Sony KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 Service Manual ▷ View online
53
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-32S3000 ONLY
Attach ESD Grounding wire as shown
shown.
NOTE: 3x8mm AND 3x5mm Screws are
used!!
TORQUE: 6.0kg.cm (+-1.0kg.cm)
OPERATION PROCESS
TORQUE SPECIFICATION
Install
3x8mm
screw to GND Tab
on RIGHT VESA Bracket.
NOTE: This screw can be applied
off-line as pre-assembly operation.
NOTE: This screw can be applied
off-line as pre-assembly operation.
Install
3x5mm
screw to GND Tab
on panel above BH-Bd Shield Case.
2
1
3
DO NOT install
3x5mm
screw to
GND Tab on lower panel "dimple".
VESA BRACKET GROUND WIRE
54
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
×
OVERALL VIEW
KDL-40S3000 ONLY
55
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-40S3000 ONLY
1. Apply Sheet Core C to edge of Panel to
cover sharp edge of panel.
Use ribs on bezel (w/o screw boss) as a
guide to center tape.
2. Dress split (H3 & H4) in harness under
Cushion D Tape.
3. Route H3 and H4 harness as shown.
OPERATION PROCESS
Use rib on bezel as reference
to center Sheet Core C when applying
to panel edge.
to center Sheet Core C when applying
to panel edge.
Use UL Tapes as Reference to
position Harness over panel,
position Harness over panel,
1
2
3
Use H3/H4 Harness "Split" as reference
for top of Cushion D Position
(under Cushion D)
for top of Cushion D Position
(under Cushion D)
Use panel edge to align Himelon Tape.
H4-Bd Cable
H3 BOARD HARNESS
56
KDL-26S3000/32S3000/40S3000/46S3000
KDL-26S3000/32S3000/40S3000/46S3000
KDL-40S3000 ONLY
1. H4-Bd should be installed BEFORE the
speaker/baffles are installed
2. Be careful to align Plastic clip at left side
of bezel with notch in PWB.
3. PRESS FIRMLY on PWB next to clip to seat
H4-Bd. DO NOT USE Excessive force. PWB
or clip WILL BREAK!
Tape H4 wires to Bottom of panel edge.
OPERATION PROCESS
1
2
3
H4 BOARD
Click on the first or last page to see other KDL-26S3000 / KDL-32S3000 / KDL-40S3000 / KDL-46S3000 service manuals if exist.