Sony DCR-DVD505 / DCR-DVD505E / DCR-DVD905 / DCR-DVD905E (serv.man4) Service Manual ▷ View online
6-14
DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ
4.
Preparing the Flash Adjustment Box
A dark room is required to provide an accurate flash adjustment.
If it is not available, prepare the flash adjustment box as given
below;
If it is not available, prepare the flash adjustment box as given
below;
1) Provide woody board A, B and C of 15 mm thickness.
2) Apply black mat paint to one side of woody board A and B.
3) Attach background paper (J-2501-130-A) to woody board C.
4) Assemble so that the black sides and the background paper
3) Attach background paper (J-2501-130-A) to woody board C.
4) Assemble so that the black sides and the background paper
side of woody board A, B and C are internal. (Fig. 6-1-7)
Fig. 6-1-6
Fig. 6-1-7
woody board A (2)
400 mm
woody board B (2)
370 mm
woody board C (1)
700 mm
513 mm
513 mm
700 mm
700 mm
730 mm
woody board A
woody board B
woody board B
woody board C
woody board A
Fig. 6-1-8
Flash adjustment box
Front of the lens
Background paper
L = 50cm
L
Camera
6-15
DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ
1-2.
INITIALIZATION OF EVR DATA
Note 1:
Pages used for the EVR consists of 25 pages. There are
9, A to D, F, 13, 15, 17, 1A to 1C, 63 to 6F pages.
9, A to D, F, 13, 15, 17, 1A to 1C, 63 to 6F pages.
Note 2:
When reading or writing the 13, 15, 17, 1A, 1B or 1C
page data, select page: 0, address: 10, and set data: 01,
then select 3, 5, 7, A, B or C page. The 13, 15, 17, 1A, 1B
or 1C page can be chosen by this data setting.
After reading or writing, reset the data or page: 0, ad-
dress: 10 to “00”.
page data, select page: 0, address: 10, and set data: 01,
then select 3, 5, 7, A, B or C page. The 13, 15, 17, 1A, 1B
or 1C page can be chosen by this data setting.
After reading or writing, reset the data or page: 0, ad-
dress: 10 to “00”.
Note 3:
When reading or writing the 63 to 6F page data, select
page: 0, address: 10, and set data: 06, then select 3, 4, 5,
6, 7, 8, 9, A, B, C, D, E, or F page. The 63, 64, 65, 66, 67,
68, 69, 6A, 6B, 6C, 6D, 6E, or 6F page can be chosen by
this data setting.
After reading or writing, reste the data of page: 0, ad-
dress: 10 to “00”.
page: 0, address: 10, and set data: 06, then select 3, 4, 5,
6, 7, 8, 9, A, B, C, D, E, or F page. The 63, 64, 65, 66, 67,
68, 69, 6A, 6B, 6C, 6D, 6E, or 6F page can be chosen by
this data setting.
After reading or writing, reste the data of page: 0, ad-
dress: 10 to “00”.
1-2-1.
Initialization of 9, A, B, D, 13, 15, 17, 1A, 1B Page
Data
Data
Note:
Check that the data of page: 0, address: 10 is “00”.
1.
Initializing of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data
Note 1:
If the 9, A, B, D, 13, 15, 17, 1A, 1B page data has been
initialized, the following adjustments need to be per-
formed again.
1) Modification of 9, A, B, D, 13, 15, 17, 1A, 1B page data
2) Touch Panel adjustment
3) Audio system adjustment
initialized, the following adjustments need to be per-
formed again.
1) Modification of 9, A, B, D, 13, 15, 17, 1A, 1B page data
2) Touch Panel adjustment
3) Audio system adjustment
Note 2:
NTSC model: DCR-DVD505/DVD905
PAL model: DCR-DVD505E/DVD905E
PAL model: DCR-DVD505E/DVD905E
Adjustment Page
9
Adjustment Address
00 to FF
Adjustment Page
A
Adjustment Address
10 to FF
Adjustment Page
B
Adjustment Address
00 to FF
Adjustment Page
D
Adjustment Address
10 to 7F
Adjustment Page
13
Adjustment Address
00 to FF
Adjustment Page
15
Adjustment Address
00 to FF
Adjustment Page
17
Adjustment Address
00 to FF
Adjustment Page
1A
Adjustment Address
00 to FF
Adjustment Page
1B
Adjustment Address
00 to FF
Initializing method:
Order Page Address Data
Procedure
1
0
01
01
2
0
10
00
Set the following data
20: Initializing A page
21: Initializing B page
22: Initializing D page
23: Initializing 1A page
24: Initializing 1B page
25: Initializing A and 1A
21: Initializing B page
22: Initializing D page
23: Initializing 1A page
24: Initializing 1B page
25: Initializing A and 1A
page
3
7
01
26: Initializing B and 1B
page
28: Initializing 9 page
29: Initializing 15 page
2A: Initializing 17 page
2B: Initializing 13 page
2E: Initializing 9, A, B, D,
13, 15, 17, 1A and 1B
page
page
Set the following data
4
7
04
30: NTSC model
31: PAL model
31: PAL model
5
7
05
00
Press PAUSE (Write) button.
6
7
00
01
Press PAUSE (Write) button.
7
7
02
Check the data changes to
“01”.
“01”.
8
7
01
FF
9
7
00
01
Press PAUSE (Write) button.
Perform “Modification of 9,
10
A, B, D, 13, 15, 17, 1A, 1B
Page Data”
Page Data”
6-16
DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ
2.
Modification of 9, A, B, D, 13, 15, 17, 1A, 1B Page
Data
Data
If the 9, A, B, D, 13, 15, 17, 1A, 1B page data has been initialized,
change the data of the “Fixed data-2” address shown in the fol-
lowing table by manual input.
change the data of the “Fixed data-2” address shown in the fol-
lowing table by manual input.
Modifying Method:
1) Before changing the data, select page: 0, address: 01, and set
1) Before changing the data, select page: 0, address: 01, and set
data: 01.
2) If modification of data on pages 9, A, B, D, set data: 00 to
page: 0, address: 10, and then select pages 9, A, B, D.
3) If modification of data on pages 13, 15, 17, 1A, 1B, set data:
01 to page: 0, address: 10, and then select pages 3, 5, 7, A, B.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
After the modification of data finished, return the data on page:
0, address: 10 to “00”.
4) New data for changing are not shown in the tables because
they are different in destination. When changing the data, copy
the data built in the same model.
the data built in the same model.
Note 1:
If copy the data built in the different model, the
camcorder may not operate.
camcorder may not operate.
5) When changing the data, press the PAUSE (Write) button of
the adjustment remote commander each time when setting new
data to write the data in the non-volatile memory.
data to write the data in the non-volatile memory.
6) Check that the data of adjustment addresses is the initial value.
If not, change the data to the initial value.
Processing after Completing Modification 9, A, B, D, 13, 15,
17, 1A, 1B page data:
17, 1A, 1B page data:
Order Page Address Data
Procedure
1
0
10
00
2
7
01
FF
3
7
00
01
Press PAUSE (Write) button.
Note 2:
If following symptoms occur after completing of the
“Modification 9, A, B, D, 13, 15, 17, 1A, 1B page data”,
check that the data of the “Fixed data-2” address of 9, A,
B, D, 13, 15, 17, 1A, 1B page are same as those of same
model of same destination.
1) The power is shut off so that unit cannot operate.
“Modification 9, A, B, D, 13, 15, 17, 1A, 1B page data”,
check that the data of the “Fixed data-2” address of 9, A,
B, D, 13, 15, 17, 1A, 1B page are same as those of same
model of same destination.
1) The power is shut off so that unit cannot operate.
3.
9 Page table
Note 1:
Check that the data of page: 0, address: 10 is“00”.
Note 2:
Fixed data-1: Initialized data. (Refer to“1. Initializing the
9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to FF
Fixed data-1 (Initialized data)
6-17
DCR-DVD505/DVD505E/DVD905/DVD905E_ADJ
4.
A Page table
Note 1:
Check that the data of page: 0, address: 10 is“00”.
Note 2:
Fixed data-1: Initialized data. (Refer to“1. Initializing the
9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Fixed data-2: Modified data. (Refer to“2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
10
00
00
Test mode
11 to 1B
Fixed data-1 (Initialized data)
1C
Fixed data-2
1D to 4C
Fixed data-1 (Initialized data)
4D
Fixed data-2
4E to 60
Fixed data-1 (Initialized data)
61
Fixed data-2
62
Fixed data-1 (Initialized data)
63
Fixed data-2
64 to 84
Fixed data-1 (Initialized data)
85
Fixed data-2
86 to 8F
Fixed data-1 (Initialized data)
90
E7
EA
91
13
10
92
CD
C1
Touch panel adj.
93
23
1C
94 to 9F
Fixed data-1 (Initialized data)
A0
A1
A2
A3
A4
A5
Fixed data-2
A6
A7
A8
A9
AA
AB, AC
Fixed data-1 (Initialized data)
AD
Fixed data-2
AE to B6
Fixed data-1 (Initialized data)
B7
B8
B9
Fixed data-2
BA
BB to CD
Fixed data-1 (Initialized data)
CE
Fixed data-2
CF to DF
Fixed data-1 (Initialized data)
E0
E1
E2
Fixed data-2
E3
Address
Initial value
Remark
NTSC
PAL
E4
E5
Fixed data-2
E6
E7 to FF
Fixed data-1 (Initialized data)
5.
B Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the 9, A, B, D, 1A, 13, 15, 17, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
the 9, A, B, D, 1A, 13, 15, 17, 1B Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of 9, A, B, D, 13, 15, 17, 1A, 1B Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 08
Fixed data-1 (Initialized data)
09
Fixed data-2
0A, 0B
Fixed data-1 (Initialized data)
0C
00
00
0D
00
00
0E
00
00
Internal 4ch microphone sensitivity adj.
0F
00
00
10 to FF
Fixed data-1 (Initialized data)
Click on the first or last page to see other DCR-DVD505 / DCR-DVD505E / DCR-DVD905 / DCR-DVD905E (serv.man4) service manuals if exist.