Sony DCR-TRV38 / DCR-TRV38E / DCR-TRV39 (serv.man3) Service Manual ▷ View online
93
Editing
Monitoring the new recorded sound
The POWER switch should be set to
.
Operate by touching the panel.
(1) Play back the tape on which you added audio.
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select AUDIO MIX in
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select AUDIO MIX in
, then press EXEC (p. 170).
(5) Press r/R to adjust the balance between the original sound (ST1) and the new
sound (ST2), then press EXEC.
About five minutes after you disconnect the power source or remove the
battery pack, the setting of AUDIO MIX returns to the original sound (ST1)
only. The default setting is original sound only.
About five minutes after you disconnect the power source or remove the
battery pack, the setting of AUDIO MIX returns to the original sound (ST1)
only. The default setting is original sound only.
Audio dubbing
VCR SET
H i F i SOUND
AUD I O M I X
A/V
AUD I O M I X
A/V
c
DV OUT ST1
ST2
EXIT
RET.
EXEC
R
r
94
5
6
VACATION
COLOR
RET.
POS
r
SIZE
TITLE
OK
OK
EXIT
POS
R
PRESET TITLE
HELLO!
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
EXIT
RET.
EXEC
R
r
One cassette can have up to about 20 titles, if one title consists of five characters.
However, if the Cassette Memory is full with date and cassette label data, one cassette
can have only up to about 11 titles with five characters each.
Cassette Memory capacity is as follows:
– Six date data (maximum)
– One cassette label (maximum)
However, if the Cassette Memory is full with date and cassette label data, one cassette
can have only up to about 11 titles with five characters each.
Cassette Memory capacity is as follows:
– Six date data (maximum)
– One cassette label (maximum)
The POWER switch should be set to
or
.
Operate by touching the panel.
(1) Insert the cassette with Cassette Memory.
(2) During standby, recording, playback or playback pause, press FN to display
(2) During standby, recording, playback or playback pause, press FN to display
PAGE1.
(3) Press MENU to display the menu.
(4) Select TITLE in
(4) Select TITLE in
, then press EXEC. (p. 173)
(5) Select
, then press EXEC.
(6) Select a desired title, then press EXEC. The title appears on the screen.
(7) If necessary, change the color, size, or position by pressing COLOR, SIZE,
(7) If necessary, change the color, size, or position by pressing COLOR, SIZE,
POS
r or POS R.
(8) Press TITLE OK.
(9) Press SAVE TITLE.
(9) Press SAVE TITLE.
During playback, playback pause or recording:
The TITLE SAVE indicator appears on the screen for about five seconds and
the title is set.
During recording standby:
The TITLE indicator appears. And when you press START/STOP to start
recording, the TITLE SAVE indicator appears on the screen for about five
seconds and the title is set.
The TITLE SAVE indicator appears on the screen for about five seconds and
the title is set.
During recording standby:
The TITLE indicator appears. And when you press START/STOP to start
recording, the TITLE SAVE indicator appears on the screen for about five
seconds and the title is set.
Superimposing a title on a cassette with
Cassette Memory
Cassette Memory
VACATION
95
Editing
To use the custom title
If you want to use the custom title, select
If you want to use the custom title, select
in step 5.
The titles superimposed with your camcorder
•They appear only by DV
•They appear only by DV
format video equipment with index titler function.
•The point you superimposed the title may be detected as an index signal when
searching a recording with other video equipment.
To not display title
Set TITLE DSPL to OFF in the menu settings (p. 173).
Set TITLE DSPL to OFF in the menu settings (p. 173).
Title setting
•The title color changes as follows:
•The title color changes as follows:
WHITE
t YELLOW t VIOLET t RED t CYAN t GREEN t BLUE
•The title size changes as follows:
SMALL
y LARGE
You cannot input 13 characters or more in LARGE size.
•The title position as follows:
If you select the title size SMALL, you have nine choices for the title position.
If you select the title size LARGE, you have eight choices for the title position.
If you select the title size LARGE, you have eight choices for the title position.
Erasing a title
The POWER switch should be set to
or
.
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select TITLEERASE in
(2) Press MENU to display the menu.
(3) Select TITLEERASE in
, then press EXEC (p. 173). The TITLE ERASE screen
appears.
(4) Select the title you want to erase, then press EXEC.
The ERASE OK? indicator appears.
(5) Make sure the title is the one you want to erase, then press OK.
The ERASING indicator flashes on the screen.
When the title is erased, the COMPLETE indicator appears.
When the title is erased, the COMPLETE indicator appears.
To return to FN
Press EXIT.
To cancel erasing
Press CANCEL in step 5.
3
4
T I TLE ERASE
1 HELLO !
2 CONGRATULAT I ONS !
3 HAPPY NEW YEAR !
4 PRESENT
5 GOOD MORN I NG
6 WEDD I NG
2 CONGRATULAT I ONS !
3 HAPPY NEW YEAR !
4 PRESENT
5 GOOD MORN I NG
6 WEDD I NG
T I TLE ERASE
4 PRESENT
END
EXEC
R
r
ERASE OK?
OK
CAN–
CEL
CEL
Superimposing a title on a cassette with Cassette Memory
96
You can make up to two titles and store them in the memory of your camcorder. Each
title can have up to 20 characters.
title can have up to 20 characters.
The POWER switch should be set to
or
.
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select TITLE in
(2) Press MENU to display the menu.
(3) Select TITLE in
, then press EXEC (p. 173).
(4) Select
, then press EXEC.
(5) Select CUSTOM1 SET or CUSTOM2 SET, then press EXEC.
(6) Select a desired character. Repeat pressing a key to select a desired character
(6) Select a desired character. Repeat pressing a key to select a desired character
on the key.
(7) Press c to move the cursor for the next character. Repeat the same procedure
as step 6 and 7 to complete your title.
(8) Press SET. The title is stored in memory.
To return to FN
Press EXIT.
To change a title you have stored
In step 5, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want
to change, then press EXEC and enter the new title as desired.
to change, then press EXEC and enter the new title as desired.
If you take five minutes or longer to enter characters during tape recording
standby with the cassette inserted in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then
start again from step 1.
We recommend setting the POWER switch to VCR or removing the cassette so that
your camcorder does not automatically turn off while you are entering title characters.
standby with the cassette inserted in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then
start again from step 1.
We recommend setting the POWER switch to VCR or removing the cassette so that
your camcorder does not automatically turn off while you are entering title characters.
To erase the character
Press
Press
C. The last character is erased.
To enter a space
Press
Press
c.
Making your own titles
4
5
7
TITLE SET
CUSTOM1 SET
CUSTOM2 SET
CUSTOM2 SET
EXIT
RET.
EXEC
R
r
&? !
ABC
DEF
T
t
678
90
123
45
MNO
JKL
GH I
SET
’ . ,
/
–
WXY
Z
TUV
PQR
S
[ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
EXIT
TITLE SET
&? !
ABC
DEF
T
t
678
90
123
45
MNO
JKL
GH I
SET
’ . ,
/
–
WXY
Z
TUV
PQR
S
[ PARTY_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
EXIT
TITLE SET
Click on the first or last page to see other DCR-TRV38 / DCR-TRV38E / DCR-TRV39 (serv.man3) service manuals if exist.