.
RESETTING THE TV TO FACTORY CONDITION USING 
SERVICE MODE
1.  Take the TV out of deep Standby mode by pressing 
POWER
to 
turn on the TV.
2.  Press 
POWER
to turn the TV back off.
3.  Press the following buttons on the Remote Commander within a 
second of each other: 
 
DISPLAY
 
 Channel 
5
 
 Volume 
+
 
 
POWER
4.  If necessary, press 
JUMP
 or 
OPTIONS
 to go to DIGITAL menu.
KDL-32HX755/40HX755/46HX755/55HX755 42
SECTION 5 - UPDATES AND ADJUSTMENTS
5.  Press the following buttons on the Remote Commander within a 
second of each other: 
 Press
   
  MUTING
  0
.
 
SERVICE” changes to green RST. 
 
RST executes the command and displays EXE.
 
EXE-RST displays green, then red indicating the TV is writing the 
data.
6.  When the process is complete the green SERVICE text displays 
and the LED display as shown below: 
 
 
TIMER   
 Standby 
   POWER
7.  Cycle AC Power  
(Unplug and Plug AC Cord from the AC Outlet). 
 
The set restarts and displays the Initial Setup screen.  
This may take several minutes.
KDL-32HX755/40HX755/46HX755/55HX755 43
Sony Corporation
Sony Technology Center
Technical Services
Service Publication Department
9-883-880-02
English
2012DJ74WEB-1
Printed in USA
© 2012.4
is a trademark of Sony Electronics
Reproduction in whole or part without written permission is prohibited. All rights reserved
Page of 53
Display

Click on the first or last page to see other KDL-32HX755 / KDL-40HX755 / KDL-46HX755 / KDL-55HX755 service manuals if exist.