Sony DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man2) Service Manual ▷ View online
2-9
DCR-TRV12E/TRV14E/TRV19/TRV19E
2-8. PD-188 BOARD, LCD UNIT
PD-188
PD-188
2
Two screws
(M1.7
×
4),
lock ace, p2
3
Four claws
4
P cabinet (C)
assembly (M)
5
Harness (PV-140)
(20P, 40P)
1
Tapping screw
(M1.7
×
5)
When remove the Harness (PV-140),
be careful to damage the Harness (PV-140).
be careful to damage the Harness (PV-140).
8
LCD insulating sheet (40)
qg
Back light
qh
Panel frame (40)
qj
PD-188 board
6
Screw
(M1.7
×
2.5),
lock ace, p2
q;
Dowel
qa
Two claws
qs
Liquid crystal
indicator module
(24P, 6P)
(24P, 6P)
qd
Liquid crystal
indicator module
7
P cabinet (M) (40) assembly
9
LCD cushion (T)
qf
Back light (10P)
Caution
2-10
DCR-TRV12E/TRV14E/TRV19/TRV19E
2-9. HINGE (40) ASSEMBLY
A
2
3
3
5
Hinge cover (C) (40)
Hinge (40) assembly
9
Harness (PV-140)
7
Hinge cover (M) (40)
0
Hinge (40) assembly
Remove the Harness (PV-140) in the direction
of the arrow
of the arrow
Bend the Harness (PV-140) along with connector
8
Remove the FP-626 flexible board
that is attached by the doble-sided tape
4
Three claws
Dowel for setting
the position
the position
6
Screw
(M1.7
×
4),
lock ace, p2
B
1
Screw
(M1.7
×
4),
lock ace, p2
2
Rotate to the "A" marked portion
counterclockwise by 90 degrees
3
Rotate the "B" marked portion
counterclockwise by 90 degrees
in the direction of the arrow
in the direction of the arrow
Rotation of the LCD panel has limitation due to its hinge
in this model. Excessive force to rotate the LCD panel
damages the hinge.
(Refer to "Caution"of 2.1 Pcabinet assembly.)
in this model. Excessive force to rotate the LCD panel
damages the hinge.
(Refer to "Caution"of 2.1 Pcabinet assembly.)
Caution
If the FP-626 flexible board is removed once, the
adhesion strength of a double-sided tape decreases.
Use the new FP-626 flexible board at the time of an
assembly.
adhesion strength of a double-sided tape decreases.
Use the new FP-626 flexible board at the time of an
assembly.
Caution
2-11
DCR-TRV12E/TRV14E/TRV19/TRV19E
2-10. BT PANEL/EVF SECTION
2
Two screws
(M1.7
×
4),
lock ace, p2
1
Screw
(M1.7
×
4),
lock ace, p2
3
Battery terminal board
(3P)
5
BT panel/EVF section
4
FP-619 flexible board
(20P)
2-12
DCR-TRV12E/TRV14E/TRV19/TRV19E
2-11. LB-085 BOARD (REMOVING OF THE EVF)-1
q;
Eye cup (40)
assembly
3
Two s
crews
(M1.7
×
2.5),
lock ace, p2
5
Three s
crews
(M1.7
×
4),
lock ace, p2
9
S
crew
(M1.7
×
2.5),
lock ace, p2
8
S
crew
(M1.7
×
2.5),
lock ace, p2
7
VF tilt cabinet
4
S
crew
(M1.7
×
2.5),
lock ace, p2
6
VF hinge
assembly
1
EVF flexible
retainer
EVF flexible
retainer
retainer
Finder
FP-619 flexible board
When installing, pass the FP-619 flexible
board through the hole of the VF hinge assembly
as shown in the illustration.
board through the hole of the VF hinge assembly
as shown in the illustration.
FP-619 flexible board
FP-619 flexible board
VF hinge assembly
When installing the EVF flexible retainer,
please be sure to install it while the viewfinder
is kept pushed up to attach.
please be sure to install it while the viewfinder
is kept pushed up to attach.
Caution
Caution
2
Raise the Finder in the
direction of the arrow
When installing the EVF flexible retainer, fold
the FP-619 flexible board as shown in the
illustration.
the FP-619 flexible board as shown in the
illustration.
Click on the first or last page to see other DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man2) service manuals if exist.