Sony KDL-32EX715 / KDL-40EX715 / KDL-46EX715 (serv.man3) Service Manual ▷ View online
KDL-32EX715/40EX715/46EX715
20
SERVICE ADJUSTMENTS
2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD
OR LCD PANEL
The following procedures must be completed after replacing the BAL
Board or the LCD panel.
þ
Update the TV to the latest software version
þ
Select the Model
þ
Select the Destination
þ
Verify model and panel information are correct
þ
Reconnect all cables
2-2-1. UPDATING THE SOFTWARE
After replacing the BAL Board or the LCD Panel, you must update the
software to the latest version.
Before you begin:
Before you begin:
þ
Disconnect all cables (RF, External input, Ethernet, etc.)
from the TV
Instructions for updating the software are included with the software
package. After completing the software update, proceed to “Selecting
the Model”.
2-2-2. SELECTING THE MODEL
After replacing the BAL Board or LCD Panel, go into Service Mode to set
the Model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
KDL-32EX715/40EX715/46EX715
21
SERVICE ADJUSTMENTS
4. Press
2
to move to the
002 MODEL (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis Model Name Data Value Code Name
AZ1-L KDL-32EX715
25
3a-0.3
AZ1-L KDL-40EX715
25
3a-0.3
AZ1-L KDL-46EX715
25
3a-0.3
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
Data Value
Code Name
6. Proceed to “Setting the Destination”.
2-2-3. SELECTING THE DESTINATION
After replacing the BAL Board or the LCD Panel, the destination location
must be set.
CAUTION: Selecting the incorrect destination may require replacing the
BAL Board.
DIGITAL
SERVICE
002 MODEL
000 SEG
25: 3a-0.3
7. Press
1
to move to “
001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
20: AR (BR grp)
KDL-32EX715/40EX715/46EX715
22
SERVICE ADJUSTMENTS
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination
of the TV.
GROUP
DESTINATION
CODE
DATA
VALUE
DESTINATION
BR
13
BRAZIL
ARGENTINA
CHILE
PERU
VENEZUELA
20
AR
BR grp
DIGITAL
SERVICE
002 MODEL
001 DEST
20: AR (BR grp)
Data Value
Destination
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BAL Board replacement.
9. After verifying the destination data value displays,
press
0
to save (Write) the changes.
10. Exit Service Mode by pressing HOME or
turn the TV power off.
11. Proceed to “Verifying the Model and Panel Information”.
2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press
JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID
PID
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
Model ID
Product ID
Panel
Code
257736b7
50ca0000
T315HW07 V1
KDL-32EX715/40EX715/46EX715
23
SERVICE ADJUSTMENTS
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name
Model ID
Product ID
Panel ID
KDL-32EX715
257736b7
50ca0000
T315HW07 V1
KDL-40EX715
257736b5
50ca0000
LTU(Z)400HF01
KDL-40EX715
257736b5
50ca0000
LTY(Z)400HF07
KDL-46EX715
257736b8
50ca0000
T460HW04 V5
5. Exit Service Mode by pressing HOME or
turn the TV power off.
6. Proceed to “Reconnecting All Cables”.
2-2-5. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
2-3. WHITE BALANCE ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
NOTE: If the
Digital Service Menu is not displayed, press
JUMP or OPTIONS .
3. Press
2
to move to “006 WB” Category.
DIGITAL
SERVICE
006 WB
000 WHITE_BALANCE ___
000 WHITE_BALANCE ___
4. Press
0
to enter White Balance Adjustment mode.
5. To select the White Balance Adjustment setting that needs to
be changed, do the following:
a. To select R_DRV, press
a. To select R_DRV, press
1
.
b. To select G_DRV, press
2
.
c. To select B_DRV, press
3
.
d. To select R_BKG, press
4
.
e To select G_BKG, press
5
.
f. To select B_BKG, press
6
.
Click on the first or last page to see other KDL-32EX715 / KDL-40EX715 / KDL-46EX715 (serv.man3) service manuals if exist.