DOWNLOAD Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man3) Service Manual ↓ Size: 3.76 MB | Pages: 127 in PDF or view online for FREE

Model
DCR-TRV360 DCR-TRV361 DCR-TRV460 DCR-TRV460E DCR-TRV461E (serv.man3)
Pages
127
Size
3.76 MB
Type
PDF
Document
Service Manual
Brand
Device
Movie / LEVEL 1
File
dcr-trv360-dcr-trv361-dcr-trv460-dcr-trv460e-dcr-t.pdf
Date

Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man3) Service Manual ▷ View online

D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Rec
o
rdin
g
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Recording
25
b
Note
• While recording movies on a 
Memory Stick,
 the 
only menu items available will be those with short 
cuts on the Personal Menu. In order to use other 
menu items, add them to the Personal Menu.
z
Tip
• If you do not use your camcorder for a long time, 
remove the cassette and store it.
Indicators displayed during recording 
on a tape
The indicators will not be recorded on the tape.
Date/time and the camera settings data (p. 54) 
will not be displayed during recording.
Remaining battery
The indicated time may not be correct 
depending on the environment of use. 
When you opened or closed the LCD panel, 
it takes about 1 minute to display the correct 
remaining battery time.
Recording mode (SP or LP)
Format indicator
Recording status ([STBY] (standby) or 
[REC] (recording))
Time code or tape counter 
(hour: minute: second)
Recording capacity of the tape
Displayed after you run the tape for a while.
Personal Menu button (p. 59)
END SEARCH/EDIT SEARCH/Rec 
review display switch button (p. 44)
Indicators displayed during recording 
on a “Memory Stick”
The indicators will not be recorded on the 
“Memory Stick.”
Date/time (p. 54) will not be displayed during 
recording.
Recording folder
Remaining battery
The indicated time may not be correct 
depending on the environment of use. 
When you opened or closed the LCD panel, 
it takes about 1 minute to display the correct 
remaining battery time.
Recording status ([REC] (recording))
Movie size
Recorded time (hour: minute: second)
Recording capacity of the “Memory 
Stick”
“Memory Stick” recording start 
indicator (appears for about 5 seconds)
Personal Menu button (p. 59)
Review button (p. 24)
b
Notes
• Before changing the battery pack, slide the POWER 
switch up to (CHG) OFF.
• In the default setting, when you do not operate the 
camcorder for more than about 5 minutes, the power 
will automatically turn off to prevent battery loss 
([A.SHUT OFF], p. 81). To restart recording, slide 
the POWER switch down to select CAMERA-
TAPE or CAMERA-MEMORY, and then press 
REC START/STOP.
0:00:00
REC
P-MENU
60min
60min
REC
2min
0:00:00
320
P-MENU
101
,
continued
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Recording
26
z
Tips
• To ensure smooth transition on a tape from the last 
recorded scene to the next, note the following.
– Do not remove the cassette. (The picture will be 
recorded continuously without a break even when 
you turn the power off).
– Do not record pictures in SP mode and LP mode on 
the same tape.
– Avoid stopping then recording a movie in the LP 
mode.
• See “To record for a longer time on a “Memory 
Stick”” (p. 26) for the approximate length of time it 
is possible to record on a “Memory Stick” of 
different capacities.
• The recording time, date, and the camera settings data 
(for tape only) are recorded automatically on the 
recording media without being displayed on the screen. 
You can view this information during playback by 
selecting [DATA CODE] in the menu setting (p. 54).
Recording for a longer time
To record for a longer time on a tape
In the 
 (STANDARD SET) menu, select 
[
REC MODE], then [LP] (p. 76). 
In the LP mode, you can record 1.5 times longer 
than you can when recording in the SP mode. 
A tape recorded in the LP mode should be 
played back only on this camcorder.
To record for a longer time on a 
“Memory Stick”
In the 
 (MEMORY SET) menu, select 
[MOVIE SET], [
IMAGE SIZE], then [160 × 
112] (p. 65). 
The length of time you can record on a 
“Memory Stick” varies depending on the image 
size and the recording environment.
Refer to the following list for approximate 
length of time you can record movies on a 
“Memory Stick” formatted on your camcorder.
Image size and time (hour: minute: second) 
* Supplied with DCR-TRV361 only.
Using zoom
When the CAMERA-TAPE mode is 
selected, you can choose zoom to 
magnification levels greater than 20 times, 
and from that point activate the digital zoom 
([DIGITAL ZOOM], p. 63).
Occasional use of the zoom is effective, but 
use it sparingly for best results.
[320 × 240]
[160 × 112]
8MB*
00:01:20
00:05:20
16MB 00:02:40
00:10:40
32MB
00:05:20
00:21:20
64MB
00:10:40 00:42:40
128MB
00:21:20 01:25:20
256MB
 (MSX-256) 
00:42:40
02:50:40
512MB
 (MSX-512)
01:25:20
05:41:20
1GB 
(MSX-1G) 
02:50:40
11:22:40
1 cm (approx. 
1/2 inch)*
80 cm (approx. 
2 5/8 feet)*
* The minimum distance required between your 
camcorder and the subject to get a sharp focus in 
that position of the lever.
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Rec
o
rdin
g
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Recording
27
Move the power zoom lever slightly for a 
slower zoom. Move it further for a faster 
zoom.
To record wider range of view
Move the power zoom lever towards W.
The subject appears farther away (Wide 
angle).
To record closer view
Move the power zoom lever towards T.
The subject appears closer (Telephoto).
Using the built-in light
You can use the built-in light to suit your 
shooting situation. The recommended 
distance between the subject and camcorder 
is about 1.5 m (5 feet).
Press LIGHT repeatedly to select a setting.
The settings are displayed cyclically in the 
following order.
No indicator displayed: Always records 
without using the built-in light.
m
 : Automatically turns on and off 
according to the ambient brightness.
m
 : Always turns on.
To turn off the built-in light
Press LIGHT repeatedly until no indicator 
appears on the screen.
b
Notes
• The built-in video light emits very bright light, 
which is perfectly safe in normal use. However, 
avoid directly aiming the light at a subject’s eyes 
from very close range.
• The battery pack discharges quickly while the built-
in light is turned on.
• When you do not use your camcorder, turn the built-
in light off and remove the battery pack to avoid 
turning on the built-in light accidentally.
• When flickering occurs while shooting in the 
 mode, press LIGHT until 
 
appears.
• The built-in light may turn on/off when you use the 
[PROGRAM AE] or backlight function while 
shooting in the 
 mode.
• The built-in light is turned off in the following cases:
– While the END SEARCH function is working.
– Interval time of Interval recording.
– When you leave it on for more than 5 minutes with 
the POWER switch set to CAMERA-MEMORY.
– When it stays on in the 
 mode for more 
than 5 minutes.
– When you leave it on for more than 5 minutes with 
no cassette inserted or after the tape has run out.
• When you use the conversion lens (optional), light 
from the built-in light is blocked and may not 
illuminate the subject properly.
LIGHT 
Built-in light
,
continued
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Recording
28
Recording in mirror mode
You can turn the LCD panel towards the 
subject so that you and your subject can share 
the image being recorded. You can also 
utilize this function when recording yourself, 
to keep the attention of small children 
attracted to the camcorder while you record 
them.
Open the LCD panel 90 degrees to the 
camcorder, then rotate it 180 degrees 
towards the subject.
A mirror-image of the subject appears on the 
LCD screen, but the picture will be normal 
when recorded.
Using the self-timer
With the self-timer, you can start recording 
after a delay of about 10 seconds.
1
Touch .
2
Touch [SELF-TIMER].
If the item is not displayed on the screen, 
touch 
/
. If you cannot find it, touch 
[MENU], and select it from the 
 
(CAMERA SET) menu. 
3
Touch [ON], then 
.
 appears.
START/STOP 
REC START/STOP
SELF–TIMER:
OFF
ON
OFF
0:00:00
60min
STBY
0:00:00
STBY
P-MENU
60min
Page of 127
Display

Click on the first or last page to see other DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man3) service manuals if exist.