Sony KDL-22EX320 / KDL-22EX325 / KDL-24EX320 / KDL-24EX325 / KDL-26EX320 / KDL-26EX321 / KDL-26EX325 / KDL-32EX425 / KDL-32EX523 / KDL-32EX524 / KDL-32EX525 / KDL-37EX521 / KDL-37EX524 / KDL-37EX525 / KDL-40EX523 / KDL-40EX524 / KDL-40EX525 / KDL-46EX520 / KDL Service Manual ▷ View online
KDL-22/24/26/32/37/40/46EX320,321,325,425,520,521,523,524,525(AEP/UK/RUSS)
81
KDL-22/24/26/32/37/40/46EX320,321,325,425,520,521,523,524,525(AEP/UK/RUSS)
2.Peel off the double sided tape
1.Release the bezel hooks.
(2) By slowly lifting the panel further up with one hand and pulling the bezel down with your other, the tape will
gradually loosen.
Please release the hooks both at the
top and sides. Install a cushion to
avoid the hooks making grip again.
top and sides. Install a cushion to
avoid the hooks making grip again.
Top
Side (L &R)
Cushion
(1) Pull up the panel and simultaneously push down the bezel like in the picture below.
APPENDIX-2
1. PROCEDURE TO REMOVE THE LCD PANEL FROM THE BEZEL ASSY
<22/24/26 inch>
When exchanging the LCD panel, the double-sided tapes between bezel assembly and LCD panel need to be peeled off.
Please follow the instructions below.
Please follow the instructions below.
NOTE: It is prohibited to PUSH the panel instead of PULLING, to prevent it from breaking.
KDL-22/24/26/32/37/40/46EX320,321,325,425,520,521,523,524,525(AEP/UK/RUSS)
82
KDL-22/24/26/32/37/40/46EX320,321,325,425,520,521,523,524,525(AEP/UK/RUSS)
APPENDIX-2
<32/37/40/55/60 inch>
2.Peel off the double sided tape
NOTE: It is prohibited to PUSH the panel instead of PULLING, to prevent it from breaking.
1. Remove the panel bracket
Remove the panel bracket by pushing the bezel
hook.
hook.
Pushing hook
Put off
(1) Unhook the LED board.
(2) Wearing protective gloves, put both hands in between the
panel and from aside. Simultaneously lift up the panel and
push down the bezel.
push down the bezel.
Should pull up
metal area,
should not cell area.
metal area,
should not cell area.
(3) By slowly lifting the panel further up with one hand and pulling the bezel down with your other, the tape will
gradually loosen.
Moving hands
step by step
step by step
KDL-22/24/26/32/37/40/46EX320,321,325,425,520,521,523,524,525(AEP/UK/RUSS)
83
KDL-22/24/26/32/37/40/46EX320,321,325,425,520,521,523,524,525(AEP/UK/RUSS)
Because the adhesive strength of double-sided tape weakens once peeled off, make sure to remove all tape from the bezel assembly and stick new
ones
ones
(P/N: 4-272-200-01).
1. Peel off all double-sided tape both on panel
and bezel side.
2. Adhere new double-sided tape.
NOTE: Before reattaching the panel, make sure you have removed all separation papers.
2. EXCHANGE THE DOUBLE SIDED TAPES
1position
5x440mm t=0.4
5x440mm t=0.4
22”
2position
5x240mm t=0.4
5x240mm t=0.4
26”
2position
5x240mm t=0.4
5x240mm t=0.4
24”
<22/24/26 inch>
APPENDIX-2
KDL-22/24/26/32/37/40/46EX320,321,325,425,520,521,523,524,525(AEP/UK/RUSS)
84
KDL-22/24/26/32/37/40/46EX320,321,325,425,520,521,523,524,525(AEP/UK/RUSS)
2position
5x290mm t=0.4
5x290mm t=0.4
2position
5x350mm t=0.4
5x350mm t=0.4
32”
37”
2position
5x380mm t=0.4
5x380mm t=0.4
40”
46”
3position
5x290mm t=0.4
5x290mm t=0.4
<32/37/40/46 inch>
APPENDIX-2
Because the adhesive strength of double-sided tape weakens once peeled off, make sure to remove all tape from the bezel assembly and stick new
ones
ones
(P/N: 4-272-200-01).
2. EXCHANGE THE DOUBLE SIDED TAPES
1. Peel off all double-sided tape both on panel
and bezel side.
2. Adhere new double-sided tape.
NOTE: Before reattaching the panel, make sure you have removed all separation papers.
Click on the first or last page to see other KDL-22EX320 / KDL-22EX325 / KDL-24EX320 / KDL-24EX325 / KDL-26EX320 / KDL-26EX321 / KDL-26EX325 / KDL-32EX425 / KDL-32EX523 / KDL-32EX524 / KDL-32EX525 / KDL-37EX521 / KDL-37EX524 / KDL-37EX525 / KDL-40EX523 / KDL-40EX524 / KDL-40EX525 / KDL-46EX520 / KDL service manuals if exist.