Sony DCR-PC103E / DCR-PC104E / DCR-PC105 / DCR-PC105E (serv.man2) Service Manual ▷ View online
2-11
DCR-PC103E/PC104E/PC105/PC105E
2-12. PD-193 BOARD
2-13. CABINET (REAR)
PD-193
6
PD-193 board
1
Two screws
(M1.7
×
2.5),
lock ace, p2
2
LCD cabinet (L) assembly
3
LCD panel protection sheet
4
Liquid crystal
indicator module
5
Back light
Cold cathode
fluorescent tube
fluorescent tube
(24P)
(6P)
(6P)
1
Battery lock
A
When installing the Cabinet (Rear),
install it while aligning the switch of the
Operation Switch Block (PS4400) with
the position
install it while aligning the switch of the
Operation Switch Block (PS4400) with
the position
A
.
Be careful not to drop
the compression coil.
the compression coil.
Control switch block
(PS4400)
(PS4400)
4
Remove the cabinet (rear)
in the direction of the arrow.
3
Screw
(M1.7
×
2.5),
lock ace, p2
2
Compression
spring
Caution
Caution
2-12
DCR-PC103E/PC104E/PC105/PC105E
2-15. ST-084 BOARD (PC105/PC105E)
2-14. CONTROL SWITCH BLOCK (PS4400)
2
Control switch block
(PS4400) (10P)
3
Control switch block
(PS4400)
Open/close switch
If you install the Operation Switch
Block (PS4400) while the G Frame
Assy is left open, the open/close
switch will be broken. To install the
Operation Switch Block (PS4400),
be sure to install it after the G
Frame Assy is closed.
Block (PS4400) while the G Frame
Assy is left open, the open/close
switch will be broken. To install the
Operation Switch Block (PS4400),
be sure to install it after the G
Frame Assy is closed.
Control switch block
(PS4400)
(PS4400)
G frame assembly
1
Screw
(M1.7
×
2.5),
lock ace, p2
Caution
3
Flash unit (FL4400)
(19P)
2
Condenser holder
5
ST-084 board
4
ST-084 board (16P)
Caution
Note: High-voltage cautions.
(See page 1-2)
1
Screw
(M1.7
×
2.5),
lock ace, p2
2-13
DCR-PC103E/PC104E/PC105/PC105E
2-16. LENS/EVF/ST SECTION-1
Lens fixed sheet
4
VF-156 board
(60P)
3
CD-444 board
(40P)
1
Lens fixed sheet
2
flexible board
(from the Lens device)
Caution
flexible board
(from the Lens device)
(from the Lens device)
2-17. LENS/EVF/ST SECTION-2
1
Screw
(M1.7
×
2.5),
lock ace, p2
Rubber of the
Mic unit
Mic unit
5
Lens/EVF/ST section
4
Three screws (M1.7
×
2.5),
lock ace, p2
2
Two screws
(M1.7
×
2.5),
lock ace, p2
Nightshot
switch
switch
Caution
To attach the Lens/EVF/ST section,
align the nightshot switch position
as shown.
align the nightshot switch position
as shown.
Caution
3
Cabinet (upper)
When installing the cabinet
(upper), insert the cabinet (upper)
in straight down so that the rubber
of the Mic Unit shoud not be
deformed.
(upper), insert the cabinet (upper)
in straight down so that the rubber
of the Mic Unit shoud not be
deformed.
2-14
DCR-PC103E/PC104E/PC105/PC105E
2-18. EVF SECTION
4
Mic unit (6P)
3
FP-671 flexible board (10P)
5
EVF section
1
Dowel
2
Claw
Click on the first or last page to see other DCR-PC103E / DCR-PC104E / DCR-PC105 / DCR-PC105E (serv.man2) service manuals if exist.