DOWNLOAD Sony HDR-CX11E / HDR-CX12 / HDR-CX12E (serv.man3) Service Manual ↓ Size: 717.33 KB | Pages: 44 in PDF or view online for FREE

6-24

HDR-CX11E/CX12/CX12E_ADJ

6) After setting the picture frame, if the [End] button is clicked,

“4. Picture Frame Setting (All White Frame)” is executed. The
following messages are displayed in the order given below
during the execution. Then, set the picture frame in accordance
with the messages.

7) After the setting, if the [OK] button is clicked, the adjustment

items from “5. AWB Standard Data Input” to “8. AWB Check”
are executed. During the execution, the following messages
are displayed in the order given below. Place or remove the
filters on the lens in accordance with the messages.

8) Upon successful completion of the “8. AWB Check”, the fol-

lowing message is displayed. Then, change the chart in accor-
dance with the message.

9) If the [OK] button is clicked, the adjustment items “9. Color

Reproduction Adj. & Check (Indoor)” is executed.

10) After the checking of the Indoor mode, “10. Color Reproduc-

tion Check (Outdoor)” is executed. The following messages
are displayed in order given below. Place or remove the filters
on the lens in accordance with the messages.

11) Upon successful completion of the “10. Color Reproduction

Check (Outdoor)”, the following message is displayed. Then,
change the chart in accordance with the message.

12) After the setting, if the [OK] button is clicked, the following

message is displayed during the execution of “11. Picture Frame
Setting (Center Frame)”. Set the subject in accordance with
the message, and then check the size of clear chart shot on the
monitor screen.

6-25

HDR-CX11E/CX12/CX12E_ADJ

13) After the checking, if the [OK] button in the message window

is clicked, “12. MAX GAIN Adj.” is executed.

14) Upon successful completion of the “12. MAX GAIN Adj.”,

“13. Release of Data Setting during Camera Adj.” is executed.

15) Upon successful completion of all items of the CAMERA

Adjustment 5, the following message is displayed. Click the
[OK] button.

6-26

HDR-CX11E/CX12/CX12E_ADJ

Before performing the defect adjustment, make sure that
the lens temperature of the camcorder 33 ºC to 36 ºC.

[Preparation (Temperature Check)]
1) Click the [Preparation] button of the CAMERA Adjustment 6

to display the Preparation screen.

2) Click the [Temperature Check] button of the Preparation screen,

the following screen will appear.

[Checking method]
Click the [Start]  button of the Temperature Check, and the
camcorder will go in the Temperature Check mode and the tem-
perature check result will be displayed on the LCD screen. Per-
form the aging if the check result is NG (below 33 ºC). To exit the
Temperature Check mode, click the [Stop] button.

[Aging method]
Set the camcorder to the Movie mode, and place the LCD screen
in the “reverse-closed” state. (In this state, the temperature rises
more quickly than that in other states.)
Set the camcorder to the Temperature Check mode, and wait until
the LCD screen display changes from NG (grid pattern) to OK
(color bars).

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. White Defect Adj. (FD white point)
3. White Defect Adj.
4. Black Defect Adj.
5. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 6.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) If “1. Data Setting during Camera Adj.” completed success-

fully, and the items from “2. White Defect Adj. (FD white
point)” to “3. White Defect Adj.” will be executed.

4) If “3. White Defect Adj.” completed successfully, the follow-

ing message is displayed. Set the subject in accordance with
the message.

5) Click the [OK] button, and the “4. Black Defect Adj.” will be

executed.

6) Upon completion of “4. Black Defect Adj.”, “5. Release of

Data Setting during Camera Adj.” is executed.

7) Upon successful completion of all items of the CAMERA Ad-

justment 6, the following message is displayed. Click the [OK]
button.

6-27

HDR-CX11E/CX12/CX12E_ADJ

“CAMERA Adjustment 7” is available only once after the
power is turned on. If the adjustment is retried, turn off the
power and turn on again.

[Automatic Adjustment Program execution items and
sequence]
1. Data Setting during Camera Adj.
2. Strobe Light Level & White Balance Adj.
3. Release of Data Setting during Camera Adj.

[Adjusting method]
1) Click the [Start] button of the CAMERA Adjustment 7.
2) The Automatic Adjustment Program executes “1. Data Setting

during Camera Adj.”.

3) Upon successful completion of the “1. Data Setting during

Camera Adj.”, the following message is displayed. Set the sub-
ject in accordance with the message.
(For the Flash adjustment box, refer to “6. Preparing the Flash
Adjustment Box” (see page 6-6).)

4) Press the [OK] button, and the items “2. Strobe Light Level &

White Balance Adj.” will be executed.

5) Upon completion of “2. Strobe Light Level & White Balance

Adj.”, “3. Release of Data Setting during Camera Adj.” is ex-
ecuted

6) Upon successful completion of all items of the CAMERA Ad-

justment 7, the following message is displayed. Click the [OK]
button.