Sony HDR-CX11E / HDR-CX12 / HDR-CX12E (serv.man3) Service Manual ▷ View online
6-8
HDR-CX11E/CX12/CX12E_ADJ
4.
Setting of Adjustment Mode
Before performing the adjustment, “Setting of Adjustment Mode”
is required.
is required.
[Setting method]
1) Connect the Camcorder to the PC with a USB cable, and turn
1) Connect the Camcorder to the PC with a USB cable, and turn
on the power switch.
2) The USB SELECT menu will appear on the LCD screen of
the Camcorder, and then select “USB CONNECT” to estab-
lish the connection.
lish the connection.
3) Start the Automatic Adjustment Program, and click the [Con-
nect] button on the Main Menu screen.
4) When the following message is displayed, turn off and on again
the power switch of the Camcorder.
Note:
Turning off and on the power switch causes the
Camcorder to be switched to the Adjustment Mode.
After the Camcorder restarted, click the [OK] button in
the message window.
Camcorder to be switched to the Adjustment Mode.
After the Camcorder restarted, click the [OK] button in
the message window.
5) Upon successful completion of the settings in the Adjustment
Mode, the operation of each button on the Main Menu screen
is enabled.
is enabled.
5.
Release of Adjustment Mode
To finish the adjustment, be sure to perform “Release of Adjust-
ment Mode”.
ment Mode”.
[Releasing method]
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
1) Click the [END] button on the Main Menu screen.
2) When the following message is displayed, releasing of adjust-
ment mode has completed. Click the [OK] button in the mes-
sage window to exit the Automatic Adjustment Program.
sage window to exit the Automatic Adjustment Program.
Note:
The Camcorder switches to the normal mode by turn-
ing off and on the power switch. After the adjustment
finished, turn off and on again the power switch of the
Camcorder to confirm that the USB SELECT menu is
displayed.
ing off and on the power switch. After the adjustment
finished, turn off and on again the power switch of the
Camcorder to confirm that the USB SELECT menu is
displayed.
6-9
HDR-CX11E/CX12/CX12E_ADJ
1-3.
DESTINATION DATA WRITE
Note:
The DESTINATION DATA WRITE can be set with the
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
Service board only.
Performing the DESTINATION DATA WRITE with other
than the Service board causes the error (E:20:00 will be
blinking) and the power to be shut down.
1.
Function of Each Button on Destination Data Write
Screen
Screen
Click the [DESTINATION DATA WRITE] button on the Main Menu
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-10 will appear.
screen, and the “DESTNATION DATA WRITE” screen in Fig. 6-
1-10 will appear.
Fig. 6-1-10
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Destination Check button
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.
Current destination setting checked when the “DESTINATION
DATA WRITE” screen started is displayed.
When this button is clicked, the destination is checked and the
display is updated.
3
Model Name List
Selects the model name.
Selects the model name.
4
Destination List
Selects the written destination.
Selects the written destination.
5
[Data Write] button
Write the destination data to the camcorder.
Write the destination data to the camcorder.
2.
Destination Data Write
[Writing method]
1) Select the model name from the pulldown list.
1) Select the model name from the pulldown list.
2) Select the target destination from the pulldown list.
3) Click the [Data Write] button.
4) Following message will be appeared after completing data
writing.
5) After the destination data writing completed, click the Desti-
nation Check button to check the destination.
4
3
5
1
2
6-10
HDR-CX11E/CX12/CX12E_ADJ
Table 6-1-2
3.
Selectable Language Table
English
Japanese
French
Italian
German
Spanish
Dutch
Russian
Simplified Chinese
Portuguese
Greek
Braz.Portuguese
Canadian French
Espanyol
Traditional Chinese
Korean
Simplified English
Arabic
Persian
Thai
Turkish
Polish
Czech
Hungarian
Indonesia
Melayu
J1
J
z
U2
US
z
a
a
a
a
E23
E
z
a
a
a
a
a
a
KR2
KR
a
a
a
a
a
z
a
JE3
JE
z
a
a
a
a
a
a
CA2
CND
z
a
a
a
a
a
a
E34
E
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
HK1
HK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
AU2
AUS
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CN2
CH
a
a
a
a
a
a
a
z
a
a
a
a
a
a
a
a
a
JE3
JE
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEL
NE
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEN
AEP
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
CEH
UK
z
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
z
: INITIAL LANGUAGE
NTSC model
PAL model
DESTINATION
SELECTABLE LANGUAGE
AREA
6-11
HDR-CX11E/CX12/CX12E_ADJ
1-4.
USB SERIAL No. INPUT
The set is shipped with a unique ID (USB Serial No.) written in it.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model name)
and SERIAL No. into the screen and write them.
This ID has not been written in a new board for service, and there-
fore it must be entered after the board replacement.
If original ID can be read from the board before replacement, read
it from the board before replacement using the “SERIAL READ/
WRITE” screen, and then write it after replacement.
If original ID cannot be read from the board before replacement,
write the ID for service using the “MANUAL WRITE” screen.
(The ID for service is different from the ID written when the set is
shipped.) Enter the PRODUCT ID (last 5 characters of model name)
and SERIAL No. into the screen and write them.
1.
Function of Each Button on USB Serial No. Input
Screen
Screen
Click the [USB SERIAL No. INPUT] button on the Main Menu screen,
and the “USB SERIAL No. INPUT” screen in Fig. 6-1-11 will
appear.
and the “USB SERIAL No. INPUT” screen in Fig. 6-1-11 will
appear.
Fig. 6-1-11
1
[To Menu] button
Return to the main menu.
Return to the main menu.
2
Display area
The “PRODUCT ID” and “SERIAL No.” are displayed.
The “PRODUCT ID” and “SERIAL No.” are displayed.
3
[Check Serial] button
The USB SERIAL No. data is read from the camcorder and
displayed in the display area.
The USB SERIAL No. data is read from the camcorder and
displayed in the display area.
4
[Read and Save] button
The USB SERIAL No. data is read from the camcorder and
saved in PC as a file.
Default file name is as follows:
The USB SERIAL No. data is read from the camcorder and
saved in PC as a file.
Default file name is as follows:
5
[Load and Write] button
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camcorder.
The USB SERIAL No. data is loaded from the file saved in
PC and written to the camcorder.
6
Input area
Enter “PRODUCT ID” and “SERIAL No.” when writing the
ID for service.
The “PRODUCT ID” is set from the last 5 characters of model
name if the model name is selected.
For the “SERIAL No.”, read it from the label on the camcorder
body and enter it.
Enter “PRODUCT ID” and “SERIAL No.” when writing the
ID for service.
The “PRODUCT ID” is set from the last 5 characters of model
name if the model name is selected.
For the “SERIAL No.”, read it from the label on the camcorder
body and enter it.
7
[Write Manually] button
The USB SERIAL No. data entered in the input area is written
to the camcorder.
The USB SERIAL No. data entered in the input area is written
to the camcorder.
HDR-CX12_SERIAL_xxxxxxxx_yyyymmdd.dat
Date
USB serial number
Data name
USB serial number
Data name
5
3
4
2
7
6
1
Click on the first or last page to see other HDR-CX11E / HDR-CX12 / HDR-CX12E (serv.man3) service manuals if exist.