Sony RM-PJ2 / VPL-ES1 Service Manual ▷ View online
1-4
VPL-ES1
1-3-4. Lens Gear
. Remove the C board. (Refer to 1-3-3.)
1-3-5. Fan Holder
ZOOM/FOCUS
ZOOM/FOCUS
2 Open the side panel assembly in the
direction of the arrow A.
direction of the arrow A.
4 Remove the Iens gear
in the direction of the arrow B.
in the direction of the arrow B.
3 Two dowels
A
B
1 Screw
(
(
+B 3 x 6)
C board
Lens gear
Lens
Engage the gears.
1 Two screws
(
(
+BVTP 3 x 10)
5 Remove the fan holder
while taking care so that it must
not be caught by other parts.
while taking care so that it must
not be caught by other parts.
4 Dowel
2 Remove the side panel assembly
in the direction of the arrow A.
in the direction of the arrow A.
3 Remove the four claws
in the direction of the arrow B.
in the direction of the arrow B.
A
B
Side panel assembly
Fan holder
1-5
VPL-ES1
1-3-6. D.C. Fan (60mm) and D.C. Fan (70mm)
. Remove the fan holder. (Refer to 1-3-5.)
1 Two grooves
4 Two grooves
2 D.C. fan (70mm)
5 D.C. fan (60mm)
CN811
C board
CN810
3 Remove the harneses
5 Lamp house
C board
2 Two screws
(
(
+BTP 3 x 10)
3 Lamp power supply
4 Screw
(
(
+BTP 3 x 10)
CN807
CN810
1 Remove the harneses
1-3-7. Lamp House
. Remove the fan holder. (Refer to 1-3-5.)
1-6
VPL-ES1
1-3-8. Optics Block Assembly
. To remove the optics block assembly, remove the related parts beforehand.
4 Four screws
(
(
+BTP 3 x 10)
5 Two dowels
6 Optics block assembly
C board
1 C board
• Remove the C board.
(Refer to 1-3-3.)
• Remove the C board.
(Refer to 1-3-3.)
3 Lamp house
• Remove the lamp house.
(Refer to 1-3-7.)
• Remove the lamp house.
(Refer to 1-3-7.)
2 Fan holder
• Remove the fan holder.
(Refer to 1-3-5.)
• Remove the fan holder.
(Refer to 1-3-5.)
1 Two precision screws
(
(
+B 2 x 5)
3 Screw
(
(
+PTP 2 x 8)
5 Radiation polarizer
(R) assembly
(R) assembly
6 Pre radiation polarizer
(G) assembly
(G) assembly
7 Radiation polarizer
(G) assembly
(G) assembly
9 Radiation polarizer
(B) assembly
(B) assembly
8 Pre radiation polarizer
(B) assembly
(B) assembly
4 Polarizer retainer
2 Prism block assembly
1-3-9. Prism Block Assembly
. Remove the optics block assembly. (Refer to 1-3-8.)
1-7
VPL-ES1
5 Incidence polarizer (B) assembly
3 Incidence polarizer (R) assembly
4 Incidence polarizer (G) assembly
2 Unit cover
1 Six screws
(
(
+BTP 3 x 10)
1-3-10. Incidence Polarizer (R), (G), (B)
. Remove the optics unit assembly. (Refer to 1-3-8.)
. Remove the prism block assembly. (Refer to 1-3-9.)
. Remove the prism block assembly. (Refer to 1-3-9.)
Click on the first or last page to see other RM-PJ2 / VPL-ES1 service manuals if exist.