DOWNLOAD Sony IFU-HS1 / RM-PJHS1 / SU-HS1 / VPL-HS1 / VPL-HS1FP Service Manual ↓ Size: 13.71 MB | Pages: 127 in PDF or view online for FREE

1-15

VPL-HS1

GB 

28

Rotating a Still Picture

M

m

<

,

The Index menu appears.

M

m

The selected picture is projected to fit the 
screen.

To display the next slide, press , or m. To return to 
the previous slide, press < or M.

Press MS SLIDE or ENTER.

You can rotate a still picture in 90

°

 steps.

1

M

m

The index pictures of the selected contents are 
displayed.

Full Screen

Close

Return

Protect

Rotate

Startup

Delete

R e c i i p e 

f l o u r - - - - 2

s u g a r  -  -  -  1/ 2

s a l t - - - - - 1/ 2

b u t t e r - - - 1

29

 GB

Protecting an Important Still Picture

M

m

<

,

The Index menu appears.

M

m

M

m

The picture rotates 90

°

 every pressing of the 

ENTER button.

• You cannot rotate a picture which is protected. (

 right 

column) 
To rotate it, release the protection on that picture.

• When the write-protect tab on the “Memory Stick” is set to 

LOCK, you cannot rotate the pictures stored in that “Memory 
Stick.”

You can protect a still picture to prevent it from 
accidental erasure.

1

M

m

The index pictures of the selected contents are 
displayed.

Full Screen

Close

Return

Protect

Rotate

Startup

Delete

R e c i i p e 

f l o u r - - - - 2

s u g a r  -  -  -  1/ 2

s a l t - - - - - 1/ 2

b u t t e r  -  -  - 1

1-16

VPL-HS1

GB 

30

Projecting a Selected Picture When the Power Is Turned On — Startup

M

m

<

,

The Index menu appears.

M

m

M

m

 A picture selected on the Index screen is 

protected.

 All the pictures in the selected contents 

are protected.

The protect mark appears  in the Index menu for 
the protected picture. 

Select “Off” or “All off” in step 

. 

Selecting “Off” releases the protection for the 
selected picture. Selecting “All off” releases the 
protection for all the pictures in the selected contents.

When the projector is turned on, the specific still 
picture stored in the projector is projected 
automatically for about one minute, even if no signal 
is input. You can change this still picture to the one 
you prefer.

When you want to use a picture stored in your 
“Memory Stick” as the startup picture, register the 
picture in the “Memory Stick.”

1

M

m

The index pictures of the selected contents are 
displayed.

Full Screen

Close

Return

Protect

Rotate

Startup

Delete

R e c i i p e 

f l o u r - - - - 2

s u g a r  -  -  -  1/ 2

s a l t - - - - - 1/ 2

b u t t e r - - - 1

31

 GB

Projecting a Selected Picture When the Power Is Turned On — Startup

M

m

<

,

The Index menu appears.

M

m

M

m

The startup mark is displayed in the Index menu.
You can register one picture used for the startup 
picture, per one “Memory Stick.”

1

M

m

M

m

Full Screen

Close

Return

Protect

Rotate

Startup

Delete

R e c i i p e 

f l o u r  -  -  -  -  2

s u g a r  -  -  -  1/ 2

s a l t - - - - - 1/ 2

b u t t e r - - - 1

+

–

+

–

Original

Custom

Off

SETTING

Startup:

Original

1-17

VPL-HS1

GB 

32

Deleting a Still Picture

M

m

 Select to use the original picture 

stored in the projector. This is the factory 
setting.

 Select to use the picture registered in 

the index screen and stored in the “Memory 
Stick.” (1 page 30)

 Select when you do not set the startup.

• When you want to clear the startup screen while displaying it, 

press M/m/</,, or ENTER.

• When you are using the registered picture, insert the “Memory 

Stick” where the registered picture is saved into the projector, 
then turn on the power.

You can delete unnecessary picture from the 
“Memory Stick.”

1

M

m

The index pictures of the selected contents are 
displayed.

M

m

<

,

The Index menu appears.

M

m

M

m

M

 delete the selected picture

 delete all pictures of the selected 

contents

 when you do not delete the picture

• You cannot delete the picture which is protected. (1 page 29) 

To delete it, release the protection on that picture.

• When the write-protect tab on the “Memory Stick” is set to 

LOCK, you cannot delete the pictures from that “Memory 
Stick.”

Full Screen

Close

Return

Protect

Rotate

Startup

Delete

R e c i i p e 

f l o u r - - - - 2

s u g a r  -  -  -  1/ 2

s a l t - - - - - 1/ 2

b u t t e r - - - 1

33

 GB

Initializing a “Memory Stick”

When a “Memory Stick” cannot be used, initialize it 
by the projector.
All the data stored in a “Memory Stick” is cleared 
when the “Memory Stick” is initialized.

1

M

m

M

m

M

Select “Return,” and press ENTER in step 

.

• When the “Memory Stick” is initialized, the protected picture 

is also cleared.

• When the “Memory Stick” with the write-protect tab set to 

LOCK is initialized, the message “MEMORY STICK locked” 
is displayed.

• While initializing the “Memory Stick,” you cannot use the 

buttons for operation in MS home.

+

–

+

–

Execute

Return

MEMORY STICK

Format

1-18

VPL-HS1

GB 

34

Troubleshooting

This section describes how to solve the problems, how to 
replace a lamp and air filter, etc.

The power is not turned on.

• The power has been turned off and on with the @/ 1 (on/standby) switch at a 

short interval.
c Wait for about one minute before turning on the power (1 page 15).

• The lamp cover is detached.

c Close the lamp cover securely (1 page 38).

• The air filter cover is detached.

c Close the air filter cover securely (1 page 39).

No picture.

• Cable is disconnected or the connections are wrong.

c Check that the proper connections have been made (1 pages 8 and 9).

• Input selection is incorrect.

c Select the input source correctly using the INPUT button (1 page 15).

• The computer signal is not set to output to an external monitor.

c Set the computer signal to output to an external monitor.

• The computer signal is set to output to both the LCD of the computer and 

external monitor.
c Set the computer signal to output only to the external monitor.

The picture from the PJ MULTI 
connector is colored strange.

• Setting for INPUT-A in the SET SETTING 

 menu is incorrect.

c Select COMPUTER, COMPONENT or VIDEO GBR for INPUT-A in the 

SET SETTING 

 menu according to the input signal (1 page 20).

Color balance is incorrect.

• Picture has not been adjusted properly.

c Adjust the picture in the PICTURE CTRL 

 menu (1 page 19).

• Projector is set to wrong color system.

c Set COLOR SYS in the PICTURE CTRL 

 menu to match the color 

system being input (1 page 19).

The picture is too dark.

• Contrast or brightness has not been adjusted properly.

c Adjust the contrast or brightness in the PICTURE CTRL 

 menu properly 

(1 page 19).

The picture is not clear.

• Picture is out of focus.

c Adjust the focus with the focus lever (1 page 15).

• The lens cap is attached to the lens.

c Remove the lens cap.

• Condensation has occurred on the lens.

c Leave the projector for about two hours with the power on.

35

 GB

Troubleshooting

The picture flickers.

• DOT PHASE in the INPUT SETTING 

 menu has not been adjusted 

properly.
c Adjust DOT PHASE in the INPUT SETTING 

 menu properly (1 page 

19).

On-screen display does not appear.

• STATUS in the SET SETTING 

 menu is set to OFF.

c Set STATUS in the SET SETTING 

 menu to ON (1 page 20).

No sound.

• Cable is disconnected or the connections are wrong.

c Check that the proper connections have been made (1 pages 8 and 9).

• VOLUME setting is not correct.

c Adjust VOLUME in the PICTURE CTRL 

 menu, or press VOLUME + on 

the remote control.

When sound is input through the 
AUDIO connector, sound comes 
through one channel only.

• Monaural sound is being input through the AUDIO connector.

c Input stereo sound.

The remote control does not work.

• Batteries cound be weak.

c Replace the batteries (1 page 5).

• The polarity is not correct.

c Insert the batteries with correct polarities (1 page 5).

The “Memory Stick” cannot be inserted 
into the “Memory Stick” slot.

• The “Memory Stick” is not facing in the correct direction.

c Insert the “Memory Stick” with the arrow mark pointing toward the “Memory 

Stick” slot of the projector.

A still picture in the “Memory Stick” 
cannot be rotated or deleted.

• The write-protect tab on the “Memory Stick” has been set to LOCK.

c Cancel the lock (1 page 22).

• The picture is protected.

c Release the protect in the Index screen (1 page 29).

The “Memory Stick” cannot be 
formatted.

• The write-protect tab on the “Memory Stick” has been set to LOCK.

c Cancel the lock (1 page 22).

• The “Memory Stick” is broken.

c Use another “Memory Stick”.

When the slide show is made, the MS 
flashes.

• Pictures with different resolutions are used for the slide show.

c Set STATUS of the SET SETTING 

 menu to OFF (1 page 20).

When the slide show is made, a black 
picture appears.

• When pictures with different resolutions are used, a black picture appears. 

c Set the resolution of the pictures to the same setting.

The thumbnails are not displayed.

• The pictures are the JPEG format but not DCF-compatible.

c Use the DCF-compatible pictures.