Sony DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man2) Service Manual ▷ View online
2-1
SECTION 2
DISASSEMBLY
DCR-TRV12E/TRV14E/TRV19/TRV19E
COVER
COVER
HELP
HELP
The following flow chart shows the disassembly procedure.
1
2-2. CABINET (R) COVER (39E) ASSEMBLY ........
2
2-3. F PANEL SECTION ........................................
3
2-5.
CABINET (R) SECTION ...................................
4
2-10. BT PANEL/EVF SECTION ...........................
5
2-14. VA-118 BOARD, LENS SECTION ................
6
2-16. MECHANISM DECK, VC-311 BOARD (1) ....
7
2-17. MECHANISM DECK, VC-311 BOARD (2) ....
(page 2-4)
(page 2-5)
(page 2-7)
(page 2-11)
(page 2-15)
(page 2-16)
(page 2-17)
PROCEDURE OF REMOVING MECHANISM DECK
PD-188 board
service position
service position
SERVICE POSITION TO
CHECK THE VTR SECTION
CHECK THE VTR SECTION
DISASSEMBLY
DISASSEMBLY
DISASSEMBLY
DISASSEMBLY
DISASSEMBLY
HELP
DISASSEMBLY
HELP
DISASSEMBLY
HELP
DISASSEMBLY
HELP
DISASSEMBLY
HELP
2-2
DCR-TRV12E/TRV14E/TRV19/TRV19E
NOTE: Follow the disassembly procedure in the numerical order given.
Adjustment remote
commander (RM-95)
commander (RM-95)
AC power
adaptor
adaptor
AC IN
CPC-7 jig
(J-6082-382-A)
(J-6082-382-A)
Screw
(M1.7
(M1.7
×
4),
lock ace, p2
CPC lid
LANC jack
DC-IN connector
[CONNECTION OF EQUIPMENT]
2-3
DCR-TRV12E/TRV14E/TRV19/TRV19E
2-1. P CABINET (C) ASSEMBLY
PD-188
PD-188
[PD-188 BOARD SERVICE POSITION]
Adjustment remote
commander (RM-95)
commander (RM-95)
AC power
adaptor
adaptor
AC IN
CPC-7 jig
(J-6082-382-A)
(J-6082-382-A)
PD-188 board
8
P cabinet (C) assembly
3
Screw
(M1.7
×
4),
lock ace, p2
5
Screw
(M1.7
×
4),
lock ace, p2
6
Two tapping screws
(M1.7
×
5)
2
Turn the LCD panel
4
Turn the
LCD panel
1
Open the
LCD panel
7
Four claws
Opening and closing of LCD panel must be performed
only in the state that the LCD panel is completely in
parallel (perpendicular) with the main body of the
recorder.
only in the state that the LCD panel is completely in
parallel (perpendicular) with the main body of the
recorder.
When you want to rotate the LCD panel, rotate it after
the LCD panel is opened in its fully opened position.
the LCD panel is opened in its fully opened position.
Rotation of the LCD panel has limitation due to its
hinge in this model. Excessive force to rotate the
LCD panel damages the hinge. Follow the precaution
below.
hinge in this model. Excessive force to rotate the
LCD panel damages the hinge. Follow the precaution
below.
Caution
2-4
DCR-TRV12E/TRV14E/TRV19/TRV19E
2-2. CABINET (R) COVER (39E) ASSEMBLY
9
Remove the
projected part
8
Remove the
projected part
7
Close the LCD panel
q;
Push the Cabinet R cover (39E)
in the direction of the arrow to
remove the three claws.
remove the three claws.
qa
Pull out the Cabinet R cover (39E)
from the main body.
Claws
6
Screw
(M1.7
×
3),
lock ace, p2
4
Two screws
(M1.7
×
3),
lock ace, p2
1
Two screws
(M1.7
×
6),
lock ace, p2
3
Open the LCD panel
The projected
portion
portion
The chassis
The cabinet L side
5
Raise the Finder in the
direction of the arrow
Insert the projected portion of the Cabinet R cover (40E)
assembly into the cabinet L side of the the chassis.
assembly into the cabinet L side of the the chassis.
Caution
Caution
2
Screw
(M1.7
×
3),
lock ace, p2
A
When remove the Cabinet R cover
(39E) to the main body, remove the
Cabinet R cover (39E) while raising,
so that
(39E) to the main body, remove the
Cabinet R cover (39E) while raising,
so that
A
marked portion must not
be damaged.
Click on the first or last page to see other DCR-TRV12E / DCR-TRV14E / DCR-TRV19 / DCR-TRV19E (serv.man2) service manuals if exist.