Sony KD-30XS955 Service Manual ▷ View online
46
KD-30XS955/34XBR960/34XS955/36XS955
KD-30XS955/34XBR960/34XS955/36XS955
3-10.HS SERVICE FLOWCHART
Confirm:
- Ik Protector
- Ik Protector
Refer to P. 45
YES
Is the spare part on
P. 47 changed?
Is DZ Board
changed?
NO
Start
Which category part
on P. 47 changed?
NO
YES
Finished with HV service
Confirm:
- HV
- HV Protector
- Ik Protector
- HV
- HV Protector
- Ik Protector
Refer to P. 44/45
Confirm:
- HV Protector
- HV Protector
Refer to P. 44/45
Confirm:
- B+
- B+
Refer to P. 44
Confirm:
- HV
- HV
Refer to P. 44/45
Confirm:
- B+
- Hold Down
- B+
- Hold Down
Refer to P. 44
Category A
Category B
Category C
Category D
Category E
47
KD-30XS955/34XBR960/34XS955/36XS955
KD-30XS955/34XBR960/34XS955/36XS955
Ref. #
Category
T8001
A
R8015
C
R8017
C
R8019
D
R8035
E
R8036
E
R8037
E
R8038
E
R8039
E
R8040
E
R8043
E
R8078
D
R8165
D
IC8005
C
IC8104
D
R8012
C
R8014
C
R8016
D
R8021
C
R8027
E
R8029
E
R8030
E
R8031
E
R8046
D
R8052
D
R8059
C
R8060
C
R8066
C
R8072
D
R8079
D
R8082
E
R6590
B
D8022
D
PH8003
C
Q8007
E
Q8008
E
IC8001
D
IC8002
C
IC8004
C
IC6503
B
HS SERVICE FLOWCHART TABLE
48
KD-30XS955/34XBR960/34XS955/36XS955
KD-30XS955/34XBR960/34XS955/36XS955
SECTION 4: CIRCUIT ADJUSTMENTS
4-1. SETTING SERVICE ADJUSTMENT MODE
1. Standby mode (Power off).
2. Press the following buttons on the remote commander within a
second of each other:
DISPLAY
Channel 5
Sound Volume +
Power
4-1.1. SERVICE ADJUSTMENT MODE IN
Disp.
(Item)
(Item)
Item
data
data
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
SERVICE
Mode
3. The CRT displays the item being adjusted.
4. Press 1 or 2 on the Remote Commander to select the item.
5. Press 3 or 6 on the Remote Commander to change the data.
6. Press MUTING then ENTER to write into memory.
4-1.2. SERVICE ADJUSTMENT MODE
MEMORY
Disp.
(Item)
(Item)
Item
data
data
SERVICE
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
ENTER
MUTING
Red
Green
1. Press 8 then ENTER on the Remote Commander to initialize.
Disp.
(Item)
(Item)
Item
data
data
WRITE
0
VP
HSIZ
HSIZ
7
TV
Item
order
order
8. DO NOT turn off set until SERVICE appears.
ELECTRICAL ADJUSTMENTS BY REMOTE COMMANDER
Use the Remote Commander (RM-Y199, RM-Y201) to perform the circuit adjustments in this section.
Test Equipment Required:
1. Pattern generator 2. Frequency counter 3. Digital multimeter 4. Audio oscillator
4-1.3. READING THE MEMORY
1. Enter into Service Mode.
2. Press 0 on the Remote Commander.
3. Press ENTER to read memory.
4-1.4. ADJUSTING THE PICTURE
1. Enter into Service Mode
2. Press 2 or 5 on the remote to select the device item.
3. Press 1 or 4 on the remote to select an item.
4. Press 3 or 6 on the remote to change the data.
5. Press MUTING then ENTER to write into memory.
4-1.5. RESETTING THE DATA
CAUTION: Be careful when using the remote! It will clear and re-
initialize ALL NVM data including defl ection adjustment data if not
reset properly as follows:
initialize ALL NVM data including defl ection adjustment data if not
reset properly as follows:
4-1.6. RESETTING THE MID NVM DATA
1. Enter into Service Mode.
2. Press 7 then JUMP , and then press ENTER on the remote.
4-1.7. RESETTING THE SYSTEM NVM DATA
1. Enter into Service Mode.
(This resets DEFL adjust and video white balance.)
2. Press 7 then 9 , and then press ENTER on the remote.
4-1.8. COPY FUNCTION
How to use copy function for DA4 Chassis:
• After writing your adjusted data into NVM, press MUTING
then ENTER to write into memory.
To copy change copy data from 0 to 1 then press MUTING then
ENTER again.
WARNING: DO NOT copy data before writing your corrected data in
NVM. If data is copied before writing corrected data, old
data will be copied.
data will be copied.
• CPY1: DF/DQP DATA
(CXA2170D-4 Item 6)
49
KD-30XS955/34XBR960/34XS955/36XS955
KD-30XS955/34XBR960/34XS955/36XS955
4-2. MEMORY WRITE CONFIRMATION METHOD
1. After adjustment, pull out the plug from the AC outlet, then replace the plug in the AC outlet again.
2. Turn the power switch ON and set to Service Mode.
3. Call the adjusted items again to confi rm they were adjusted.
4-3. REMOTE ADJUSTMENT BUTTONS AND INDICATORS
RM-Y201
(Enter into
memory)
memory)
MUTING
POWER
(Service Mode)
Disp. (Item Up)
1
Device (Item up)
2
Disp.(Item Down)
4
(Initialize)
8
VOLUME (+)
(Service Mode)
3
Item
(Data Up)
(Data Up)
6
Item
(Data Down)
(Data Down)
5
(Device Item
Down)
Down)
(Remove from
Memory)
Memory)
0
DISPLAY
(Service Mode)
Click on the first or last page to see other KD-30XS955 service manuals if exist.