Sony KDL-32BX305 Service Manual ▷ View online
KDL-32BX305/40BX405
24
SERVICE ADJUSTMENTS
Model Name Model ID Product ID
Panel ID
Code
Name
KDL-32BX305
25973693
34A20000
LTY(Z)320AP04
5-2
KDL-32BX305
25973694
34A20000
T315XW04 V0
5-2
KDL-32BX305
25973693
34A20000
LTY(Z)320AP04
5-2
KDL-32BX305
25973694
34A20000
T315XW04 V0
5-2
KDL-40BX405
25973697
34A20000 LTY(Z)400HM01
5-2
KDL-40BX405
25973698
34A20000
T400HW03 V0
5-2
KDL-40BX405
25973697
34A20000 LTY(Z)400HM01
5-2
KDL-40BX405
25973698
34A20000
T400HW03 V0
5-2
5. Exit Service Mode by pressing HOME or turn the TV power
off.
6. Proceed to “Reconnecting All Cables”.
2-2-6. RECONNECTING ALL CABLES
After completing the changes to service mode, reconnect all the cables
(RF, External input, Ethernet, etc.) to the TV then verify the TV set picture.
If necessary, proceed to “White Balance Adjustments”.
2-3. WHITE
BALANCE
ADJUSTMENTS
White Balance adjustment data is located on the Digital Service Menu.
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
NOTE: There are 3 Service Menus for this model, DIGITAL,
CHASSIS, and SUB. If the DIGITAL Service Menu is
not displayed, press JUMP or OPTIONS on the Remote
Commander.
3. Press
2
to until the “006 WB” Category displays.
DIGITAL
SERVICE
006 WB
000 WHITE_BALANCE ___
000 WHITE_BALANCE ___
4. Press
0
to enter White Balance Adjustment mode.
5. To select the White Balance Adjustment setting that needs to
be changed, do the following:
a. To select R_DRV, press
a. To select R_DRV, press
1
.
b. To select G_DRV, press
2
.
c. To select B_DRV, press
3
.
d. To select R_BKG, press
4
.
e To select G_BKG, press
5
.
f. To select B_BKG, press
6
.
6. After selecting the White Balance setting, press ENT to
display the edit screen.
The screen displays a “Please input WB items” message.
KDL-32BX305/40BX405
25
SERVICE ADJUSTMENTS
DIGITAL
SERVICE
WB
*1 R_DRV 128
*1 R_DRV 128
2 G_DRV 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
3 B_DRV 128
4 R_BKG 128
5 G_BKG 128
6 B_BKG 128
Please input WB items
(0 -255)
---
(0 -255)
---
Gain
0: x 0.5, 128: x 1, 255: x1.5
Offset
128: offset 0
7. Using the numbers buttons on the remote, enter the Data
Value for the White Balance setting
(value must be between 1 and 255).
8. Press ENT to WRITE (save) the changes.
9. To exit White Balance Adjustment, press JUMP or OPTIONS
2-4. RESETTING THE TV TO FACTORY CONDITION
Use the following instructions to restore the User Adjustments
and Channel Memory settings to the preset factory conditions.
1. While holding down the on the Remote Commander,
press the POWER button on the TV Switch Unit of the set.
The set restarts and displays the Initial Setup screen. This
may take several minutes.
2-4-1. RESETTING THE TV TO FACTORY CONDITION USING
SERVICE MODE
1. TV must be in Standby Mode. (POWER off).
2. Press the following buttons on the Remote Commander
within a second of each other:
DISPLAY
Channel
5
Volume
+
POWER
.
3. If necessary, press JUMP or OPTIONS to go to DIGITAL
mode.
4. Press
8
.
“SERVICE” changes to green RST.
5. Press
MUTING .
RST executes the command and displays EXE.
6. Press
0
.
EXE-RST displays green, then red indicating the TV is
writing the data.
7. When the process is complete the green SERVICE text
displays and the LED display as shown below:
TIMER
Standby
POWER
TIMER
Standby
POWER
8. Cycle AC Power (Unplug and Plug AC Cord from the
AC Outlet).
9. The set restarts and displays the Initial Setup screen.
This may take several minutes.
KDL-32BX305/40BX405
26
SEC 3. DIAGRAMS
3-1. CIRCUIT BOARDS LOCATION
G2LE (KDL-32BX305 ONLY)
G2HE (KDL-40BX405 ONLY)
H2LS
HLR
BAL
KDL-32BX305/40BX405
27
DIAGRAMS
3-2. BLOCK
DIAGRAM
Click on the first or last page to see other KDL-32BX305 service manuals if exist.