Sony KDL-32EX507 / KDL-40EX507 / KDL-46EX507 Service Manual ▷ View online
KDL-32EX507/40EX507/46EX507
20
SERVICE ADJUSTMENTS
2-1-2. USING THE REMOTE COMMANDER TO VIEW OR
CHANGE SERVICE DATA
Use the buttons on the Remote Commander to access the Service
Menu items and adjust the Data Values.
DISPLAY
Channel
5
Volume
+
POWER
4. To change the Category,
press
2
to move to the Next Category or
press
5
to go back to the Previous Category.
Note: Pressing
2
or
5
only changes the Categories within
the Service Menu displayed.
5. To change the adjustment item,
press
1
to move to the Next Item or
4
to go back to the Previous Item.
6. To change the Data Value,
press
3
to increase the Data Value or
6
to decrease the Data Value.
7. Press
MUTING then press
0
to Write the changes.
8. To exit service mode, press HOME or turn the TV power off.
2-2. ADJUSTMENTS AFTER REPLACING THE BAL BOARD
OR LCD PANEL
The following procedures must be completed after replacing the BAL
Board or the LCD panel.
Update the TV to the latest software version
Select the Model
Select the Destination
Verify model and panel information are correct
Reconnect all cables
2-2-1. UPDATING THE SOFTWARE
After replacing the BAL Board or the LCD Panel, you must update the
software to the latest version.
Before you begin
Disconnect all cables (RF, External input, Ethernet, etc.) from
the TV
Instructions for updating the software are included with the software
package. After completing the software update, proceed to “Selecting the
Model”.
KDL-32EX507/40EX507/46EX507
21
SERVICE ADJUSTMENTS
2-2-2. SELECTING THE MODEL
After replacing the BAL Board or LCD Panel, go into Service Mode to set
the Model data value.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display
the
DIGITAL Service Menu.
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID1C117081
LTY320AB01
PID04020000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
4. Press
2
to move to the 002 MODEL (Next) category.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
01: 2a-3
5. Using the table, press
3
to increase the data value or
6
to decrease the data value, to match the model of the TV.
Chassis Model Name
䎧
䎧䏄䏗䏄䎃
䎹䏄䏏䏘䏈
䎦䏒䏇䏈䎃
䎱䏄䏐䏈
AZ1-L
KDL-40EX507
13
3a-1
AZ1-L
KDL-32EX507
13
3a-1
AZ1-L
KDL-46EX507
13
3a-1
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
13: 3a-1
Data Value
Code Name
KDL-32EX507/40EX507/46EX507
22
SERVICE ADJUSTMENTS
6. Proceed to “Selecting the Destination”.
2-2-3. SETTING THE DESTINATION
After replacing the BAL Board or the LCD Panel, the destination location
must be set.
CAUTION: Selecting the incorrect destination may requiring replacing the
BAL Board.
DIGITAL
SERVICE
002 MODEL
000 SEG
000 SEG
13: 3a-1
7. Press
1
to move to “001 DEST” sub Category.
DIGITAL
SERVICE
002 MODEL
001 DEST
001 DEST
03: UC (UC grp)
8. Using the table, press
3
to increase the data value or
6
to decrease the data value, to select the destination of the
TV.
GROUP
DESTINATION
CODE
DATA
VALUE
DESTINATION
TW
6
TAIWAN
CO
21
COLOMBIA
TW grp
DIGITAL
SERVICE
002 MODEL
001 DEST
001 DEST
21: CO (TW grp)
Data Value
Destination
CAUTION: Verify the DESTINATION is set correctly before
proceeding to the next step. If another destination Data
Value is selected, it may possibly corrupt the software which
would require a BAL Board replacement.
9. After verifying the destination data value displays,
press
0
to save (Write) the changes.
10. Exit Service Mode by pressing HOME or
turn the TV power off.
11. Proceed to “Verifying the Model and Panel Information”.
2-2-4. VERIFYING THE MODEL AND PANEL INFORMATION
After saving the changes to the service data, verify the information.
1. TV must be in standby mode. (Power off).
2. Access Service Mode.
Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
3. Display
the
DIGITAL Service Menu.
KDL-32EX507/40EX507/46EX507
23
SERVICE ADJUSTMENTS
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
DIGITAL
SERVICE
001 OP
000 VERS
000 VERS
---
<MAIN>
<SUB>
DM1.301J00AA
SM1.010W00AA
M2.105C
SB1.000W00AA
DD1.016J00AA
SD1.010 W00AA
(DM1.3 01J00AA)
RF01.05
WP00.521J00AA
ID1C117081
ID25C73302
PID546A0000
WF:2.0.0.99
PID546A0000
WF:2.0.0.99
<BEM>
WF:0B
BM1.012W00LU
Camera FW
BB1.000W00LU
Camera FW
BD1.011J46LUX
---.---------
---.---------
T315HW04 V1
Model ID
Product ID
Panel
Code
Code
4. Using the table, verify the Model ID and the Product ID
match the information in the Service Menu.
Model Name Model ID ProduCt ID
Panel ID
Code
Name
KDL-32EX507 25C73302
546A0000
T315HW04 V1
3a-1
KDL-32EX507 25C7330C
546A0000
LTY(Z)320HF01
3a-1
KDL-32EX507 25C73302
546A0000
T315HW04 V1
3a-1
KDL-32EX507 25C7330C
546A0000
LTY(Z)320HF01
3a-1
KDL-40EX507 25C73319
546A0000
LTY(Z)400HF06
3a-1
KDL-40EX507 25C73319
546A0000
LTY(Z)400HF06
3a-1
KDL-46EX507 25C73310
546A0000
LTY(Z)460HJ01
3a-1
KDL-46EX507 25C73310
546A0000
LTY(Z)460HJ01
3a-1
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
2-2-5. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
Click on the first or last page to see other KDL-32EX507 / KDL-40EX507 / KDL-46EX507 service manuals if exist.