Sony HDR-PJ260 / HDR-PJ260E / HDR-PJ260V / HDR-PJ260VE / HDR-XR260V / HDR-XR260VE Service Manual ▷ View online
SERVICE MANUAL
HDR-PJ260/PJ260E/PJ260V/PJ260VE/XR260E/XR260V/XR260VE_L2
SERVICE NOTE (Check the following note before the service.)
Revision History
Published by Sony Techno Create Corporation
Sony Corporation
LEVEL
2
983463636.pdf
Ver. 1.5 2013.05
Digital HD Video Camera Recorder
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque
marque
0 sont critiques pour la
sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
Ne les remplacer que par une
pièce portant le numéro spécifié.
9-834-636-36
Ver.
Date
History
Contents
S.M. Rev.
issued
1.0
2011.12
Official Release
—
—
1.1
2012.01
Revised-1
(A1 11-344)
(A1 11-344)
• Change of SERVICE NOTE.
Page
1-2
,
1-3
,
1-4
,
1-5
,
1-6
,
1-7
Yes
1.2
2012.05
Revised-2
(A2 12-019)
(A2 12-019)
• Addition of North European Model (PJ260E).
Page
Page
3
• Change of EXPLODED VIEWS.
Page
2-10
Yes
1.3
2012.06
Revised-3
(A3 12-146)
(A3 12-146)
• Correction of REPAIR PARTS LIST.
Page
Page
2-13
,
2-14
• Correction of ACCESSORIES.
Page
2-15
Yes
1.4
2012.09
Revised-4
(A4 12-234)
(A4 12-234)
• Change of REPAIR PARTS LIST.
Page
Page
2-9
Yes
1.5
2013.05
Revised-5
(A5 13-029)
(A5 13-029)
• Correction of REPAIR PARTS LIST.
Page
Page
2-11
Yes
2013E08-1
© 2013.05
1-1.
POWER SUPPLY DURING REPAIRS
1-2.
PRECAUTION ON REPLACING THE VC-653 BOARD
1-3.
ADDITION OF DESTINATION DATA FILE
1-4.
PRECAUTION ON REPLACING THE MS-478 BOARD
1-5.
PRECAUTION ON REPLACING THE LENS
1-6. SELF-DIAGNOSIS
FUNCTION
1-7.
METHOD OF COPING WITH SHIFT LENS ERROR
1-8.
GPS RECEIVING CHECK (PJ260V/PJ260VE/XR260V/XR260VE)
1-9.
PRECAUTION ON REPLACING THE LD-279 BOARD (PJ260/PJ260E/PJ260V/PJ260VE)
1-10.
PRECAUTION ON REPLACING THE HDD (XR260V/XR260VE)
1-11.
NOTE ON REPLACING PROJECTOR UNIT (PJ260/PJ260E/PJ260V/PJ260VE)
Photo: HDR-PJ260V
US Model
Canadian Model
AEP Model
UK Model
North European Model
E Model
Australian Model
Hong Kong Model
Chinese Model
Korea Model
Brazilian Model
Tourist Model
HDR-PJ260/PJ260E/PJ260V/PJ260VE/
XR260E/XR260V/XR260VE
Revised-5
Replace the previously issued
SERVICE MANUAL 9-834-636-35
with this Manual.
SERVICE MANUAL 9-834-636-35
with this Manual.
– 2 –
HDR-PJ260/PJ260E/PJ260V/PJ260VE/XR260E/XR260V/XR260VE_L2
SPECIFICATIONS
System
Signal format: PAL color, CCIR standards
HDTV 1080/50i, 1080/50p specification
Movie recording format:
HD: MPEG-4 AVC/H.264 AVCHD format
Ver.2.0
compatible
STD:
MPEG2-PS
Audio recording system:
HDR-PJ260E/PJ260VE/XR260E/XR260VE
HDR-PJ260E/PJ260VE/XR260E/XR260VE
Dolby Digital 2ch/5.1ch
Dolby Digital 5.1 Creator
Photo file format:
DCF
DCF
Ver.2.0
Compatible
Exif
Ver.2.3
Compatible
MPF Baseline Compatible
Recording media (Movie/Photo):
Internal
Internal
memory
HDR-PJ260E/PJ260VE: 16 GB
Hard
disk
HDR-XR260E/XR260VE: 160 GB
“Memory Stick PRO Duo” media
SD card (Class 4 or faster)
The capacity that a user can use
HDR-PJ260VE: Approx. 12.8 GB
*1
HDR-PJ260E: Approx. 15.8 GB
*2
HDR-XR260VE: Approx. 156 GB
*1
HDR-XR260E: Approx. 159 GB
*2
*1
1 GB equals 1 billion bytes, 2.8 GB is used
for pre-installed map and another portion is
used for data management functions. Only
pre-installed demonstration movie may be
deleted.
used for data management functions. Only
pre-installed demonstration movie may be
deleted.
*2
1 GB equals 1 billion bytes, a portion of
which is used for system management and/
or application files. Only preinstalled dem-
onstration movie may be deleted.
or application files. Only preinstalled dem-
onstration movie may be deleted.
Image device:
HDR-PJ260E/PJ260VE/XR260E/XR260VE:
HDR-PJ260E/PJ260VE/XR260E/XR260VE:
4.6 mm (1/3.91 type) CMOS sensor
Recording pixels (photo, 16:9):
Max. 8.9 mega (3 984 × 2 240) pixels
*1
Gross: Approx. 5 430 000 pixels
Effective (movie, 16:9)
*2
:
Approx. 2 230 000 pixels
Effective (photo, 16:9):
Approx. 2 230 000 pixels
Effective (photo, 4:3):
Approx. 1 670 000 pixels
Lens: G lens
HDR-PJ260E/PJ260VE/XR260E/XR260VE:
HDR-PJ260E/PJ260VE/XR260E/XR260VE:
30 × (Optical)
*2
, 55 × (Extended)
*3
, 350 ×
(Digital)
Filter diameter (HDR-PJ260E/PJ260VE/
XR260E/XR260VE): 37 mm (1 1/2 in.)
F1.8 ~ 3.4
Focal
length:
f=2.1 mm ~ 63.0 mm (3/32 in. ~ 2 1/2 in.)
When converted to a 35 mm still camera
For
movies
*2
: 29.8 mm ~ 894 mm (1 3/16 in.
~ 35 1/4 in.) (16:9)
For photos: 29.8 mm ~ 894 mm (1 3/16 in.
~ 35 1/4 in.) (16:9)
Minimum illumination:
6 lx (lux) (in default setting, shutter speed
1/50
second)
3 lx (lux) ([Low Lux] is set to [On], shutter
speed 1/25 second)
*1
The unique pixel array of Sony’s ClearVid
and the image processing system (BIONZ)
allow still image resolution equivalent to
the sizes described.
allow still image resolution equivalent to
the sizes described.
*2
[
SteadyShot] is set to [Standard] or [Off].
*3
[
SteadyShot] is set to [Active].
Input/Output connectors
A/V Remote Connector: Video and audio output
jack
HDMI OUT jack: HDMI mini connector
USB jack: mini-AB/Type A (Built-in USB)
(output
jack
HDMI OUT jack: HDMI mini connector
USB jack: mini-AB/Type A (Built-in USB)
(output
only)
Headphone jack (HDR-PJ260E/PJ260VE/
XR260E/XR260VE):
Stereo minijack (
φ
3.5 mm)
MIC input jack: Stereo minijack (
φ
3.5 mm)
LCD screen
Picture: 7.5 cm (3.0 type, aspect ratio 16:9)
Total number of pixels:
HDR-PJ260E/PJ260VE/XR260E/XR260VE:
Total number of pixels:
HDR-PJ260E/PJ260VE/XR260E/XR260VE:
230 400 (960 × 240)
Projector (HDR-PJ260E/PJ260VE)
Projection type: DLP
Light source: LED (R/G/B)
Focus: Manual
Throw Distance: 0.5 m (1.6 feet) or over
Contrast ratio: 1500:1
Resolution (output): nHD (640 × 360)
Continuous projection time (when using the
Light source: LED (R/G/B)
Focus: Manual
Throw Distance: 0.5 m (1.6 feet) or over
Contrast ratio: 1500:1
Resolution (output): nHD (640 × 360)
Continuous projection time (when using the
supplied battery pack):
HDR-PJ260E/PJ260VE: Approx. 1 h 30 min
General
Power requirements: DC 6.8 V/7.2 V (battery
pack) DC 8.4 V (AC Adaptor)
USB Charging: DC 5 V 500 mA/1.5 A
Average power consumption:
Average power consumption:
During camera recording using LCD screen
at normal brightness:
HDR-PJ260E/PJ260VE:
HD: 2.7 W STD: 2.5 W
HDR-XR260E/XR260VE:
HD: 3.5 W STD: 3.2 W
Operating temperature: 0 °C to 40 °C (32 °F to
104
104
°F)
Storage temperature: –20 °C to +60 °C (–4 °F to
+140
+140
°F)
Dimensions (approx.):
HDR-XR260E/XR260VE:
HDR-XR260E/XR260VE:
59.5 mm × 66 mm × 117.5 mm (2 3/8 in. ×
2 5/8 in. × 4 5/8 in.) (w/h/d) including the
projecting
parts
59.5 mm × 66 mm × 128 mm (2 3/8 in.
× 2 5/8 in. × 5 1/8 in.) (w/h/d) including
the projecting parts, and the supplied
rechargeable battery pack attached
HDR-PJ260E/PJ260VE:
58.5 mm × 64.5 mm × 116.5 mm (2 3/8 in.
× 2 5/8 in. × 4 5/8 in.) (w/h/d) including the
projecting
parts
58.5 mm × 64.5 mm × 128 mm (2 3/8 in.
× 2 5/8 in. × 5 1/8 in.) (w/h/d) including
the projecting parts, and the supplied
rechargeable battery pack attached
Mass (approx.)
HDR-XR260E/XR260VE:
HDR-XR260E/XR260VE:
355 g (12 oz) main unit only
405 g (14 oz) including the supplied
rechargeable battery pack
HDR-PJ260E/PJ260VE:
320 g (11 oz) main unit only
370 g (13 oz) including the supplied
rechargeable battery pack
AC Adaptor AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V,
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C (32 °F to
104
Power consumption: 18 W
Output voltage: DC 8.4 V*
Operating temperature: 0 °C to 40 °C (32 °F to
104
°F)
Storage temperature: –20 °C to +60 °C (–4 °F to
+140
+140
°F)
Dimensions (approx.): 48 mm × 29 mm ×
81 mm (1 15/16 in. × 1 3/16 in. × 3 1/4 in.)
(w/h/d) excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
power cord (mains lead)
* See the label on the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FV50
Maximum output voltage: DC 8.4 V
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
Typical: 7.0 Wh (1 030 mAh)
Minimum: 6.6 Wh (980 mAh)
Type:
Li-ion
Design and specifications of your camcorder and
accessories are subject to change without notice.
• Manufactured under license from Dolby
accessories are subject to change without notice.
• Manufactured under license from Dolby
Laboratories.
These specifications are extracted from the instruction manual of
HDR-PJ260E/PJ260VE/XR260E/XR260VE.
HDR-PJ260E/PJ260VE/XR260E/XR260VE.
These specifications are extracted from the instruction manual of
HDR-PJ260/PJ260V/XR260V.
HDR-PJ260/PJ260V/XR260V.
SPECIFICATIONS
System
Signal format: NTSC color, EIA standards
HDTV 1080/60i, 1080/60p specification
Movie recording format:
HD: MPEG-4 AVC/H.264 AVCHD format
Ver.2.0
compatible
STD:
MPEG2-PS
Audio recording system:
HDR-PJ260/PJ260V/XR260V
HDR-PJ260/PJ260V/XR260V
Dolby Digital 2ch/5.1ch
Dolby Digital 5.1 Creator
Photo file format:
DCF
DCF
Ver.2.0
Compatible
Exif
Ver.2.3
Compatible
MPF Baseline Compatible
Recording media (Movie/Photo):
Internal
Internal
memory
HDR-PJ260/PJ260V: 16 GB
Hard
disk
HDR-XR260V: 160 GB
“Memory Stick PRO Duo” media
SD card (Class 4 or faster)
The capacity that a user can use
HDR-PJ260: Approx. 15.8 GB
*2
HDR-XR260V: Approx. 156 GB
*1
*1
1 GB equals 1 billion bytes, 2.8 GB is used
for pre-installed map and another portion is
used for data management functions. Only
pre-installed demonstration movie may be
deleted.
used for data management functions. Only
pre-installed demonstration movie may be
deleted.
*2
1 GB equals 1 billion bytes, a portion of
which is used for system management and/
or application files. Only preinstalled dem-
onstration movie may be deleted.
or application files. Only preinstalled dem-
onstration movie may be deleted.
Image device:
HDR-PJ260/PJ260V/XR260V:
HDR-PJ260/PJ260V/XR260V:
4.6 mm (1/3.91 type) CMOS sensor
Recording pixels (photo, 16:9):
Max. 8.9 mega (3 984 × 2 240) pixels
*1
Gross: Approx. 5 430 000 pixels
Effective (movie, 16:9)
*2
:
Approx. 2 230 000 pixels
Effective (photo, 16:9):
Approx. 2 230 000 pixels
Effective (photo, 4:3):
Approx. 1 670 000 pixels
Lens: G lens
HDR-PJ260/PJ260V/XR260V:
HDR-PJ260/PJ260V/XR260V:
30 × (Optical)
*2
, 55 × (Extended)
*3
, 350 ×
(Digital)
Filter diameter (HDR-PJ260/PJ260V/
XR260V): 37 mm (1 1/2 in.)
F1.8 ~ 3.4
Focal
length:
f=2.1 mm ~ 63.0 mm (3/32 in. ~ 2 1/2 in.)
When converted to a 35 mm still camera
For
movies
*2
: 29.8 mm ~ 894 mm (1 3/16 in.
~ 35 1/4 in.) (16:9)
For photos: 29.8 mm ~ 894 mm (1 3/16 in.
~ 35 1/4 in.) (16:9)
Color temperature: [Auto], [One Push], [Indoor]
(3 200 K), [Outdoor] (5 800 K)
Minimum illumination:
6 lx (lux) (in default setting, shutter speed
1/60
second)
3 lx (lux) ([Low Lux] is set to [On], shutter
speed 1/30 second)
*1
The unique pixel array of Sony’s ClearVid
and the image processing system (BIONZ)
allow still image resolution equivalent to the
sizes described.
allow still image resolution equivalent to the
sizes described.
*2
[
SteadyShot] is set to [Standard] or [Off].
*3
[
SteadyShot] is set to [Active].
Input/Output connectors
A/V Remote Connector: Video and audio output
jack
HDMI OUT jack: HDMI mini connector
USB jack: mini-AB/Type A (Built-in USB)
Headphone jack (HDR-PJ260/PJ260V/XR260V):
jack
HDMI OUT jack: HDMI mini connector
USB jack: mini-AB/Type A (Built-in USB)
Headphone jack (HDR-PJ260/PJ260V/XR260V):
Stereo minijack (
φ
3.5 mm)
MIC input jack: Stereo minijack (
φ
3.5 mm)
LCD screen
Picture: 7.5 cm (3.0 type, aspect ratio 16:9)
Total number of pixels:
HDR-PJ260/PJ260V/XR260V:
Total number of pixels:
HDR-PJ260/PJ260V/XR260V:
230 400 (960 × 240)
Projector (HDR-PJ260/PJ260V)
Projection type: DLP
Light source: LED (R/G/B)
Focus: Manual
Throw Distance: 0.5 m (1.6 feet) or over
Contrast ratio: 1500:1
Resolution (output): nHD (640 × 360)
Continuous projection time (when using the
Light source: LED (R/G/B)
Focus: Manual
Throw Distance: 0.5 m (1.6 feet) or over
Contrast ratio: 1500:1
Resolution (output): nHD (640 × 360)
Continuous projection time (when using the
supplied battery pack):
HDR-PJ260/PJ260V: Approx. 1 h 30 min
General
Power requirements: DC 6.8 V/7.2 V (battery
pack) DC 8.4 V (AC Adaptor)
USB Charging: DC 5 V 500 mA/1.5 A
Average power consumption:
Average power consumption:
During camera recording using LCD screen
at normal brightness:
HDR-PJ260/PJ260V:
HD: 2.7 W STD: 2.5 W
HDR-XR260V:
HD: 3.5 W STD: 3.2 W
Operating temperature: 0 °C to 40 °C (32 °F to
104
104
°F)
Storage temperature: –20 °C to +60 °C (–4 °F to
+140
+140
°F)
Dimensions (approx.):
HDR-XR260V:
HDR-XR260V:
59.5 mm × 66 mm × 117.5 mm (2 3/8 in. ×
2 5/8 in. × 4 5/8 in.) (w/h/d) including the
projecting
parts
59.5 mm × 66 mm × 128 mm (2 3/8 in.
× 2 5/8 in. × 5 1/8 in.) (w/h/d) including
the projecting parts, and the supplied
rechargeable battery pack attached
HDR-PJ260/PJ260V:
58.5 mm × 64.5 mm × 116.5 mm (2 3/8 in.
× 2 5/8 in. × 4 5/8 in.) (w/h/d) including the
projecting
parts
58.5 mm × 64.5 mm × 128 mm (2 3/8 in.
× 2 5/8 in. × 5 1/8 in.) (w/h/d) including
the projecting parts, and the supplied
rechargeable battery pack attached
Mass (approx.)
HDR-XR260V:
HDR-XR260V:
355 g (12 oz) main unit only
405 g (14 oz) including the supplied
rechargeable battery pack
HDR-PJ260/PJ260V:
320 g (11 oz) main unit only
370 g (13 oz) including the supplied
rechargeable battery pack
AC Adaptor AC-L200C/AC-L200D
Power requirements: AC 100 V - 240 V,
50 Hz/60 Hz
Current consumption: 0.35 A - 0.18 A
Power consumption: 18 W
Output voltage: DC 8.4 V
Power consumption: 18 W
Output voltage: DC 8.4 V
*
Operating temperature: 0 °C to 40 °C (32 °F to
104
104
°F)
Storage temperature: –20 °C to +60 °C (–4 °F to
+140
+140
°F)
Dimensions (approx.): 48 mm × 29 mm ×
81 mm (1 15/16 in. × 1 3/16 in. × 3 1/4 in.)
(w/h/d) excluding the projecting parts
Mass (approx.): 170 g (6.0 oz) excluding the
power cord (mains lead)
* See the label on the AC Adaptor for other
specifications.
Rechargeable battery pack NP-FV50
Maximum output voltage: DC 8.4 V
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
Output voltage: DC 6.8 V
Maximum charge voltage: DC 8.4 V
Maximum charge current: 2.1 A
Capacity
Typical: 7.0 Wh (1 030 mAh)
Minimum: 6.6 Wh (980 mAh)
Type:
Li-ion
Design and specifications of your camcorder and
accessories are subject to change without notice.
• Manufactured under license from Dolby
accessories are subject to change without notice.
• Manufactured under license from Dolby
Laboratories.
– 3 –
HDR-PJ260/PJ260E/PJ260V/PJ260VE/XR260E/XR260V/XR260VE_L2
Model information table
Model
HDR-PJ260
HDR-PJ260E
HDR-PJ260V
HDR-PJ260VE HDR-XR260E
HDR-XR260V HDR-XR260VE
Destination
KR
NE,
E, CH, JE
US, CND, E
AEP,UK,NE, E,
AUS
E, CH
US, CND, E, BR AEP,UK,NE, E,
AUS, HK
COLOR system
NTSC
PAL
NTSC
PAL
PAL
NTSC
PAL
Recording media
Internal memory
16 GB
Internal memory
16 GB
Internal memory
16 GB
Internal memory
16 GB
Hard Disk
Drive
160 GB
Hard Disk
Drive
160 GB
Hard Disk
Drive
160 GB
LENS
LSV-1450A
LSV-1450A
LSV-1450A
LSV-1450A
LSV-1450A
LSV-1450A
LSV-1450A
Projector
●
●
●
●
─
─
─
GPS
─
─
●
●
─
●
●
Hot shoe
─
─
─
─
─
─
─
Charging capacitor
(for flash)
─
─
─
─
─
─
─
MODEL GROUP
Projector Model:
PJ260/PJ260E/PJ260V/PJ260VE
Non Projector Model: XR260E/XR260V/XR260VE
HDD Model:
XR260E/XR260V/XR260VE
IM Model (Internal Memory Model): PJ260/PJ260E/PJ260V/PJ260VE
GPS Model:
PJ260V/PJ260VE/XR260V/XR260VE
Non GPS Model: PJ260/PJ260E/XR260E
• Abbreviation
AUS: Australian
model
BR: Brazilian model
CH: Chinese
model
CND:
Canadian
model
HK: Hong Kong model
JE: Tourist
model
KR: Korea
model
NE: North European model
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST
ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPO-
NENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY
SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFIÉS PAR UNE MARQUE 0 SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE REM-
PLACER CES COMPOSANTS QUE PAR DES PIÈCES SONY DONT
LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU DANS LES
SUPPLÉMENTS PUBLIÉS PAR SONY.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
1. Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes and
bridges.
bridges.
2. Check the interboard wiring to ensure that no wires are “pinched”
or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transistors,
that were installed during a previous repair. Point them out to the
customer and recommend their replacement.
customer and recommend their replacement.
4. Look for parts which, through functioning, show obvious signs of
deterioration. Point them out to the customer and recommend their
replacement.
replacement.
5. Check the B+ voltage to see it is at the values specified.
6. Flexible Circuit Board Repairing
6. Flexible Circuit Board Repairing
• Set the soldering iron tip temperature to 350 °C approximately.
• Do not touch the soldering iron on the same conductor of the circuit
• Do not touch the soldering iron on the same conductor of the circuit
board (within 3 times).
• Be careful not to apply force on the conductor when soldering or
unsoldering.
UNLEADED SOLDER
This unit uses unleaded solder.
Boards requiring use of unleaded solder are printed with the lead free
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
Boards requiring use of unleaded solder are printed with the lead free
mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with the
lead free mark due to their particular size.)
: LEAD FREE MARK
Be careful to the following points to solder or unsolder.
• Set the soldering iron tip temperature to 350 °C approximately.
If cannot control temperature, solder/unsolder at high temperature
for a short time.
Caution: The printed pattern (copper foil) may peel away if the
for a short time.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Unleaded solder is more viscous (sticky, less prone to
flow) than ordinary solder so use caution not to let solder
bridges occur such as on IC pins, etc.
flow) than ordinary solder so use caution not to let solder
bridges occur such as on IC pins, etc.
• Be sure to control soldering iron tips used for unleaded solder and
those for leaded solder so they are managed separately. Mixing un-
leaded solder and leaded solder will cause detachment phenomenon.
leaded solder and leaded solder will cause detachment phenomenon.
The changed portions from
Ver. 1.1 are shown in blue.
Ver. 1.1 are shown in blue.
Ver. 1.2 2012.05
1-1
HDR-PJ260/PJ260E/PJ260V/PJ260VE/XR260E/XR260V/XR260VE_L2
1. SERVICE NOTE
1-1. POWER SUPPLY DURING REPAIRS
In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4 V), the power is shut off
so that the unit cannot operate.
These following method is available to prevent this.
so that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor.
1-2. PRECAUTION ON REPLACING THE VC-653 BOARD
Note the following when replacing the board.
DESTINATION DATA
When you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATION DATA WRITE”.
After the board replacement, the error of the built-in recording media may be displayed. In this case, execute the [DESTINATION DATA WRITE]
then the error will be cleared. If it is not cleared with [DESTINATION DATA WRITE], format the built-in recording media.
Start the Adjust Manual in the Adjust Station and execute the “DESTINATION DATA WRITE”.
After the board replacement, the error of the built-in recording media may be displayed. In this case, execute the [DESTINATION DATA WRITE]
then the error will be cleared. If it is not cleared with [DESTINATION DATA WRITE], format the built-in recording media.
USB SERIAL SAVE
When you replace to the repairing board, get the data from the former one.
Start the Adjust Manual in the Adjust Station and perform “USB SERIAL SAVE” to get the data.
Start the Adjust Manual in the Adjust Station and perform “USB SERIAL SAVE” to get the data.
USB SERIAL No.
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.
This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.
Start the Adjust Manual in the Adjust Station and execute the “USB SERIAL No. INPUT”.
Data for projector (PJ260/PJ260E/PJ260V/PJ260VE)
Before replacing the board with a spare board, acquire the following data from the current board.
• Fixed value (that shows irradiation performance of the projector).
• Serial number of the projector unit.
To acquire the data, start Adjust Manual from Adjust Station and select [Projector Data Reference] on the [DATA] tab.
• Fixed value (that shows irradiation performance of the projector).
• Serial number of the projector unit.
To acquire the data, start Adjust Manual from Adjust Station and select [Projector Data Reference] on the [DATA] tab.
About unit with Internal Memory Model
After the board replacement, execute the procedure below first.
1. Execute the [DESTINATION DATA WRITE] of ADJUST tab in the Adjust Manual.
2. Execute the script files below. (Refer to the flowchart in Fig. 1)
1. Execute the [DESTINATION DATA WRITE] of ADJUST tab in the Adjust Manual.
2. Execute the script files below. (Refer to the flowchart in Fig. 1)
• 11DdmMmcReadTestMINI_v4.vbe
• 11DdmMmcMakePartition_v4.vbe
• 11DdmMmcMakePartition_v4.vbe
Note: Download the script files from TISS Homepage.
When searching in the TISS Homepage, enter “IM_VC_TOOL” for keyword in the Part Number field.
Unless these script files are executed, the following symptoms may appear.
Make sure execute the above script files.
• The internal memory is not recognized as a media.
• The management file saved in the internal memory model cannot be repaired.
• The internal memory cannot be formatted.
Make sure execute the above script files.
• The internal memory is not recognized as a media.
• The management file saved in the internal memory model cannot be repaired.
• The internal memory cannot be formatted.
START
END
Reactive the camcorder automatically
Disconnect the USB cable,
and turn off the power switch.
Select the "USB CONNECT" to establish
the connection
Execute
the "DdmMmcReadTestMINI.vbe"
(several second)
Wait until "SetOverallReadMINI OK" display
Reactive the camcorder automatically
Execute
the "11DdmMMCMakePartition.vbe"
(several second)
Wait until "MakePartition OK" display
During the power is turning-on,
pull-out the AC-adapter.
Then connect the AC-adapter Again
(It's running with blue color monitor.)
Connect to the PC with a USB cable,
and turn on the power switch.
* by SEUS driver
Fig.1