Sony DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) Service Manual ▷ View online
49
Advanced Recording Operations
Recording still images on a “Memory Stick” during tape recording
You cannot shoot images with the flash during the following operations:
– Tape Recording
– Shutter speed (1/30 or smaller) adjustment
– Tape Recording
– Shutter speed (1/30 or smaller) adjustment
The flash does not fire even if you select auto (no indicator) and
(auto red-eye
reduction) during the following operations:
– Spot light
– Shutter speed adjustment
– Sunset & moon of PROGRAM AE
– Landscape of PROGRAM AE
– Exposure
– Flexible Spot Meter
– Spot light
– Shutter speed adjustment
– Sunset & moon of PROGRAM AE
– Landscape of PROGRAM AE
– Exposure
– Flexible Spot Meter
When you use an external flash (optional) which does not have the auto red-eye
reduction
You cannot select the auto red-eye reduction.
reduction
You cannot select the auto red-eye reduction.
50
Recording still images on a “Memory Stick” during tape recording
Self-timer recording
You can record still images on a “Memory Stick” with the self-timer. You can also use
the Remote Commander for this operation.
the Remote Commander for this operation.
Before operation
•Insert a “Memory Stick” into your camcorder.
•Set PHOTO REC in
•Insert a “Memory Stick” into your camcorder.
•Set PHOTO REC in
to MEMORY in the menu settings.(The default setting is
MEMORY.)
(1) In the standby, press FN and select PAGE2.
(2) Press SELFTIMER.
(2) Press SELFTIMER.
The
(self-timer) indicator appears on the screen.
(3) Press PHOTO deeper.
The self-timer starts counting down from 10 with a beep. In the last two
seconds of the countdown, the beep gets faster, then the recording starts
automatically.
seconds of the countdown, the beep gets faster, then the recording starts
automatically.
To cancel the self-timer
Press SELFTIMER so that the
(self-timer) indicator disappears from the screen while
your camcorder is in the standby. You cannot stop the count down.
Note
The self-timer is automatically canceled when:
– The self-timer is finished.
– The POWER switch is set to OFF (CHG) or VCR.
The self-timer is automatically canceled when:
– The self-timer is finished.
– The POWER switch is set to OFF (CHG) or VCR.
Self-timer recording
You can operate the self-timer recording only during the recording standby.
You can operate the self-timer recording only during the recording standby.
3
PHOTO
1
FN
PHOTO
51
Advanced Recording Operations
You can record still images such as photographs on tapes.
You can record about 510 images in the SP mode and about 765 images in the LP mode
on a 60-minute tape.
You can record about 510 images in the SP mode and about 765 images in the LP mode
on a 60-minute tape.
(1) In the standby, set PHOTO REC in
to TAPE in the menu settings.
(2) Keep pressing PHOTO lightly until a still image appears.
The CAPTURE indicator appears. Recording does not start yet.
To change from the selected still image to another image, release PHOTO once
and press it lightly again.
To change from the selected still image to another image, release PHOTO once
and press it lightly again.
(3) Press PHOTO deeper.
The still image on the screen is recorded for about seven seconds. The sound
during those seven seconds is also recorded.
The still image is displayed on the screen until recording is completed.
during those seven seconds is also recorded.
The still image is displayed on the screen until recording is completed.
Recording images with the flash
For the details, see page 48.
Recording images with self-timer
(1) Set PHOTO REC in
to TAPE in the menu settings (p. 209).
(2) Follow steps 1 and 3 on page 50.
Recording still images on a tape
– Tape Photo recording
– Tape Photo recording
2
•••••••
3
CAPTURE
PHOTO
PHOTO
52
Recording still images on a tape – Tape Photo recording
Notes
•During tape photo recording, you cannot change the mode or setting.
•When recording a still image, do not shake your camcorder. If you do so, the image
•During tape photo recording, you cannot change the mode or setting.
•When recording a still image, do not shake your camcorder. If you do so, the image
may flutter.
•You cannot use PHOTO during the following operations: ( The
indicator flashes
on the screen.)
– Fader
– Digital effect
– Fader
– Digital effect
•When you record images with the flash, sound may not be recorded clearly.
If you record a moving subject with the tape photo recording
When you play back the still image on other equipment, the image may flutter. This is
not a malfunction.
When you play back the still image on other equipment, the image may flutter. This is
not a malfunction.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
Your camcorder immediately records the image that is on the screen when you press
the button.
To use the tape photo recording during the tape recording
You cannot check an image on the screen by pressing PHOTO lightly. Press PHOTO
deeper. The still image is then recorded for about seven seconds, and your camcorder
returns to the standby.
You cannot check an image on the screen by pressing PHOTO lightly. Press PHOTO
deeper. The still image is then recorded for about seven seconds, and your camcorder
returns to the standby.
To record clear still images with little unsteadiness
We recommend that you record on a “Memory Stick” using the Memory Photo
recording.
We recommend that you record on a “Memory Stick” using the Memory Photo
recording.
When you record images with the flash
The allowed shooting distance is shorter than when you record on a “Memory Stick” in
Memory Photo recording.
The allowed shooting distance is shorter than when you record on a “Memory Stick” in
Memory Photo recording.
When playing back images recorded with the flash on other equipment
These images may flicker.
These images may flicker.
Click on the first or last page to see other DCR-TRV940 / DCR-TRV940E / DCR-TRV950 / DCR-TRV950E (serv.man3) service manuals if exist.