Sony KDL-32BX305 Service Manual ▷ View online
KDL-32BX305/40BX405
12
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-2. REAR COVER, H2LS BOARD, AND VESA BRACKET REMOVAL
A Remove screws from Rear Cover
10 from KDL-32BX305 ONLY
8 from KDL-40BX405 ONLY
B Remove 2 screws from Rear Cover bottom-center (KDL-40BX405 ONLY)
C Remove 2 screws from Rear Cover top-center
D Remove 1 screw from Terminal position
D Remove 1 screw from Terminal position
E Remove 1 screw from Side Jack position
F Disconnect Power Cord from Power (G2LE/G2HE) Boards and detach from Under Cover
G Remove 1 screw from Under Cover to detach from Bottom Frame
51
4-155-666-11
REAR COVER(32)
(KDL-32BX305
ONLY)
51
4-155-667-11
REAR COVER(40)
(KDL-40BX405
ONLY)
52
3-196-465-12
COVER, ECS
53
4-157-976-01
COVER, UNDER (32)
(KDL-32BX305
ONLY)
53
4-157-977-01
COVER, UNDER (37)
(KDL-40BX405
ONLY)
54
4-167-326-01
BRAKET, VESA (S)
55
A-1744-403-A
H2LS BOARD, MOUNTED
56
NA
SUPPORT, PANEL
FOR ALL SUPPORT PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
2-580-595-01
SCREW, +PSW M3X12 (KLV-32BX300 ONLY)
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
4-159-298-01
SCREW, +PSW M4X10
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
H Slide Vesa Brackets sideways to remove
from Rear Cover
I Slide Vesa Brackets up to remove from
Rear Cover
J Disconnect 1 connector from H2LS Board,
then release clips and lift up to remove
from Button Control
K Slide-out Panel Supports to remove from
Bezel Assembly
2 from KDL-32BX305 ONLY
4 from KDL-40BX405 ONLY
NOTE: The Vesa Brackets are not
included with the Rear Cover and must be
reattached to the replacement Rear Cover
52
54
53
51
55
56
A
D
E
I
H
G
F
KDL-32BX305 ONLY
KDL-40BX405 ONLY
KDL-40BX405 ONLY
C
B
J
K
KDL-32BX305/40BX405
13
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-3. HLR BOARD AND LOUDSPEAKERS REMOVAL
A Remove 1 screw from Speaker Bracket Right to detach from Bezel Assembly
B Remove 2 screws from Loudspeaker to detach from Speaker Bracket Right
B Remove 2 screws from Loudspeaker to detach from Speaker Bracket Right
C Remove 2 screws from Bottom Frame to detach from Panel
D Remove 2 screws from Bottom Frame to detach from Bezel Assembly (KDL-40BX405 ONLY)
D Remove 2 screws from Bottom Frame to detach from Bezel Assembly (KDL-40BX405 ONLY)
E Remove 1 screw from Speaker Bracket Left to detach from Bezel Assembly
F Remove 2 screws from Loudspeaker to detach from Speaker Bracket Left
G Disconnect 1 connector from HLR Board, then release clips and lift up to detach from position
101
1-858-364-22
LOUD SPEAKER
102
4-166-134-01
BRACKET, SP (32R)
(KDL-32BX305
ONLY)
102
4-166-132-01
BRACKET, SP (40R)
(KDL-40BX405
ONLY)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
103
4-166-133-01
BRACKET, SP (32L)
(KDL-32BX305
ONLY)
103
4-166-131-01
BRACKET, SP (40L)
(KDL-40BX405
ONLY)
104
A-1753-637-A
HLR BOARD, MOUNTED
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
4-159-298-01
SCREW, +PSW M4X10
102
101
104
103
101
A
D
F
G
E
B
C
KDL-32BX305/40BX405
14
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
155
154
153
152
151
151
X-2547-958-1
BEZEL(32)ASSEMBLY
(KDL-32BX305
ONLY)
151
X-2548-050-1
BEZEL(40)ASSEMBLY
(KDL-40BX405
ONLY)
152
NA
LCD PANEL
FOR ALL LCD PANEL PART NUMBER INFORMATION
REFER TO THE LCD PANELS SERVICE MANUAL
153
4-175-711-01
BRACKET, SIDE JACK
(KDL-32BX305
ONLY)
153
4-166-286-21
BRACKET, SIDE JACK
(KDL-40BX405
ONLY)
154
A-1760-079-A
BAL BOARD, COMPLETE
(KDL-32BX305
ONLY)
NOTE: For BAL Board replacement, please refer to section
2-4. Adjustments After Replacing the BAL Board
NOTE: Final software is not installed on this BAL Board. Install the update after
replacing this board using the instructions provided with the software.
154
A-1760-099-A
BAL BOARD, COMPLETE
(KDL-40BX405
ONLY)
NOTE: For BAL Board replacement, please refer to section
2-4. Adjustments After Replacing the BAL Board
NOTE: Final software is not installed on this BAL Board. Install the update after
replacing this board using the instructions provided with the software.
155
A-1752-778-A
G2LE BOARD, COMPLETE
(KDL-32BX305
ONLY)
155
A-1752-780-A
G2HE BOARD, COMPLETE
(KDL-40BX405
ONLY)
2-580-592-01
SCREW, +PSW M3X8
(KDL-32BX305
ONLY)
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
REF. NO.
PART NO.
DESCRIPTION
[ASSEMBLY INCLUDES]
1-4. G2LE/G2HE (POWER) BOARD, BAL BOARD, AND LCD PANEL
A Remove 4 screws from G2LE/G2HE (Power) Boards
B Disconnect 3 connectors from G2LE/G2HE (Power) Boards
B Disconnect 3 connectors from G2LE/G2HE (Power) Boards
C Remove 4 screws from BAL Board
D Disconnect 5 connectors from BAL Board
D Disconnect 5 connectors from BAL Board
E Slide Side Jack Bracket to right-side to remove from BAL Board
F Carefully Lift up Panel to remove from Bezel
A
B
C
D
E
F
KDL-32BX305/40BX405
15
DISASSEMBLY/PART NUMBER INFORMATION
NOTE: The components identifi ed by shading
and
and
!
mark are critical for safety. Replace only
with part number specifi ed.
NOTE: The components identifi ed by a red outline and a mark contain
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
confi dential information. Specifi c instructions must be adhered to whenever
these components are repaired and/or replaced.
See Appendix A: Encryption Key Components in the back of this manual.
1-5. CLEANING THE LCD PANEL
CAUTION: When cleaning the TV, be sure to unplug the power cord to avoid any chance of electric shock.
Clean the cabinet of the TV with a dry soft cloth.
Wipe the LCD screen gently with a soft cloth.
Wipe the LCD screen gently with a soft cloth.
Stubborn stains may be removed with a cloth slightly moistened with a solution of mild soap and warm water.
If using a chemically pretreated cloth, please follow the instruction provided on the package.
Never use strong solvents such as a thinner, alcohol or benzine for cleaning.
Periodic vacuuming of the ventilation openings is recommended to ensure to proper ventilation.
1-6. SCREW
LEGEND
P/N
DESCRIPTION
REMARKS
TOTAL
Š
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
RC(10), SPKR BRKT-L to BEZ(1), SPKR BRKT-R to BEZ(1)
12
š
2-580-595-01
SCREW, +PSW M3X12
RC TOP-CENTER(2)
2
Ť
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
RC to TERMINAL AREA(1), RC to SIDE JACK BRKT(1), SPKR to SPKR BRKT-L(2), SPKR to SPKR BRKT-R(2)
6
ť
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(4)
4
Ū
2-580-592-01
SCREW, +PSW M3X8
BAL(4), G2LE(4)
8
Ũ
4-159-298-01
SCREW, +PSW M4X10
UC to BTM FRM(1), BTM FRM to PNL(2), NECK to BASE(3)
6
P/N
DESCRIPTION
REMARKS
TOTAL
Š
2-580-640-01
SCREW, +BVTP 4X16 TYPE2 IT-3
RC(8), SPKR BRKT-L to BEZ(1), SPKR BRKT-R to BEZ(1), BTM FRM to BEZ(2)
12
š
2-580-595-01
SCREW, +PSW M3X12
NOT IN THIS MODEL
0
Ť
7-685-648-79
SCREW, +BVTP 3X12 TYPE2 IT-3
RC to TERMINAL AREA(1), RC to SIDE JACK BRKT(1), SPKR to SPKR BRKT-L(2), SPKR to SPKR BRKT-R(2)
6
ť
2-580-608-01
SCREW, +PSW M5X16
TABLE-TOP STAND(4)
4
Ū
2-580-592-01
SCREW, +PSW M3X8
BAL(4), G2HE(4)
8
Ũ
4-159-298-01
SCREW, +PSW M4X10
RC TOP-CENTER(2), RC BTM-CENTER(2), UC to BTM FRM(1), BTM FRM to PNL(2), NECK to BASE(3)
10
KDL-32BX305
KDL-40BX405
Click on the first or last page to see other KDL-32BX305 service manuals if exist.