Sony HDR-HC1 / HDR-HC1E / HDR-HC1EK / HDR-HC1K (serv.man4) Service Manual ▷ View online
6-3
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Table 6-1-1 (2)
Note 2: When the repair is finished,
confirm the following items.
1. Shoot the all black subject (Attach
the lens cap and shoot), and con-
firm that a vertical line is not dis-
played in the center of the screen,
and that there is no difference in
left-right brightness level of the
screen.
firm that a vertical line is not dis-
played in the center of the screen,
and that there is no difference in
left-right brightness level of the
screen.
2. Shoot a subject of low light, and
confirm that a vertical line is not
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
3. Shoot a subject of normal light, and
confirm that a vertical line is not
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
When the above symptom occurs,
perform the whole process of “Im-
age Sensor Output 2ch Matching
Adjustment”.
displayed in the center of the
screen, and that there is no differ-
ence in left-right brightness level
of the screen.
When the above symptom occurs,
perform the whole process of “Im-
age Sensor Output 2ch Matching
Adjustment”.
Note 3: IC4802 (HI/DS control with
built-in flash memory) on the
TT-001 board cannot be re-
placed.
TT-001 board cannot be re-
placed.
Replaced part
Adjustment Section
Adjustment
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE)
(EEPROM)
(EEPROM)
(EEPROM)
EE-001 board
TT-001 board
NN-001 board
UU-001 board
PP-001 board
TT-001 board IC4801
TT-001 board IC5402
TT-001 board IC5801
Supporting
Initialization of
Initialization of A, B, D, 1A, 1B page data
z
z
EEPROM data
Initialization of 8, C, 13, 18, 1C page data
z
z
Initialization of 9, 1D page data
z
z
Initialization of F, 63 to 6F page data
Camera
Origin oscillation check
z
HALL adj.
z
z
z
MR adj.
z
z
z
Image sensor output 2ch matching adj.
z
z
z
z
Flange back and zoom lever center adj.
z
z
z
z
F No. & ND light quality standard data input
z
z
z
Mechanical shutter adj.
z
z
z
Auto white balance standard data input
z
z
z
z
LV standard data input
z
z
z
z
Auto white balance adj.
z
z
z
z
Color reproduction adj.
z
z
z
z
PCGM standard data input
z
z
z
z
MAX GAIN adj.
z
z
z
z
White defect Adj.
z
z
z
z
Black defect Adj.
z
z
z
z
Strobe light level adj.
z
z
z
Strobe white balance adj.
z
z
z
Steadyshot check
z
z
z
z
EVF
VCO adj.
z
z
z
Back light adj.
z
z
z
z
PSIG adj.
z
z
z
V-COM level adj.
z
z
z
RGB AMP adj.
z
z
z
Contrast adj.
z
z
z
White balance adj.
z
z
z
z
LCD
LCD automatic adj.
z
z
z
z
V-COM adj.
z
z
z
Transmissive mode white balance adj.
z
z
z
Reflective mode white balance adj.
z
z
z
z
Touch panel adj.
z
z
Mechanism
Tape path adj.
System control
Node uniqe ID No. input
z
z
Servo, RF
CAP FG duty adj.
z
z
z
Switching position adj.
z
z
z
Error rate check
z
z
z
z
Video
S VIDEO OUT Y level adj.
z
z
S VIDEO OUT chroma level adj.
z
z
COMPONENT OUT Y level adj.
z
z
COMPONENT OUT Pr level adj.
z
z
COMPONENT OUT Pb level adj.
z
z
R
a
d
a
rW
R
a
d
a
rW
RadarW
Replaced part
Adjustment Section
Adjustment
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE)
(COMPLETE)
(EEPROM)
(EEPROM)
(EEPROM)
EE-001 board
TT-001 board
NN-001 board
UU-001 board
PP-001 board
TT-001 board IC4801
TT-001 board IC5402
TT-001 board IC5801
Supporting
Initialization of
Initialization of A, B, D, 1A, 1B page data
z
z
EEPROM data
Initialization of 8, C, 13, 18, 1C page data
z
z
Initialization of 9, 1D page data
z
z
Initialization of F, 63 to 6F page data
Camera
Origin oscillation check
z
HALL adj.
z
z
z
MR adj.
z
z
z
Image sensor output 2ch matching adj.
z
z
z
z
Flange back and zoom lever center adj.
z
z
z
z
F No. & ND light quality standard data input
z
z
z
Mechanical shutter adj.
z
z
z
Auto white balance standard data input
z
z
z
z
LV standard data input
z
z
z
z
Auto white balance adj.
z
z
z
z
Color reproduction adj.
z
z
z
z
PCGM standard data input
z
z
z
z
MAX GAIN adj.
z
z
z
z
White defect Adj.
z
z
z
z
Black defect Adj.
z
z
z
z
Strobe light level adj.
z
z
z
Strobe white balance adj.
z
z
z
Steadyshot check
z
z
z
z
EVF
VCO adj.
z
z
z
Back light adj.
z
z
z
z
PSIG adj.
z
z
z
V-COM level adj.
z
z
z
RGB AMP adj.
z
z
z
Contrast adj.
z
z
z
White balance adj.
z
z
z
z
LCD
LCD automatic adj.
z
z
z
z
V-COM adj.
z
z
z
Transmissive mode white balance adj.
z
z
z
Reflective mode white balance adj.
z
z
z
z
z
z
Touch panel adj.
z
z
Mechanism
Tape path adj.
System control
Node uniqe ID No. input
z
z
Servo, RF
CAP FG duty adj.
z
z
z
Switching position adj.
z
z
z
Error rate check
z
z
z
z
Video
S VIDEO OUT Y level adj.
z
z
S VIDEO OUT chroma level adj.
z
z
COMPONENT OUT Y level adj.
z
z
COMPONENT OUT Pr level adj.
z
z
COMPONENT OUT Pb level adj.
z
z
6-4
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
Fig. 6-1-1
1-2. List of service tools
• Oscilloscope
• Oscilloscope
• Color monitor
• Vectorscope
• Digital voltmeter
• Frequency counter
• Audio level meter
J-12
Tracking standard
(XH2-1)
8-967-997-01
(XH2-1)
8-967-997-01
J-13
SW/OL standard
(XH2-3)
8-967-997-11
(XH2-3)
8-967-997-11
J-14
Audio operation check
for NTSC (XH5-3)
8-967-997-51
8-967-997-51
for PAL (XH5-3P)
8-967-997-55
8-967-997-55
J-8
J-10
J-7
J-5
Pattern box PTB-450
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-6082-200-A
or
Small pattern box
PTB-1450
J-6082-557-A
J-2
Color bar chart
For PTB-450:
J-6020-250-A
J-6020-250-A
For PTB-1450:
J-6082-559-A
J-6082-559-A
J-3
Clear chart
For PTB-450:
J-6080-621-A
J-6080-621-A
For PTB-1450:
J-6082-560-A
J-6082-560-A
J-4
Minipattern box
J-6082-353-B
J-6082-353-B
Siemens star chart
J-6080-875-A
J-6080-875-A
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
Back ground paper
J-2501-130-A
J-2501-130-A
J-9
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
J-6
Flange back
adjustment jig
J-6082-563-A
adjustment jig
J-6082-563-A
J-11
Camera table
J-6082-384-A
J-6082-384-A
J-1
Adjustment remote
commander
J-6082-053-B
commander
J-6082-053-B
J-15
System operation check
for NTSC (XH5-5)
8-967-997-61
8-967-997-61
for PAL (XH5-5P)
8-967-997-66
8-967-997-66
AC power adaptor
1-479-283-12
1-479-283-12
J-17
CPC-7 jig
J-6082-382-A
J-6082-382-A
J-16
6-5
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
6-1. CAMERA SECTION ADJUSTMENTS
1-1.
PREPARATIONS BEFORE ADJUSTMENTS (CAMERA SECTION)
1-1-1.
Preparations
Note: Before perform the adjustment, check that the data of page:
0, address: 10 is “00”.
If not, select page: 0, address: 10, and set data “00”.
If not, select page: 0, address: 10, and set data “00”.
1) Connect the equipment for adjustments according to Fig. 6-1-3.
Pattern box
Front of the lens
L = 1 m (PTB-450)
L = 40 cm (PTB-1450)
L = 40 cm (PTB-1450)
L
Camera
Fig. 6-1-2
Fig. 6-1-3
1
16
LANC jack
A/V jack
Audio L
(White)
Audio R
(Red)
Video
(Yellow)
S Video
(Black)
Color monitor
Vectorscope
Terminated
75
Ω
Adjustment remote
commander (RM-95)
commander (RM-95)
AC IN
DC IN jack
AC adaptor
1
TT-001 board
NN-001 board
CN7005
16
CPC-7 jig
(J-6082-382-A)
(J-6082-382-A)
EVF system adjustment
6-6
HDR-HC1/HC1E/HC1K/HC1EK_ADJ
Fig. b (monitor TV picture)
1-1-2. Precaution
1.
1.
Setting the Switch
Unless otherwise specified, set the switches as follows and perform adjustments without loading cassette.
1.
POWER switch (PS12300 block) .............. CAMERA-TAPE
2.
BACK LIGHT (CK12300 block) ................................... OFF
3.
FOCUS switch (CK12300 block) ........................ MANUAL
4.
EXPOSE switch (CK12300 block) ............................. AUTO
5.
NIGHT SHOT switch (FP-245 flexble) ......................... OFF
6.
PROGRAM AE (MENU setting) ................................ AUTO
7.
SPOT METER (MENU setting) ................................. AUTO
8.
WHITE BAL. (MENU setting) ................................... AUTO
9.
AE SHIFT (MENU setting) ................................................. 0
10. WB SHIFT (MENU setting) ................................................ 0
11. COLOR SLOWS (MENU setting) ................................. OFF
12. DIGITAL ZOOM (MENU setting) ................................ OFF
13. STEADY SHOT (MENU setting) .................................. OFF
14. DIGITAL EFFECT (MENU setting) ............................. OFF
15. PICTURE EFFECT (MENU setting) ............................ OFF
16. DEMO MODE (MENU setting) .................................... OFF
17. REC FORMAT (MENU setting) ......................... HDV 1080i
11. COLOR SLOWS (MENU setting) ................................. OFF
12. DIGITAL ZOOM (MENU setting) ................................ OFF
13. STEADY SHOT (MENU setting) .................................. OFF
14. DIGITAL EFFECT (MENU setting) ............................. OFF
15. PICTURE EFFECT (MENU setting) ............................ OFF
16. DEMO MODE (MENU setting) .................................... OFF
17. REC FORMAT (MENU setting) ......................... HDV 1080i
3. Subjects
1)
1)
Color bar chart (Color reproduction adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)
When performing adjustments using the color bar chart, adjust
the picture frame as shown in Fig. 6-1-4. (Color reproduction
adjustment frame)
2)
Clear chart (All whire frame)
Remove the color bar chart from pattern box and insert a clear
chart in its place. (Then adjust the zoom to TELE side from
WIDE side, and stop it when the black frame of the chart
disappears.)
Remove the color bar chart from pattern box and insert a clear
chart in its place. (Then adjust the zoom to TELE side from
WIDE side, and stop it when the black frame of the chart
disappears.)
3) Chart for flange back adjustment
Join together a piece of white A0 size paper (1189mm
× 841
mm) and a piece of black paper to make the chart shown in
Fig. 6-1-5.
Fig. 6-1-5.
Note: Use a non-reflecting and non-glazing vellum paper. The
size must be A0 or larger and the joint between the white
and black paper must not have any undulations.
and black paper must not have any undulations.
Fig. 6-1-5
Black
White
841 mm
1189 mm
H
A=B
A B
B A
Enlargement
B
A
Difference in level
Y
ellow
Cyan
Green
White
Magenta
Red
Blue
C = D = 0
V
C
D
Y
ellow
Cyan
Blue
Green
White
Magenta
Red
CRT picture frame
Electronic beam scanning frame
Color bar chart (Color reproduction adjustment frame)
Fig. a
(VIDEO terminal of A/V jack
output waveform)
(VIDEO terminal of A/V jack
output waveform)
Adjust the camera zoom and direction to
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.
obtain the output waveform shown in Fig. a and
the monitor TV display shown in Fig. b.
2.
Order of Adjustments
Basically carry out adjustments in the order given.
Fig. 6-1-4
Click on the first or last page to see other HDR-HC1 / HDR-HC1E / HDR-HC1EK / HDR-HC1K (serv.man4) service manuals if exist.