Sony KDL-32CX527 / KDL-40CX527 Service Manual ▷ View online
KDL-32CX527/40CX527
44
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
BATV (MAIN) BOARD, HLR2 BOARD, HMS3 BOARD AND
LCD PANEL REMOVAL
NOTES:
To disconnect the LVDS connector, refer to
“Handling the FFC Connector” on page 3
)
The insulation Sheet (G2) is not included with the LCD Panel and must be replaced
when replacing the LCD panel.
A Remove 5 screws from BATV Board
B Disconnect 5 connectors from BATV Board
(Refer to
“Handling the FFC Connector” on page 3
to disconnect the LVDS Connector.)
C Release clips and disconnect 1 connector to detach HMS3 Board from LED Guide
D Lift up Frenel Lens to detach from LED Guide
E Release clips and disconnect 1 connector to detach HLR2 Board from LED Guide
F Lift up 2 Panel Support brackets to detach from Bezel
G Gently lift-up LCD Panel to detach from Bezel
151
4-275-852-01
BEZEL (32 ATL)
(KDL-32CX527 ONLY)
151
4-275-853-01
BEZEL (40 ATL)
(KDL-40CX527 ONLY)
152
4-166-126-11
SUPPORT, PANEL
153
NA
LCD PANEL
FOR ALL LCD PANEL AND TCON PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
154
A-1817-414-B
BATV BOARD, COMPLETE
AFTER REPLACING THE MAIN BOARD OR THE LCD PANEL, YOU
MUST UPDATE THE SOFTWARE TO THE LATEST VERSION.
155
4-268-448-01
SHEET, INSULATION (G2)
ORDER THIS PART WHEN REPLACING THE LCD PANEL.
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
156
A-1792-877-A
HLR2 BOARD, MOUNTED
157
A-1792-511-A
HMS3 BOARD, MOUNTED
158
1-856-184-11
FRENEL LENS
2-990-421-41
SCREW (+PSW) (M3X6)
Detail
C
D
A
B
E
G
F
Detail
Detail
157
158
154
153
151
152
156
155
Detail
CLEANING THE LCD PANEL ASSEMBLY
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of
electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
®
®
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and
warm water.
®
If using a chemically pretreated cloth, please follow the instruction provided on the package.
®
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
®
Periodic vacuuming of the ventilation openings is recommended to ensure the proper ventilation.
KDL-32CX527/40CX527
45
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identified by shading
and
!
mark are critical for safety. Replace only
with part number specified.
NOTE: The components identified by a red outline and a mark contain
confidential information. Specific instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
201
1-838-842-11
(LVDS) FLEXIBLE FLAT CABLE I4 32S
(KDL-32CX527 ONLY)
201
NA
(LVDS) FLEXIBLE FLAT CABLE I4 40S
(KDL-40CX527 ONLY)
FOR LVDS PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
202
1-910-801-00
CONNECTOR ASSY 15P
(KDL-32CX527 ONLY)
202
1-910-801-56
CONNECTOR ASSY 15P
(KDL-40CX527 ONLY)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
203
1-910-800-98
CONNECTOR ASSY 14P
(KDL-32CX527 ONLY)
203
1-910-801-55
CONNECTOR ASSY 14P
(KDL-40CX527 ONLY)
204
1-910-801-08
HARNESS ASSY
(KDL-32CX527 ONLY)
204
1-910-801-64
HARNESS ASSY
(KDL-40CX527 ONLY)
SCREW LEGEND
CONNECTORS
201
204
202
203
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
4-256-393-01
SCREW, +PSW M3X6 W12
AC COVER(1)
1
■
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
RC to TERMINAL AREA(1)
1
□
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
RC(10), BTM FRM to BEZ(2)
12
◆
4-257-907-01
JOINT, STAND
RC(2)
2
◇
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(1), RC to PNL(2), BTM FRM(2)
5
●
2-990-421-41
SCREW, (+PSW) (M3X6)
BATV(5), G2AS(2)
7
☆
4-259-541-01
USER SCREW ST
HEAD STAND to NECK(1), BASE STAND to NECK(2)
3
P/N
DESCRIPTION
REMARKS
TOTAL
▲
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(3)
3
△
4-256-393-01
SCREW, +PSW M3X6 W12
AC COVER(1)
1
■
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
RC to TERMINAL AREA(1)
1
□
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
RC(10), BTM FRM to BEZ(2)
12
◆
4-257-907-01
JOINT, STAND
RC(2)
2
◇
4-159-298-01
SCREW, +PSW M4X10
RC to BTM FRM(1), RC to PNL(2), BTM FRM(2)
5
●
2-990-421-41
SCREW, (+PSW) (M3X6)
BATV(5), G2BS(2)
7
☆
4-259-541-01
USER SCREW ST
HEAD STAND to NECK(1), BASE STAND to NECK(2)
3
KDL-32CX527
KDL-40CX527
KDL-32CX527/40CX527
46
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
ACCESSORIES AND PACKING
3-299-071-05
FLYER, SAFETY
4-273-074-11
FLYER, SAFETY
4-273-010-31
MANUAL, INSTRUCTION
!
1-838-797-11
POWER-SUPPLY CORD (WITH CONN.)
*
4-275-364-11
SUPPLEMENT(STAND INSTALLATION)
4-259-541-01
USER SCREW ST
(SCREWS TO ATTACH NECK TO BASE STAND AND HEAD STAND)
2-580-608-01
SCREW, +PSW M5X16
(SCREWS TO ATTACH TABLE-TOP STAND TO LCD TV)
For product protection and safety reasons, Sony strongly recommends
that you use the screws provided with the TV
CAUTION: These screws cannot be used to secure the TV to
the Wall Mount Brackets
MISCELLANEOUS
X-2549-819-1
BAG, SCREW ASSY (M)
4-188-302-11
HEX WRENCH
4-100-136-01
SHEET (CORE), C
4-256-443-01
SHEET, RADIATION (BAT-L/V)
4-087-858-41
SHEET, VIBRATION PROOF
4-260-776-02
SPACER (G B)
7-632-452-24
TAPE (NO.303) 18MMX35M YEL
X-2549-230-1
SUPPORT BELT KIT
REMOTE COMMANDER
1-489-485-11
REMOTE COMMANDER (RM-YD064)
KDL-32CX527/40CX527
47
SECTION 6 - DISASSEMBLY/PART NUMBER INFORMATION
WIRE DRESSING DIAGRAMS
KDL-32CX527 ONLY
FIGURE 6-1. KDL-32CX527 OVERALL WIRE DRESSING
KDL-40CX527 ONLY
FIGURE 6-2. KDL-40CX527 OVERALL WIRE DRESSING
Click on the first or last page to see other KDL-32CX527 / KDL-40CX527 service manuals if exist.