Sony DCR-HC16E / DCR-HC18E / DCR-HC20 / DCR-HC20E (serv.man4) Service Manual ▷ View online
6-3
DCR-HC16E/HC18E/HC20/HC20E
Board
EEPROM
replacement replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
CD-489 board
(COMPLETE)
PD-213 board
(COMPLETE)
SE-141 board
(COMPLETE)
VC-350 board
(COMPLETE)
VC-350 board
IC8602 (EEPR
OM)
Supporting
Table. 6-1-1(2).
• Adjusting items when replacing a board or EEPROM
When replacing a board or EEPROM, adjust the items indicated by z in the following table.
Adjustment
Section
Initialization of
8, A, C, D, E, F,
1C, 1F page data
Camera
EVF
LCD
Mechanism
System control
Servo, RF
Video
Adjustment
Initialization of A, D page data
Initialization of 8, C, 1C page data
Initialization of E, F, 1F page data
36MHz origin oscillation adj.
HALL adj.
Flange back adj.
Optical axis adj.
Color reproduction adj.
MAX GAIN adj.
LV standard data input
AWB standard data input
Auto white balance adj.
Steady shot check
EVF automatic adj.
LCD automatic adj.
V COM adj.
Transmissive mode white balance adj.
Reflective mode white balance adj.
Tape path adj.
Touch panel adj.
Serial No. input
CAP FG duty adj.
Switching position adj.
Error rate check
S VIDEO OUT Y level adj.
S VIDEO OUT chroma level adj.
6-4
DCR-HC16E/HC18E/HC20/HC20E
6-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
J-1
J-2
J-3
J-4
Filter for color
temperature correction
(C14)
J-6080-058-A
temperature correction
(C14)
J-6080-058-A
ND filter 1.0
J-6080-808-A
J-6080-808-A
ND filter 0.4
J-6080-806-A
J-6080-806-A
ND filter 0.1
J-6080-807-A
J-6080-807-A
Pattern box PTB-450
J-6082-200-A
J-6082-200-A
Color chart for
pattern box
J-6020-250-A
pattern box
J-6020-250-A
J-5
J-6
J-7
J-8
Siemens star chart
J-6080-875-A
J-6080-875-A
Clear chart for
pattern box
J-6080-621-A
pattern box
J-6080-621-A
Mini pattern box
J-6082-353-B
J-6082-353-B
Adjustment remote
commander
(RM-95 upgraded)
J-6082-053-B
commander
(RM-95 upgraded)
J-6082-053-B
J-9
J-10
A: CPC-15
J-6082-564-A
J-6082-564-A
B: I/F unit for
LANC control
J-6082-521-A
LANC control
J-6082-521-A
Camera table
J-6082-384-A
J-6082-384-A
A
B
Fig. 6-1-1.
Ver 1.1 2004. 07
6-5
DCR-HC16E/HC18E/HC20/HC20E
1-1-2.
Preparations
Note1:
For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
DISASSEMBLY”.
Note2:
When performing only the adjustments, the lens block and boards
need not be disassembled.
need not be disassembled.
Note3:
Before performing the adjustments, check the data of page: 0,
address: 10 is “00”. If not, set data: 00 to this address.
address: 10 is “00”. If not, set data: 00 to this address.
1)
Connect the equipment for adjustments according to Fig. 6-1-
3.
3.
Note4:
As removing the MS-200 board (removing CN1005 of the VC-
350 board) means removing the lithium 3V power supply (BT501
on the MS-200 board), data such as date, time, user-set menus
will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the lithium 3V power
supply is removed. (Refer to “6-4.Service Mode” for the self-
diagnosis data and the data on history of use.)
350 board) means removing the lithium 3V power supply (BT501
on the MS-200 board), data such as date, time, user-set menus
will be lost. After completing adjustments, reset these data.
But the self-diagnosis data and the data on history of use (total
drum rotation time etc.) will be kept even if the lithium 3V power
supply is removed. (Refer to “6-4.Service Mode” for the self-
diagnosis data and the data on history of use.)
Note5:
Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the control key block (SS6300) removed. After completing
adjustments, be sure to exit the “Forced Camera Power ON Mode”.
(Operate the camera functions using the touch panel. When the
control key block (SS6300) is removed, the function buttons of
the adjustment remote commander are not effective even if the
HOLD switch of the adjustment remote commander is set to the
OFF position.)
on with the control key block (SS6300) removed. After completing
adjustments, be sure to exit the “Forced Camera Power ON Mode”.
(Operate the camera functions using the touch panel. When the
control key block (SS6300) is removed, the function buttons of
the adjustment remote commander are not effective even if the
HOLD switch of the adjustment remote commander is set to the
OFF position.)
Note6:
Exiting the “Forced Camera Power ON” Mode
1)
Select page: 0, address: 01, and set data: 01.
2)
Select page: D, address: 10, set data: 00, and press the PAUSE
button.
button.
3)
Select page: 0, address: 01, and set data: 00.
Fig. 6-1-2.
Front of the lens
Pattern box
1.0 m
6-6
DCR-HC16E/HC18E/HC20/HC20E
Fig. 6-1-3.
7
5
3
2
2
6
4
1
3
4
1
3
AC power
adaptor
adaptor
AC IN
Adjustment remote
commander (RM-95)
commander (RM-95)
LANC jack
DC-IN connector
For tape path adjustment
CPC lid
Screw (M1.7x4)
black
black
8
1
1
RF MON
2
SWP
3
GND
4
XSC EEP
5
EEP SCK
6
EEP SO
7
EEP SI
I/F unit for LANC control
(J-6082-521-A)
(J-6082-521-A)
CPC-15
(J-6082-564-A)
(J-6082-564-A)
*1
*1
[CONNECTION OF EQUIPMENT]
CN002
CN001
BATT
LANC
Not used
Not used
Not used.
Not used
*1: Don’t connect any cable
to these connectors.
Click on the first or last page to see other DCR-HC16E / DCR-HC18E / DCR-HC20 / DCR-HC20E (serv.man4) service manuals if exist.