Sony DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man3) Service Manual ▷ View online
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Rec
o
rdin
g
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Recording
41
4
Touch the desired effect, then touch
.
When you touch [OVERLAP], [WIPE] and
[DOT FADER], the image on the tape in
your camcorder is stored as a still image.
(While storing the image, the screen turns to
blue.)
[DOT FADER], the image on the tape in
your camcorder is stored as a still image.
(While storing the image, the screen turns to
blue.)
5
Press REC START/STOP.
The fader indicator stops flashing and
disappears when the fade is complete.
disappears when the fade is complete.
To cancel the operation
Follow steps 2 and 3, then touch [OFF] in step 4.
b
Notes
• For DCR-TRV460:
The OVERLAP, WIPE and DOT FADER functions
do not work with tapes recorded on other devices in
the Hi8
do not work with tapes recorded on other devices in
the Hi8
/standard 8 mm
system.
• The title does not fade in or fade out. Erase it before
operating the FADER function if it is not needed.
• You cannot use the FADER function together with:
– Super NightShot plus function
– Color Slow Shutter function
– Digital effect
– [INTERVAL REC] (Interval recording)
– [FRAME REC] (Frame recording)
– Self-timer
– Color Slow Shutter function
– Digital effect
– [INTERVAL REC] (Interval recording)
– [FRAME REC] (Frame recording)
– Self-timer
Fading in from still image on the
“Memory Stick” – Memory overlap
“Memory Stick” – Memory overlap
You can fade in from the still image on the
“Memory Stick” to the movie currently being
recorded on the tape.
“Memory Stick” to the movie currently being
recorded on the tape.
1
Check that you have a “Memory Stick”
with the still image to be superimposed
and a tape in your camcorder.
with the still image to be superimposed
and a tape in your camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
CAMERA-TAPE mode.
3
Touch
.
4
Touch
[
MENU].
5
Select
(PICT. APPLI.), then
[
OVERLAP] by touching
/
and touch
.
The recorded image appears on the
thumbnail screen.
thumbnail screen.
6
Touch
(previous) /
(next) to
select the still image to be superimposed.
7
Touch [ON], then
.
8
Touch .
9
Press REC START/STOP to start
recording.
[M. OVRLAP] stops flashing, and
disappears when fading is finished.
recording.
[M. OVRLAP] stops flashing, and
disappears when fading is finished.
Using special effects
– Digital
effect
You can add digital effects to the recordings.
[STILL]
You can record a movie while superimposing it
on a previously recorded still image.
on a previously recorded still image.
[FLASH] (flash motion)
You can record a movie with a serial-still-image
effect (strobe effect).
effect (strobe effect).
[LUMI. KEY] (luminance key)
You can replace a brighter area in a previously
recorded still image, such as the background of
a person or a title written on white paper, with a
movie.
recorded still image, such as the background of
a person or a title written on white paper, with a
movie.
0:00:00
STBY
P-MENU
60min
FADER
BLACK
Still image
Movie
,
continued
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Recording
42
[TRAIL]
You can record a picture so that an incidental
image like a trail is left.
image like a trail is left.
[SLOW SHUTTR] (slow shutter)
You can slow down the shutter speed. This
mode is suitable for shooting a subject more
clearly in a dark place.
mode is suitable for shooting a subject more
clearly in a dark place.
[OLD MOVIE]
You can add an old movie-type atmosphere to
pictures. Your camcorder automatically records
pictures in the letterbox mode for all screen size,
sepia in color, and at a slower shutter speed.
pictures. Your camcorder automatically records
pictures in the letterbox mode for all screen size,
sepia in color, and at a slower shutter speed.
1
Slide the POWER switch to select the
CAMERA-TAPE mode.
CAMERA-TAPE mode.
2
Touch .
3
Touch [D.EFFECT].
If the item is not displayed on the screen,
touch
touch
/
. If you cannot find it, touch
[MENU], and select it from the
(PICT.
APPLI.) menu.
4
Touch the desired effect, then adjust
the effect by touching
the effect by touching
(decrease) /
(increase) and touch
.
When you touch [STILL] or [LUMI. KEY],
the image displayed on the screen at that
time is saved as a still image.
the image displayed on the screen at that
time is saved as a still image.
* It is hard to adjust the focus automatically when
you choose this effect. Adjust the focus
manually using a tripod to steady the
camcorder.
manually using a tripod to steady the
camcorder.
5
Touch .
appears.
To cancel Digital effect
Follow steps 2 and 3, then select [OFF] in step
4.
4.
b
Notes
• You cannot use Digital effect together with:
– Super NightShot plus function
– Color Slow Shutter function
– FADER function
– Memory overlap
– MEMORY MIX function
– Color Slow Shutter function
– FADER function
– Memory overlap
– MEMORY MIX function
• You cannot use [SLOW SHUTTR]/[OLD MOVIE]
together with [PROGRAM AE] (except [AUTO]).
• You cannot use [OLD MOVIE] together with:
– [16:9 WIDE] mode
– Picture effect ([PICT. EFFECT])
– Picture effect ([PICT. EFFECT])
z
Tip
• You can create a picture with color and brightness
reversed or a picture that looks like a pastel drawing
while recording on a tape. For details, refer to the
Picture effect ([PICT. EFFECT], p. 68).
while recording on a tape. For details, refer to the
Picture effect ([PICT. EFFECT], p. 68).
D. EFFECT:
OFF
OFF
STILL
1/2
0:00:00
FLASH
LUMI.
KEY
60min
STBY
OK
0:00:00
D. EFFECT:
STILL
60min
STBY
Adjustment screen example:
Effect
Items to adjust
[STILL]
The degree of transparency
of the still image you want
to superimpose on a
movie.
of the still image you want
to superimpose on a
movie.
[FLASH]
The interval of frame-by-
frame playback.
frame playback.
[LUMI. KEY]
The color scheme of the
area in the still image
which is to be swapped
with a movie.
area in the still image
which is to be swapped
with a movie.
[TRAIL]
The fade time of the
incidental image.
incidental image.
[SLOW
SHUTTR]*
SHUTTR]*
Shutter speed (1 is 1/30, 2
is 1/15, 3 is 1/8, 4 is 1/4).
is 1/15, 3 is 1/8, 4 is 1/4).
[OLD MOVIE]
No adjustment necessary.
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Rec
o
rdin
g
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
Recording
43
Overlaying still images on movies
on a tape – MEMORY MIX
on a tape – MEMORY MIX
You can superimpose a still image you have
recorded on a “Memory Stick” over the
movie you are currently recording on a tape.
You can then record the superimposed
pictures on a tape or a “Memory Stick.” (You
cannot superimpose a still image on a tape
which you have already finished recording.)
recorded on a “Memory Stick” over the
movie you are currently recording on a tape.
You can then record the superimposed
pictures on a tape or a “Memory Stick.” (You
cannot superimpose a still image on a tape
which you have already finished recording.)
[M
T
CAM LUMI.] (Memory Luminance
key)
You can swap the brighter (white) area of a still
image into a movie. To use this function, have a
still image of an illustration or title handwritten
on white paper recorded on a “Memory Stick”
beforehand.
image into a movie. To use this function, have a
still image of an illustration or title handwritten
on white paper recorded on a “Memory Stick”
beforehand.
[CAM
T
M CHROMA] (Camera Chroma
key)
You can superimpose a movie on top of a still
image, such as an image which can be used as
background. Shoot the movie with the subject
against a blue background. Only the blue area of
the movie will be swapped with the still image.
image, such as an image which can be used as
background. Shoot the movie with the subject
against a blue background. Only the blue area of
the movie will be swapped with the still image.
[M
T
CAM CHROMA] (Memory Chroma
key)
You can have the movie swap into the blue area
of a still image such as an illustration or into a
frame with a blue area enclosed by the frame.
of a still image such as an illustration or into a
frame with a blue area enclosed by the frame.
1
Check that you have a “Memory
Stick” with the still image to be
superimposed and a tape (only if you
are recording on tape) in your
camcorder.
Stick” with the still image to be
superimposed and a tape (only if you
are recording on tape) in your
camcorder.
2
Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode
(when you are recording on a tape) or
the CAMERA-MEMORY mode
(when you are recording on a
“Memory Stick”).
select the CAMERA-TAPE mode
(when you are recording on a tape) or
the CAMERA-MEMORY mode
(when you are recording on a
“Memory Stick”).
3
Touch .
4
Touch [MEMORY MIX].
If the item is not displayed on the screen,
touch
touch
/
. If you cannot find it, touch
[MENU], and select it from the
(PICT.
APPLI.) menu.
The still image stored in the “Memory
Stick” will be displayed on the thumbnail
screen.
The still image stored in the “Memory
Stick” will be displayed on the thumbnail
screen.
5
Touch
/
to select the still
image to overlap.
6
Touch the desired effect.
The still image is superimposed on the
movie which is currently displayed on the
LCD screen.
movie which is currently displayed on the
LCD screen.
Still image
Movie
Still image
Blue
Movie
Still image
Movie
Blue
OFF
M CAM
CHROMA
M CAM
L U M I .
L U M I .
CAM M
CHROMA
101
OK
MEMORY MIX:
OFF
0:00:00
60min
STBY
101–0001
Thumbnail screen
101
OK
MEMORY MIX:
CAM M CHROMA
101–0001
0:00:00
60min
STBY
,
continued
DCR-TRV360/TRV361/TRV460
3-087-921-11(1)
D:\##SAGYO\DTP-shanhai-agari\824719S DCRTRV360-US\824719S DCR-TRV360_US\824719S DCR-
TRV360_US\3087921111 DCR-TRV360\01GB04REC.fm
master:Right
Recording
44
7
Touch
(decrease)/
(increase)
to adjust the following.
For [M
T
CAM LUMI.]
The color scheme of the bright area in the
still image which is to be swapped into a
movie. When you want to record only the
still image stored on the “Memory Stick” to
a tape, touch
still image which is to be swapped into a
movie. When you want to record only the
still image stored on the “Memory Stick” to
a tape, touch
on the screen in
[M
TCAM LUMI.] until the bar indicator
is extended fully to the right side.
For [CAM
T
M CHROMA]
The color scheme of the blue area in the
movie.
movie.
For [M
T
CAM CHROMA]
The color scheme of the blue area in the still
image which is to be swapped into a movie.
image which is to be swapped into a movie.
8
Touch
twice.
appears.
9
Start recording.
When you are recording on a tape
Press REC START/STOP.
When you are recording on a
“Memory Stick”
“Memory Stick”
Press PHOTO fully.
To cancel MEMORY MIX
Follow steps 1 to 4, then touch [OFF] in step 5.
b
Notes
• When the overlapping still image has a large amount
of white, the image in the thumbnail screen may not
be clear.
be clear.
• When you use the MEMORY MIX function in the
mirror mode (p. 28), the picture on the LCD screen
appears normally, without being mirror-reversed.
appears normally, without being mirror-reversed.
• You may not be able to play back pictures modified
on your computer or recorded with other camcorders
on your camcorder.
on your camcorder.
z
Tip
• The supplied SPVD-012 USB Driver CD-ROM
contains sample images for use in MEMORY MIX
operations. Refer to the supplied “Computer
Applications Guide” for details.
operations. Refer to the supplied “Computer
Applications Guide” for details.
Searching for the
starting point
starting point
Searching for the last scene of the
most recent recording
– END SEARCH
most recent recording
– END SEARCH
This function is handy when you have played
back the tape, for example, but want to start
recording right after the most recently
recorded scene. The END SEARCH function
will not work once you eject the cassette after
you have recorded on the tape.
back the tape, for example, but want to start
recording right after the most recently
recorded scene. The END SEARCH function
will not work once you eject the cassette after
you have recorded on the tape.
1
Slide the POWER switch repeatedly to
select the CAMERA-TAPE mode.
select the CAMERA-TAPE mode.
2
Touch .
3
Touch .
The last scene of the most recent recording
is played back for about 5 seconds, and the
camcorder enters the standby mode at the
point where the last recording has finished.
is played back for about 5 seconds, and the
camcorder enters the standby mode at the
point where the last recording has finished.
POWER switch
0:00:00
STBY
60min
EDIT
Click on the first or last page to see other DCR-TRV360 / DCR-TRV361 / DCR-TRV460 / DCR-TRV460E / DCR-TRV461E (serv.man3) service manuals if exist.