Sony DCR-TRV24E / DCR-TRV25E / DCR-TRV27E (serv.man2) Service Manual ▷ View online
2-16
DCR-TRV24E/TRV25E/TRV27E
VA-117
VC-281
[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Connection to Check the Camera Section
To check the CAMERA section, set the CAMERA to the “Forced camera power ON” mode.
When you want to operate the ZOOM and FOCUS, use the controls on the remote commander (with HOLD switch off).
When you want to operate the ZOOM and FOCUS, use the controls on the remote commander (with HOLD switch off).
Setting the “Forced Camera Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 01, and
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 01, and
press the PAUSE button of the adjustment remote
commander.
commander.
Exiting the “Forced Camera Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
2) Select page: 0, address: 10, and set data: 00.
3) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
4) Select page: 0, address: 01, and set data: 00.
JK-218 board
JK-217 board
VC-281 board
VA-117 board
Adjustment remote
commander (RM-95)
commander (RM-95)
Flexible board
(From the Lens block assembly)
(27P)
(From the Lens block assembly)
(27P)
Lens block
assembly
assembly
AC power
adaptor
adaptor
AC IN
Battery terminal board
(6P)
(6P)
Mechanism deck
FP-440 flexible board
(24P)
(24P)
Extension cable (100P)
(J-6082-352-A)
(J-6082-352-A)
2-17
DCR-TRV24E/TRV25E/TRV27E
2-18.CK-108 BOARD
< STEP 1 >
CK-108
2
Two tapping screws
(M1.7
×
3.5)
5
Control switch block
(SH-CX2670)(18P)
6
Control switch block
(KP-CX2670)(8P)
4
Tripod (Large)
3
Bottom frame
1
Three screws
(M1.7
×
4),
lock ace, p2
CK-108
4
Two tapping screws
(M1.7
×
3.5)
7
Tapping screw
(M1.7
×
3.5)
5
Speaker retainer
assembly
6
Speaker
(2.0cm)
3
Speaker (2P)
8
Harness
(PV-139)(8P)
2
Harness
(PV-139)(20P)
1
P harness retainer
P harness
retainer
retainer
Attach the
1
P harness retainer
so that the harness does not
come out as shown.
come out as shown.
9
CK-108 board
Caution
< STEP 2 >
2-18
DCR-TRV24E/TRV25E/TRV27E
2-19.HINGE ASSEMBLY
(Before starting disassembling, remove the LCD unit referring to section 2-1)
2
1
Four screws
(M1.7
×
4),
lock ace, p2
1
Two claws
3
Hinge cover (rear)
2
Hinge cover (front)
7
Hinge assembly
5
FP-442 flexible board
4
Screw
(M1.7
×
2.5), p
6
Harness (PV-139)(8, 20P)
2-19
DCR-TRV24E/TRV25E/TRV27E
2-20.CONTROL SWITCH BLOCK (PS-CX2670)
< STEP 1 >
< STEP 2 >
4
Zoom cover
2
Grip cover
1
Two screws
(M1.7
×
2.5), p
3
Two tapping screws
(M1.7
×
5)
5
CS frame assembly
1
Tapping screw
(M1.7
×
5)
2
Two tapping screws
(M1.7
×
3.5)
3
Tapping screw
(M1.7
×
5)
4
Tapping screw
(M1.7
×
3.5)
Click on the first or last page to see other DCR-TRV24E / DCR-TRV25E / DCR-TRV27E (serv.man2) service manuals if exist.