Sony HDR-CX405 / HDR-CX440 / HDR-PJ410 / HDR-PJ440 Service Manual ▷ View online
2-3.
Precaution on Replacing the VC-1023 Board
The board for repair is not recorded the information unique to a model. Therefore the following data are needed to write.
Note
The [LOAD AND WRITE] function in “ADJUSTMENT DATA BACKUP” on the DATA tab in the Adjust Manual
overwrites all data of the unit. Therefore execute the [LOAD AND WRITE] before performing the following operation.
overwrites all data of the unit. Therefore execute the [LOAD AND WRITE] before performing the following operation.
2-3-1.
Destination Data
The destination data stored in the repairing board is different from the destination setting stored in the board before
replacement in some cases.
When the board has been replaced with a repairing board, be sure to set the destination.
replacement in some cases.
When the board has been replaced with a repairing board, be sure to set the destination.
Method of the destination data write:
Start the Adjust Manual in the Adjust Station and execute the “Destination data write” on the ADJUST tab.
2-3-2.
USB Serial Save
When you replace to the repairing board, get the USB serial number from the former one.
Method of the USB serial save:
Start the Adjust Manual in the Adjust Station and execute the “USB serial save” on the DATA tab.
2-3-3.
USB Serial No. and Product ID
The unit is shipped after an ID (USB Serial No.) unique to each unit and an ID (Product ID) unique to each model have
been written.
These IDs have not been written in a new repairing board. Therefore, after the board has been replaced, be sure to write
these IDs to a new repairing board.
been written.
These IDs have not been written in a new repairing board. Therefore, after the board has been replaced, be sure to write
these IDs to a new repairing board.
Method of the ID writing:
Start the Adjust Manual in the Adjust Station and execute the “PRODUCT ID & USB SERIAL No. INPUT” on
the ADJUST tab.
the ADJUST tab.
2-3-4.
Restore Data (Projector Model)
Before replacing the board with a repairing board, be sure to extract the following data from the former one.
• Fixed value (that shows irradiation performance of the projector)
• Serial number of the projector unit
• Serial number of the projector unit
Method of the data extracting:
Start the Adjust Manual in the Adjust Station and execute the “Projector Data Reference” on the DATA tab.
2-3-5.
Update of MAC Address
When a board that contains Wi-Fi has been replaced or when replacing a board that contains the main IC (CPU), the
IC’s unique number (MAC address) must be reloaded.
IC’s unique number (MAC address) must be reloaded.
HDR-CX405/HDR-CX440/HDR-PJ410/HDR-PJ440
2-3
Procedure of the MAC address update:
Note
Perform the below operations after all work has been done.
1.
Start the Adjust Manual in the Adjust Station and execute the “Wireless LAN Setting (MAC Address)” on
the ADJUST tab.
the ADJUST tab.
2.
Operate the unit to initialize of SSID/PW.
Applicable parts:
• VC-1023 BOARD, COMPLETE (SERVICE)
• WF-1004 BOARD, COMPLETE
• WF-1004 BOARD, COMPLETE
Note
After the replacement and repair, the MAC address is changed, and thus the re-setting for connection devices is required.
Accordingly, download the Flyer of WLAN Reset (Flyer of WLAN Reset_9834752[][].pdf) and print out it, and attach
it to the set when returning the set to customer.
Accordingly, download the Flyer of WLAN Reset (Flyer of WLAN Reset_9834752[][].pdf) and print out it, and attach
it to the set when returning the set to customer.
2-3-6.
Notes on the Internal Memory
After the board replacement, execute the procedure below first.
• Start the Adjust Manual in the Adjust Station and execute the “Destination data write” on the ADJUST tab.
• Execute the script files below. (Refer to the flowchart in following figure.)
• Execute the script files below. (Refer to the flowchart in following figure.)
- [][]DdmMmcReadTestMINI_v[].vbe
- [][]DdmMmcMakePartition_v[].vbe
- [][]DdmMmcMakePartition_v[].vbe
Method of the script file acquiring:
Start the Adjust Manual in the Adjust Station and reference the “INTERNAL MEMORY ADJUSTMENTS” on
the ADJUST tab.
the ADJUST tab.
Unless these script files are executed, the following symptoms may appear. Make sure execute the above script files.
• The internal memory is not recognized as a media.
• The management file saved in the internal memory cannot be repaired.
• The internal memory cannot be formatted.
• The management file saved in the internal memory cannot be repaired.
• The internal memory cannot be formatted.
HDR-CX405/HDR-CX440/HDR-PJ410/HDR-PJ440
2-4
START
END
Reactive the camcorder automatically
Disconnect the USB cable,
and turn off the power switch.
Select the "USB CONNECT" to establish
the connection
Execute
the "[][]DdmMmcReadTestMINI_v[].vbe"
(several seconds later)
"SetOverallReadMINI OK" is displayed.
(10 seconds later)
Reactive the camcorder automatically
Execute
the "[][]DdmMmcMakePartition_v[].vbe"
(several seconds later)
"MakePartition OK" is displayed.
During the power is turning-on,
pull-out the AC-adaptor.
Then connect the AC-adaptor Again.
The process is executed automatically.
(It's running with blue color monitor.)
Connect the unit to the PC with a USB
cable, and turn on the power switch.
* PC is installed SeusEX already,
and it can connect to the SeusEX.
HDR-CX405/HDR-CX440/HDR-PJ410/HDR-PJ440
2-5
2-4.
Checking the Wi-Fi Function
After this unit has been disassembled and reassembled, check the Wi-Fi function.
Required equipment:
Windows PC or smartphone with Wi-Fi interface
Procedure:
1.
Turn on the power of the unit and enable the Wi-Fi function.
(Upon completion of the preparation for Wi-Fi connection, the password for Wi-Fi connection is displayed.)
(Upon completion of the preparation for Wi-Fi connection, the password for Wi-Fi connection is displayed.)
2.
Confirm on the PC or the smartphone that the unit is detected as a connectable wireless network.
HDR-CX405/HDR-CX440/HDR-PJ410/HDR-PJ440
2-6
Click on the first or last page to see other HDR-CX405 / HDR-CX440 / HDR-PJ410 / HDR-PJ440 service manuals if exist.