Sony KDL-32EX715 / KDL-40EX715 / KDL-46EX715 (serv.man3) Service Manual ▷ View online
KDL-32EX715/40EX715/46EX715
8
SELF DIAGNOSIS FUNCTIONS
STANDBY LED FLASH COUNT
Ambient Sensor/
(IR) Infrared Receiver
Picture Off /
Timer LED
Standby LED
Power LED
2 times
5 times
LED ON 0.3 sec.
LED OFF 0.3 sec.
LED OFF 0.3 sec.
LED OFF
3 sec.
KDL-32EX715/40EX715/46EX715
9
SELF DIAGNOSIS FUNCTIONS
VIEWING THE SELF CHECK DIAGNOSTIC LIST
For errors with symptoms such as “power sometimes shuts off” or “screen sometimes goes out” that cannot be confirmed, it is possible to
bring up past occurrences of a failure for confirmation on the Self Check diagnostic screen:
1. TV must be in standby mode. (Power off).
2. Press the following buttons on the Remote Commander within a second of each other:
2. Press the following buttons on the Remote Commander within a second of each other:
DISPLAY
Channel
5
Volume
-
POWER
.
* NOTE: This differs from accessing Service Adjustments Mode (Volume +)
Total operation time by hour (MAX:65535)
Boot count (MAX:65535)
Panel operation time by hour (MAX:65535)
Total operation time by hour (MAX:65535)
Boot count (MAX:65535)
Panel operation time by hour (MAX:65535)
0501210811 0412311234 0311111825 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
002 MAIN_POWE
003 DC_ALERT1
003 DC_ALERT1
003 AUD_PROT
004 BALANCER
005 HFR_ERR
005 P_ID_ERR
12345-00333-06789
12345-00333-06789
-
-
-------------- -------------- -------------- 00
003 DTT_WDT
-------------- -------------- -------------- 00
005 TCON_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
006 BACKLITE
007 TEMP_ERR
010 RESERVED
-------------- -------------- -------------- 00
007 FAN_ERR
-------------- -------------- -------------- 00
-------------- -------------- -------------- 00
000 RGB_SEN
011 RESERVED
-------------- -------------- -------------- 00
SELF CHECK
StandBy LED Flash Count
Diagnostic Item
Error history (Most recent time the failure occurred)
Diagnostic Item
Error history (Most recent time the failure occurred)
Error history (Failure time before the last occurrence)
Error history (Failure time before the 2
Error history (Failure time before the 2
nd
to last occurrence)
Error Count (00-99)
KDL-32EX715/40EX715/46EX715
10
CLEARING THE SELF CHECK DIAGNOSTIC LIST
Since the diagnostic results displayed on the screen are not automatically cleared, always check the self-diagnostic screen after you have
completed the repairs to be sure you have cleared the result display to “0”.
1. To clear the Error history and Error count: Press the Channel
8
Channel
0
.
2. To clear the Panel operation time: Press the Channel
7
Channel
0
.
EXITING THE SELF CHECK DIAGNOSTIC SCREEN
1. To exit the Self Diagnostic screen, turn off the power to the TV by pressing the POWER button on the remote or the POWER button on
the TV.
SELF DIAGNOSIS FUNCTIONS
KDL-32EX715/40EX715/46EX715
11
Components not identified by a part number or
description are not stocked because they are seldom
required for routine service.
The component parts of an assembly are indicated by the
reference numbers in the far right column of the parts list
and within the dotted lines of the diagram.
*
Items marked with an asterisk are not stocked since
they are seldom required for routine service. Expect
some delay when ordering these components.
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
SEC 1. DISASSEMBLY/PART NUMBER INFORMATION
1-1. TABLE-TOP STAND ASSEMBLY REMOVAL
A Remove 4 screws from Table-Top Stand Assembly
B Lift up TV set to detach from Table-Top Stand Assembly
B Lift up TV set to detach from Table-Top Stand Assembly
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1
A-1780-315-A
STAND (L3C) ASSEMBLY (FOR ARGENTINA) [3-5]
(KDL-46EX715 ONLY)
2
X-2547-875-1
BASE (M3A) ASSEMBLY (FOR CHILE)
(KDL-32EX715/40EX715 ONLY)
2
A-1768-634-A
BASE (M3A) ASSEMBLY (FOR ARGENTINA)
(KDL-40EX715 ONLY)
2
X-2547-878-1
BASE (L3C) ASSEMBLY (FOR CHILE)
(KDL-46EX715 ONLY)
3
4-170-477-01
COVER, NECK (M3A FRONT)
4
4-170-485-01
COVER, NECK (M3A REAR)
5
4-170-449-01
NECK (M3A)
(KDL-32EX715 ONLY)
5
4-170-450-11
NECK (ML3A)
(FOR ALL EXCEPT KDL-32EX715 ONLY)
6
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to the
Wall Mount Brackets
2-580-608-01
SCREW, +PSW M5X16
C Gently place the TV set face down onto a soft cloth
2
5
3
4
6
1
B
A
Soft Cloth
C
Click on the first or last page to see other KDL-32EX715 / KDL-40EX715 / KDL-46EX715 (serv.man3) service manuals if exist.