Sony DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man3) Service Manual ▷ View online
101
Editing
5
6
VACATION
COLOR
RET.
POS
r
SIZE
TITLE
OK
OK
EXIT
POS
R
PRESET TITLE
HELLO!
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
HAPPY BIRTHDAY
HAPPY HOLIDAYS
CONGRATULATIONS!
OUR SWEET BABY
WEDDING
VACATION
THE END
EXIT
RET.
EXEC
A cassette can have up to about 20 titles, if a title consists of 5 characters.
However, if the Cassette Memory is full with date, photo data (DCR-TRV19 only) and
cassette label data, the cassette can have only up to about 11 titles with 5 characters
each.
Cassette Memory capacity is as follows:
– 6 date data (maximum)
– 1 cassette label (maximum)
– 12 photo data (maximum) (DCR-TRV19 only)
However, if the Cassette Memory is full with date, photo data (DCR-TRV19 only) and
cassette label data, the cassette can have only up to about 11 titles with 5 characters
each.
Cassette Memory capacity is as follows:
– 6 date data (maximum)
– 1 cassette label (maximum)
– 12 photo data (maximum) (DCR-TRV19 only)
The POWER switch should be set to
or
.
Operate by touching the panel.
(1) Insert the cassette with Cassette Memory.
(2) During standby, recording, playback or playback pause, press FN to display
(2) During standby, recording, playback or playback pause, press FN to display
PAGE1.
(3) Press MENU to display the menu.
(4) Select TITLE in
(4) Select TITLE in
, then press EXEC (p. 181).
(5) Select
, then press EXEC.
(6) Select a desired title, then press EXEC. The title appears on the screen.
(7) If necessary, change the color, size, or position by pressing COLOR, SIZE,
(7) If necessary, change the color, size, or position by pressing COLOR, SIZE,
POS
r or POS R.
(8) Press TITLE OK.
(9) Press SAVE TITLE.
(9) Press SAVE TITLE.
During playback, playback pause or recording:
The TITLE SAVE indicator appears on the screen for about 5 seconds and the
title is set.
During recording standby:
The TITLE indicator appears. And when you press START/STOP to start
recording, the TITLE SAVE indicator appears on the screen for about 5 seconds
and the title is set.
The TITLE SAVE indicator appears on the screen for about 5 seconds and the
title is set.
During recording standby:
The TITLE indicator appears. And when you press START/STOP to start
recording, the TITLE SAVE indicator appears on the screen for about 5 seconds
and the title is set.
Superimposing a title on a cassette with
Cassette Memory
Cassette Memory
VACATION
102
3
4
T I TLE ERASE
1 HELLO !
2 CONGRATULAT I ONS !
3 HAPPY NEW YEAR !
4 PRESENT
5 GOOD MORN I NG
6 WEDD I NG
2 CONGRATULAT I ONS !
3 HAPPY NEW YEAR !
4 PRESENT
5 GOOD MORN I NG
6 WEDD I NG
END
EXEC
R
r
T I TLE ERASE
4 PRESENT
ERASE OK?
OK
CAN–
CEL
CEL
Superimposing a title on a cassette with Cassette Memory
To use the custom title
If you want to use the custom title, select
If you want to use the custom title, select
in step 5.
The titles superimposed with your camcorder
•They appear only by DV
•They appear only by DV
format video equipment with index titler function.
•The point you superimposed the title may be detected as an index signal when
searching a recording with other video equipment.
To not display title
Set TITLE DSPL in
Set TITLE DSPL in
to OFF in the menu settings (p. 181).
Title setting
•The title color changes as follows:
•The title color changes as follows:
WHITE
t YELLOW t VIOLET t RED t CYAN t GREEN t BLUE
•The title size changes as follows:
SMALL
y LARGE
You cannot input 13 characters or more in LARGE size.
•The title position:
If you select the title size SMALL, you have 9 choices for the title position.
If you select the title size LARGE, you have 8 choices for the title position.
If you select the title size LARGE, you have 8 choices for the title position.
Erasing a title
The POWER switch should be set to
or
.
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select TITLEERASE in
(2) Press MENU to display the menu.
(3) Select TITLEERASE in
, then press EXEC (p. 181). The TITLE ERASE screen
appears.
(4) Select the title you want to erase, then press EXEC.
The ERASE OK? indicator appears.
(5) Make sure the title is the one you want to erase, then press OK.
The ERASING indicator flashes on the screen.
When the title is erased, the COMPLETE indicator appears.
When the title is erased, the COMPLETE indicator appears.
To return to FN
Press EXIT.
To cancel erasing
Press CANCEL in step 5.
103
Editing
You can make up to 2 titles and store them in the memory of your camcorder. Each title
can have up to 20 characters.
can have up to 20 characters.
The POWER switch should be set to
or
.
Operate by touching the panel.
(1) Press FN to display PAGE1.
(2) Press MENU to display the menu.
(3) Select TITLE in
(2) Press MENU to display the menu.
(3) Select TITLE in
, then press EXEC (p. 181).
(4) Select
, then press EXEC.
(5) Select CUSTOM1 SET or CUSTOM2 SET, then press EXEC.
(6) Select a desired character. Repeat pressing a key to select a desired character
(6) Select a desired character. Repeat pressing a key to select a desired character
on the key.
(7) Press c to move the cursor to select the next character. Repeat the same
procedure as steps 6 and 7 to complete your title.
(8) Press SET. The title is stored in memory.
To return to FN
Press EXIT.
To change a title you have stored
In step 5, select CUSTOM1 SET or CUSTOM2 SET, depending on which title you want
to change, then press EXEC and enter the new title.
to change, then press EXEC and enter the new title.
If you take 5 minutes or longer to enter characters during tape recording standby
with the cassette inserted in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then
start again from step 1.
We recommend setting the POWER switch to VCR or removing the cassette so that
your camcorder does not automatically turn off while you are entering title characters.
with the cassette inserted in your camcorder
The power automatically goes off. The characters you have entered remain stored in
memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then
start again from step 1.
We recommend setting the POWER switch to VCR or removing the cassette so that
your camcorder does not automatically turn off while you are entering title characters.
To erase the character
Press
Press
C. The last character is erased.
To enter a space
Press
Press
c.
Making your own titles
4
5
7
&? !
ABC
DEF
T
t
678
90
123
45
MNO
JKL
GH I
SET
’ . ,
/
–
WXY
Z
TUV
PQR
S
[ PARTY_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
EXIT
TITLE SET
TITLE SET
CUSTOM1 SET
CUSTOM2 SET
CUSTOM2 SET
EXIT
RET.
EXEC
R
r
&? !
ABC
DEF
T
t
678
90
123
45
MNO
JKL
GH I
SET
’ . ,
/
–
WXY
Z
TUV
PQR
S
[ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ]
EXIT
TITLE SET
104
The label can consist of up to 10 characters and is stored in Cassette Memory. When you
insert the labeled cassette and set the POWER switch to CAMERA or VCR, the label is
displayed for about 5 seconds.
insert the labeled cassette and set the POWER switch to CAMERA or VCR, the label is
displayed for about 5 seconds.
The POWER switch should be set to
or
.
Operate by touching the panel.
(1) Insert the cassette with Cassette Memory you want to label.
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select TAPE TITLE in
(2) Press FN to display PAGE1.
(3) Press MENU to display the menu.
(4) Select TAPE TITLE in
, then press EXEC (p. 181).
(5) Select a desired character. Repeat pressing a key to select a desired character
on the key.
(6) Press c to move the cursor to select the next character. Repeat the same
procedure as steps 5 and 6 to complete the label.
(7) Press SET. The label is stored in memory.
To return to FN
Press EXIT.
To erase the label you have made
Erase the label by selecting
C in step 5, then press SET.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you have superimposed titles in the cassette
When the label appears, up to 4 titles also appear.
When the label appears, up to 4 titles also appear.
To erase the character
Press
Press
C. The last character is erased.
To enter a space
Press
Press
c.
Labeling a cassette on a cassette with
Cassette Memory
Cassette Memory
4
5
6
&? !
ABC
DEF
T
t
678
90
123
45
MNO
JKL
GH I
SET
’ . ,
/
–
WXY
Z
TUV
PQR
S
[ G_ _ _ _ _ _ _ _ _ ]
EXIT
TAPE TITLE
&? !
ABC
DEF
T
t
678
90
123
45
MNO
JKL
GH I
SET
’ . ,
/
–
WXY
Z
TUV
PQR
S
[ GRADU_ _ _ _ _ ]
EXIT
TAPE TITLE
&? !
ABC
DEF
T
t
678
90
123
45
MNO
JKL
GH I
SET
’ . ,
/
–
WXY
Z
TUV
PQR
S
[ _ _ _ _ _ _ _ _ _ _ ]
EXIT
TAPE TITLE
Click on the first or last page to see other DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man3) service manuals if exist.