Sony HDR-CX620 / HDR-CX670 / HDR-PJ620 / HDR-PJ670 Service Manual ▷ View online
Projector problem checking procedure (indication on brightness)
Yes
No
OK
NG
OK
NG
OK
NG
A
B
Indicated defective
projector received
Measure brightness.
( 2)
Measure brightness.
( 2)
Indication on
brightness
Inspect projector
LED.
( 1)
1 Refer to the ADJUST tab of Adjust Manual.
2 Refer to the SERVICE tab of Adjust Manual.
2 Refer to the SERVICE tab of Adjust Manual.
END
-
-
-
-
-
-
-
Replace projector unit (light emitting block). (*1)
Replace PJ board. (*1)
Replace both projector unit (light emitting block)
and PJ board. (*1)
Replace PJ board. (*1)
Replace both projector unit (light emitting block)
and PJ board. (*1)
Projector Data Input
Fixed value input
Enter the number on the label attached to the unit.
Enter the number on the label attached to the unit.
Serial number input
LD40
LD40
Syywwnnnnn
Enter the red part.
HDR-CX620/HDR-CX670/HDR-PJ620/HDR-PJ670
2-9
Section 3
Adjustment
For adjusting these models, the Adjust Station and the Adjust Manual are required.
Adjust Station
It is the software to start up Adjust Manual for each model.
The installer of the Adjust Station and the installation manual are attached, be sure to confirm the contents of them.
The installer of the Adjust Station and the installation manual are attached, be sure to confirm the contents of them.
Adjust Manual
It is the software to adjust and check digital cameras and camcorders for service.
The installer of the Adjust Manual and the installation manual are attached, be sure to confirm the contents of them.
The installer of the Adjust Manual and the installation manual are attached, be sure to confirm the contents of them.
Note
Be sure to install Adjust Station first.
HDR-CX620/HDR-CX670/HDR-PJ620/HDR-PJ670
3-1
Click on the first or last page to see other HDR-CX620 / HDR-CX670 / HDR-PJ620 / HDR-PJ670 service manuals if exist.