Sony DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) Service Manual ▷ View online
109
“Memory Stick” Operations
The POWER switch should be set to
.
(1) Keep pressing PHOTO lightly and check the image. The green z indicator
stops flashing, then lights up. The brightness of the image and the focus are
adjusted, being targeted for the middle of the image, and are fixed. Recording
does not start yet.
adjusted, being targeted for the middle of the image, and are fixed. Recording
does not start yet.
(2) Press PHOTO deeply.
Recording is complete when the bar scroll indicator disappears.
The image displayed on the screen when you press PHOTO deeply is recorded
on the “Memory Stick.”
The image displayed on the screen when you press PHOTO deeply is recorded
on the “Memory Stick.”
[a]
Approximate number of images that can be recorded on the “Memory Stick” *
[b]
Number of the folder currently used for recording
* The indication of the number of recordable still images
Depending on the image quality setting and the complexity of the subject, the indication
of the remaining number of recordable still images may not change even after you
record an image.
When the remaining number is greater than 9999, the >9999 indicator appears on the
screen.
Depending on the image quality setting and the complexity of the subject, the indication
of the remaining number of recordable still images may not change even after you
record an image.
When the remaining number is greater than 9999, the >9999 indicator appears on the
screen.
Recording still images on a “Memory
Stick” – Memory Photo recording
Stick” – Memory Photo recording
1
/
8
FINE
1600
[a]
[b]
2
FINE
1600
1 0 1
1 0 1
PHOTO
PHOTO
VCR
MEMORY/
NETWORK
CAMERA
OFF(CHG)
POW
ER
POWER switch
110
You can record still images on a “Memory Stick” during tape recording or tape
recording standby
See page 46 for details.
recording standby
See page 46 for details.
When the POWER switch is set to MEMORY
The following functions do not work:
– Digital zoom
– Super NightShot
– Color Slow Shutter
– Wide mode
– Fader
– Picture effect
– Digital effect
– SPORTS of PROGRAM AE (The indicator flashes.)
– Title
– SteadyShot
The following functions do not work:
– Digital zoom
– Super NightShot
– Color Slow Shutter
– Wide mode
– Fader
– Picture effect
– Digital effect
– SPORTS of PROGRAM AE (The indicator flashes.)
– Title
– SteadyShot
While saving a still image data
You cannot turn off the power or press PHOTO.
You cannot turn off the power or press PHOTO.
When you press PHOTO on the Remote Commander
Your camcorder immediately records the image that is on the screen when you press
the button.
Your camcorder immediately records the image that is on the screen when you press
the button.
When you press PHOTO lightly in Step 1
The image momentarily flickers. This is not a malfunction.
The image momentarily flickers. This is not a malfunction.
Recording data
The recording data (date/time or various settings when recorded) is not displayed
during recording. However, it is recorded automatically onto the “Memory Stick.” To
display the recording data, press DATA CODE during playback. You can also use the
Remote Commander for this operation (p. 40).
The recording data (date/time or various settings when recorded) is not displayed
during recording. However, it is recorded automatically onto the “Memory Stick.” To
display the recording data, press DATA CODE during playback. You can also use the
Remote Commander for this operation (p. 40).
If you record still images when the POWER switch is set to MEMORY
The angle of view is slightly larger compared with the angle of view when the POWER
switch is set to CAMERA.
The angle of view is slightly larger compared with the angle of view when the POWER
switch is set to CAMERA.
Recording still images on a “Memory Stick”
– Memory Photo recording
– Memory Photo recording
111
“Memory Stick” Operations
Recording images continuously
You can record still images continuously. Before recording, select one of the three
modes described below in the menu settings.
modes described below in the menu settings.
NORMAL [a] (
)
Your camcorder shoots up to four still images in 1600
× 1200 size or 25 still images in
640
× 480 size at about 0.5 sec intervals.
HIGH SPEED [a] (
)
Your camcorder shoots up to 32 still images in 640
× 480 size at about 0.07 sec intervals.
EXP BRKTG [b] (
)
Your camcorder automatically shoots three images at about 0.5 sec intervals at different
exposures.
exposures.
The POWER switch should be set to
.
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU.
(3) Select STILL SET in
(2) Press MENU.
(3) Select STILL SET in
, then press EXEC.
(4) Select BURST, then press EXEC.
(5) Select a desired mode, then press EXEC.
(6) Press EXIT to make the menu display disappear.
(7) Press PHOTO deeply.
(6) Press EXIT to make the menu display disappear.
(7) Press PHOTO deeply.
Recording still images on a “Memory Stick”
– Memory Photo recording
– Memory Photo recording
[a]
[b]
EXIT
RET.
EXEC
STILL SET
BURST
QUALITY
IMAGESIZE
BURST
QUALITY
IMAGESIZE
MEM SET 1
R
r
OFF
NORMAL
HIGH SPEED
EXP BRKTG
NORMAL
HIGH SPEED
EXP BRKTG
112
The number of still images in continuous shooting
The number of still images you can shoot continuously varies depending on the image
size and the capacity of the “Memory Stick.”
The number of still images you can shoot continuously varies depending on the image
size and the capacity of the “Memory Stick.”
While recording images continuously
The flash does not work.
The flash does not work.
When shooting with the self-timer or the Remote Commander
Your camcorder automatically records up to the maximum number of still images.
Your camcorder automatically records up to the maximum number of still images.
When HIGH SPEED is selected
Flickering or changes in color may occur.
Flickering or changes in color may occur.
If remaining capacity on the “Memory Stick” is less than for three images
EXP BRKTG does not work. “
EXP BRKTG does not work. “
FULL” appears when you press PHOTO.
The effect of EXP BRKTG
The effect of EXP BRKTG may not be noticeable on the screen.
We recommend viewing images on the TV or the computer to check the effect.
The effect of EXP BRKTG may not be noticeable on the screen.
We recommend viewing images on the TV or the computer to check the effect.
When NORMAL or HIGH SPEED is selected
Recording continues up to the maximum number of still images while pressing PHOTO
deeply.
Recording continues up to the maximum number of still images while pressing PHOTO
deeply.
Recording still images on a “Memory Stick”
– Memory Photo recording
– Memory Photo recording
Click on the first or last page to see other DCR-TRV60 / DCR-TRV60E / DCR-TRV70 (serv.man3) service manuals if exist.