DOWNLOAD Sony DCR-TR7000 / DCR-TR7000E / DCR-TR7100E / DCR-TRV103 / DCR-TRV110 / DCR-TRV110E / DCR-TRV110P / DCR-TRV203 / DCR-TRV210 / DCR-TRV210E / DCR-TRV310 / DCR-TRV310E / DCR-TRV310P / DCR-TRV315 Service Manual ↓ Size: 40.54 MB | Pages: 127 in PDF or view online for FREE

5-4

J-1

J-2

J-6

J-3

J-7

J-8

J-4

J-5

Fig. 5-1-1.

J-9

J-10

J-11

J-12

J-13

J-1

J-2

J-3

J-4

J-5

J-6

J-7

J-8

J-9

J-10

J-11

J-12

J-13

J-14

J-15

Filter for color temperature correction (C14)

ND filter 1.0

ND filter 0.3

Pattern box PTB-450

Color chart for pattern box

Adjustment remote commander (RM-95 upgraded).
(Note 1)

Siemens star chart

Clear chart for pattern box

Multi CPC jig

CPC-13 jig

Power cord (Note 2)

Extension cable (16P, 0.5mm)

Extension cable (70P, 0.5mm)

IR receiver jig

Mini pattern box

Camera table

J-6080-058-A

J-6080-808-A

J-6080-818-A

J-6082-200-A

J-6020-250-A

J-6082-053-B

J-6080-875-A

J-6080-621-A

J-6082-311-A

J-6082-443-A

J-6082-223-A

J-6082-357-A

J-6082-439-A

J-6082-383-A

J-6082-353-B

J-6082-384-A

Auto white balance adjustment/check
White balance adjustment/check

White balance check

White balance check

For checking the flange back

For adjusting the LCD block

For adjusting the video section
For adjusting the color viewfinder

For connecting the battery terminal and DC power supply

For extension between the CD-212 board (CN1401) and
the VC-213 board (CN501)(720H model)
For extension between the CD-213 board (CN2401) and
the VC-213 board (CN501)(960H model)

For extension between the DD-117 board (CN931) and
the VC-213 board (CN914)

For adjusting the IR transmitter

For adjusting the flange back

For adjusting the flange back

• Oscilloscope

• Color monitor

• Vectorscope

• Regulated power supply

• Digital voltmeter

If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages
cannot be switched. In this case, replace with the new micro
processor (8-759-148-35).

Connect the adjustment remote commander to the LANC jack,
and set to HOLD switch to the “ADJ” side.

720H model:DCR-TR7000/TRV103/TRV110/TRV110P/

TRV203/TRV210/TRV310/TRV310P/TRV315

960H model:DCR-TR7000E/TR7100E/TRV110E/TRV210E/

TRV310E

J-14

J-15

5-5

Front of the lens

1.5 m

Pattern box

Fig. 5-1-2.

For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.

When performing only the adjustments, the lens block and boards
need not be disassembled.

2.5 LCD model: DCR-TRV103/TRV110/TRV110E/TRV110P
3/3.5 LCD model: DCR-TRV203/TRV210/TRV210E/TRV310/

TRV310E/TRV310P/TRV315
TR model: DCR-TR7000/TR7000E/TR7100E

1)

Connect the equipment for adjustments according to Fig. 5-1-3,
4, 5.

2)

The front panel block (MA-354/355/357 board,  focus dial,
microphone unit) must be assembled because the focus ring is
used for adjustments.

As removing the cabinet (R) (removing the VC-213 board CN911)
means removing the lithium 3V power supply (CF-62/63/65 board
BH001), data such as date, time, user-set menus will be lost. After
completing adjustments, reset these data. If the cabinet (R) has
been removed, the self-diagnosis data, data on history of use (total
drum rotation time, etc. ) will be lost. Before removing, note down
the self-diagnosis data and data on history use (data of page: 2,
address: A2 to AA). (Refer to “SELF-DIAGNOSIS FUNCTION”
for the self-diagnosis data, and to “5-4. Service Mode” for the
data on the history use.)

Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE

button of the adjustment remote commander.
The above procedure will enable the camera power to be turned
on with the front panel block removed. After completing
adjustments, be sure to exit the “Forced Camera Power ON
Mode”.

Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE

button of the adjustment remote commander.

3) Select page: 0, address: 01, and set data: 00.

2.5 LCD model

3/3.5 LCD model

TR model

MA board

MA-354

MA-355

MA-357

CF board

CF-62

CF-63

CF-65

5-6

Fig. 5-1-3.

CN934

CN933

CN801

Note 1 : Press the battery switch of the battery terminal using adhesive tape, etc.
Note 2 : 720H model : DCR-TRV103/TRV110/TRV110P
             960H model : DCR-TRV110E

Regulated power 
supply (Note 1)
(8.4 

±

 0.1Vdc)

CPC-13 jig
(J-6082-443-A)

Terminated at 75

Ω

CD-213 board CN2401 (960H model)
or
CD-212 board CN1401 (720H model)

Color monitor

Vector scope

Lens block

Extension cable 

(16P, 0.5mm)

(J-6082-357-A)

Need not connected

Battery
terminal

Adjustment remote

commander

Battery switch

DC IN jack

LANC 
  jack

Cabinet (L)

Need not 
connected 

CN935

CN936

DD-117 board

CN931

Must be connected when
performing the video system
adjustments. 

CN910

CN914

CN908

CN906

CN905

CN101

CN901

CN903

CN904

CN101

Need not connected

Front panel block

VIDEO jack

PJ-95 board 

SE-86 board CN601

MA-354 board CN304

To PD-105 board CN5802

Extension cable (70P, 0.5mm)
(J-6082-439-A)

To CF-62 board CN001

Cabinet (R)

CN5805

CN5802

CN5803

CN5804

Must be connected when performing
the LCD system adjustments.

CN5701

PD-105 board

CN5501

CN5601

VC-213 board

CN501

CN909

CN551

CN911

LCD WINDOW

Multi CPC jig
(J-6082-311-A)

5-7

Fig. 5-1-4.

CN5701

CN934

CN933

CN801

Note 1 : Press the battery switch of the battery terminal using adhesive tape, etc.
Note 2 : 720H model : DCR-TRV203/TRV210/TRV310/TRV310P/TRV315
             960H model : DCR-TRV210E/TRV310E
Note 3 : Color EVF model : DCR-TRV315

Color monitor

Vector scope

Terminated at 75

Ω

Regulated power 
supply (Note 1)
(8.4 

±

 0.1Vdc)

Need not connected

Adjustment remote

commander

CD-213 board CN2401 (960H model)
or
CD-212 board CN1401 (720H model)

Battery
terminal

Lens block

Extension cable
(16P, 0.5mm)
(J-6082-357-A)

Battery switch

DC IN jack

Need not connected

Front panel block

VIDEO jack

PJ-96 board 

Need not
connected 

LANC
  jack

Must be connected when
performing the video system
or color EVF system adjustments

To PD-106 board CN5900

MA-355 board CN304

SE-87 board CN601

Extension cable (70P, 0.5mm)
(J-6082-439-A)

To CF-63 board CN001

Cabinet (L)

CPC-13 jig
(J-6082-443-A)

Multi CPC jig
(J-6082-311-A)

Must be connected when performing
the LCD system adjustments.

Cabinet (R)

LCD WINDOW

CN904

CN101

CN5601

PD-106 board

CN5501

CN5902

CN5900

CN5901

CN5904

CN901

CN101

CN903

CN905

VC-213 board

CN911

CN501

CN909

CN551

CN910

CN914

DD-117 board

CN936

CN935

CN906

CN908

CN931