Sony DCR-PC101 / DCR-PC101E (serv.man2) Service Manual ▷ View online
33
Recording
–
Basics
Recording a picture
Using NightShot
Set the POWER switch to CAMERA or MEMORY, then slide NIGHTSHOT to ON.
The
The
indicator and “NIGHTSHOT” flash on the screen. To cancel NightShot, slide
NIGHTSHOT to OFF.
Notes
•Do not use the NightShot function in bright places (e.g. outdoors in the daytime). This
•Do not use the NightShot function in bright places (e.g. outdoors in the daytime). This
may cause your camcorder to malfunction.
•When you keep NIGHTSHOT set to ON in normal recording, the picture may be
recorded in incorrect or unnatural colors.
•If focusing is difficult when using the NightShot function, focus manually.
•Do not cover the NightShot Light emitter when using the NightShot function.
•Do not cover the NightShot Light emitter when using the NightShot function.
While using NightShot, you cannot use the following functions:
– Exposure
– Flexible Spot Meter
– PROGRAM AE (The indicator flashes.)
– White balance
– Exposure
– Flexible Spot Meter
– PROGRAM AE (The indicator flashes.)
– White balance
Using Super NightShot
Super NightShot makes subjects more than 16 times brighter than those recorded in
NightShot.
NightShot.
(1) Set the POWER switch to CAMERA, then slide NIGHTSHOT to ON. The
indicator and “NIGHTSHOT” flash on the screen.
(2) Press SUPER NS. The
indicator and “SUPER NIGHTSHOT“ flash on the
screen.
To cancel Super NightShot, press SUPER NS again.
To cancel Super NightShot, press SUPER NS again.
While using Super NightShot
The shutter speed will be automatically adjusted depending on the brightness of the
background. The motion of the moving picture may slow down.
The shutter speed will be automatically adjusted depending on the brightness of the
background. The motion of the moving picture may slow down.
While using Super NightShot, you cannot use the following functions:
– Fader
– Exposure
– Digital effect
– PROGRAM AE
– Recording on a “Memory Stick” in tape recording or tape recording standby
– White balance
– Flexible Spot Meter
– Fader
– Exposure
– Digital effect
– PROGRAM AE
– Recording on a “Memory Stick” in tape recording or tape recording standby
– White balance
– Flexible Spot Meter
When the POWER switch is set to MEMORY
You cannot use Super NightShot function.
You cannot use Super NightShot function.
34
Recording a picture
Using the NightShot Light
The picture will be clearer with the NightShot Light on. To activate NightShot Light, set
N.S.LIGHT to ON in the menu settings (p. 185).
(The default setting is ON.)
N.S.LIGHT to ON in the menu settings (p. 185).
(The default setting is ON.)
NightShot Light
NightShot Light rays are infrared and so are invisible. The maximum shooting distance
using the NightShot Light is about 3 m (10 feet).
NightShot Light rays are infrared and so are invisible. The maximum shooting distance
using the NightShot Light is about 3 m (10 feet).
Using Color Slow Shutter
Color Slow Shutter enables you to record color images in a dark place.
(1) Set the POWER switch to CAMERA, slide NIGHTSHOT to OFF.
(2) Press COLOR SLOW S.
(2) Press COLOR SLOW S.
The
indicator and COLOR SLOW SHUTTER flash on the screen.
To cancel the Color Slow Shutter function, press COLOR SLOW S again.
While using Color Slow Shutter
The shutter speed will be automatically adjusted depending on the brightness of the
background. The motion of the moving picture may slow down.
The shutter speed will be automatically adjusted depending on the brightness of the
background. The motion of the moving picture may slow down.
When the POWER switch is set to MEMORY
You cannot use Color Slow Shutter function.
You cannot use Color Slow Shutter function.
While using the Color Slow Shutter function, you cannot use the following
functions:
– Fader
– Exposure
– Digital effect
– PROGRAM AE
– Recording on a “Memory Stick” in tape recording or tape recording standby
– Flexible Spot Meter
functions:
– Fader
– Exposure
– Digital effect
– PROGRAM AE
– Recording on a “Memory Stick” in tape recording or tape recording standby
– Flexible Spot Meter
In total darkness
Color Slow Shutter may not work properly.
Color Slow Shutter may not work properly.
35
Recording
–
Basics
Self-timer recording
Recording automatically starts in 10 seconds after you set the self-timer. You can also
use the Remote Commander for this operation.
use the Remote Commander for this operation.
(1) In standby, press FN and select PAGE2 (p. 22).
(2) Press SELFTIMER.
(2) Press SELFTIMER.
The
(self-timer) indicator appears on the screen.
(3) Press START/STOP.
The self-timer starts counting down from 10 with a beep sound. In the last two
seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
To stop the count down
Press START/STOP.
To restart the countdown, press START/STOP again.
To restart the countdown, press START/STOP again.
To cancel self-timer recording
Press SELFTIMER so that the
(self-timer) indicator disappears from the screen while
your camcorder is in standby. You cannot cancel self-timer recording using the Remote
Commander.
Commander.
Note
Self-timer recording is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHARGE) or VCR.
Self-timer recording is automatically canceled when:
– Self-timer recording is finished.
– The POWER switch is set to OFF (CHARGE) or VCR.
When the POWER switch is set to MEMORY
You can also record images with the self-timer (p. 126, 138).
You can also record images with the self-timer (p. 126, 138).
Recording a picture
1
FN
START/STOP
START/STOP
36
You can use these buttons to check the recorded picture or shot so that the transition
between the last recorded scene and the next scene you record is smooth.
between the last recorded scene and the next scene you record is smooth.
END SEARCH
You can go to the end of the recorded section after you record.
(1) In standby, press FN to display PAGE1 (p. 22).
(2) Press END SCH.
(2) Press END SCH.
The last five seconds of the recorded section are played back and your
camcorder returns to standby. You can monitor the sound from the speaker or
headphones.
camcorder returns to standby. You can monitor the sound from the speaker or
headphones.
To return to FN
Press EXIT.
To stop searching
Press END SCH again.
END SEARCH function
When you use a tape without cassette memory, END SEARCH does not work once you
eject the cassette after you have recorded on the tape. If you use a tape with cassette
memory, END SEARCH works even after you eject the cassette.
When you use a tape without cassette memory, END SEARCH does not work once you
eject the cassette after you have recorded on the tape. If you use a tape with cassette
memory, END SEARCH works even after you eject the cassette.
If a tape has a blank portion in the recorded sections
END SEARCH may not work correctly.
END SEARCH may not work correctly.
Checking the recording
– END SEARCH/EDITSEARCH/Rec Review
– END SEARCH/EDITSEARCH/Rec Review
EDIT
1
FN
Click on the first or last page to see other DCR-PC101 / DCR-PC101E (serv.man2) service manuals if exist.