Sony DCR-DVD305 (serv.man3) Service Manual ▷ View online
6-26
DCR-DVD305
3.
C Page table
Note 1:
Check that the data of page: 0, address: 10 is “00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of C, 1C Page Data”)
the C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of C, 1C Page Data”)
Address
Initial value
Remark
NTSC PAL
10 to 24
Fixed data-1 (Initialized data)
25
87
87
S VIDEO OUT Y level adj.
26
70
70
27
50
50
S VIDEO OUT chroma level adj.
28 to 3B
Fixed data-1 (Initialized data)
3C
Fixed data-2
3D, 3E
Fixed data-1 (Initialized data)
3F
6C
7A
VCO adj. (EVF)
40
90
80
41 to 44
Fixed data-1 (Initialized data)
45
7E
7E
White balance adj. (EVF)
46
7B
7B
47
58
58
Contrast adj. (EVF)
48 to 4C
Fixed data-1 (Initialized data)
4D
4E
Fixed data-2
4F
50
78
78
VCO adj. (LCD)
51
80
80
52
51
51
V-COM adj. (LCD)
53 to 55
Fixed data-1 (Initialized data)
56
75
75
Transmissive mode white balance
57
70
70
adj. (LCD)
58
5E
5E
Contrast adj. (LCD)
59 to 65
Fixed data-1 (Initialized data)
66
67
Fixed data-2
68 to 7A
Fixed data-1 (Initialized data)
7B
8E
8E
Reflective mode white balance adj.
7C
87
87
(LCD)
7D to 7F
Fixed data-1 (Initialized data)
80
91
8E
IC3401 LINE OUT Y gain adj.
81
AD
AF
IC3401 LINE OUT chroma gain adj.
82
7B
7D
83
00
00
84
00
00
85
00
00
86
00
00
87
0C
0F
IC3401 adj.
88
36
46
89
F8
18
8A
20
21
8B to 98
Fixed data-1 (Initialized data)
Address
Initial value
Remark
NTSC PAL
99
85
8A
IC3401 adj.
9A to A0
Fixed data-1 (Initialized data)
A1
20
20
A2
20
20
IC3401 adj.
A3
20
20
A4 to E3
Fixed data-1 (Initialized data)
E4
Fixed data-2
E5 to F1
Fixed data-1 (Initialized data)
F2
Fixed data-2
F3 to FF
Fixed data-1 (Initialized data)
6-27
DCR-DVD305
4.
1C Page table
Note 1:
If reading/writing data on pages 1C, set data: 01 to page:
0, address: 10, and then select pages: C. By this data set-
ting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to“00”.
0, address: 10, and then select pages: C. By this data set-
ting, the pages 1C can be selected.
After the data reading/writing finished, return the data
on page: 0, address: 10 to“00”.
Note 2:
Fixed data-1: Initialized data. (Refer to “1. Initializing
the C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of C, 1C Page Data”)
the C, 1C Page Data”)
Fixed data-2: Modified data. (Refer to “2. Modification
of C, 1C Page Data”)
Address
Initial value
Remark
NTSC PAL
00 to 55
Fixed data-1 (Initialized data)
56
Fixed data-2
57
Fixed data-1 (Initialized data)
58
59
Fixed data-2
5A to 60
Fixed data-1 (Initialized data)
61
Fixed data-2
62 to 6B
Fixed data-1 (Initialized data)
6C
6D
6E
Fixed data-2
6F
70 to A1
Fixed data-1 (Initialized data)
A2
20
20
A3
20
20
IC3401 adj.
A4
20
20
A5 to BD
Fixed data-1 (Initialized data)
BE
BF
Fixed data-2
C0 to C3
Fixed data-1 (Initialized data)
C4
C5
C6
Fixed data-2
C7
C8 to CA
Fixed data-1 (Initialized data)
CB
Fixed data-2
CC to E2
Fixed data-1 (Initialized data)
E3
E4
Fixed data-2
E5 to FF
Fixed data-1 (Initialized data)
6-28
DDCR-DVD305
1-3. ADJUSTMENT PROGRAM
The DCR-DVD205/DVD205E/DVD304E/DVD305/DVD305E/
DVD705/DVD705E/DVD755/DVD755E are adjusted by the Au-
tomatic Adjustment Program. The Automatic Adjustment Program
enters automatically via the SeusCam the adjustment operations
that were formerly entered manually by the adjustment remote
commander (some items may be adjusted by manual operation on
the operation screen of the SeusCam).
DVD705/DVD705E/DVD755/DVD755E are adjusted by the Au-
tomatic Adjustment Program. The Automatic Adjustment Program
enters automatically via the SeusCam the adjustment operations
that were formerly entered manually by the adjustment remote
commander (some items may be adjusted by manual operation on
the operation screen of the SeusCam).
1.
Precautions When Using Automatic Adjustment Pro-
gram
gram
1) The Automatic Adjustment Program writes the adjustment re-
sults such as EVR data to the set through two-way communi-
cation with the camera via the SeusCam. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusCam operates.
cation with the camera via the SeusCam. Accordingly, the Au-
tomatic Adjustment Program must be used in the environment
where the SeusCam operates.
2) The Automatic Adjustment Program cannot be used when the
SEUS (digital camera adjustment software) is running. Exit
the SEUS before using the Automatic Adjustment Program.
the SEUS before using the Automatic Adjustment Program.
3) The SeusCam must be already started on the PC when using
the Automatic Adjustment Program. With the SeusCam not
started, some adjustment items will take time in adjustment.
started, some adjustment items will take time in adjustment.
4) The program run time may vary depending on the environ-
ment of the personal computer used.
Note:
Before using the Automatic Adjustment Program, set the
following data using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the
following data using the adjustment remote commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 01, and press the
PAUSE (Write) button.
These settings are released if the
[END]
button is clicked
on the Main Menu screen of the Automatic Adjustment Pro-
gram.
gram.
2.
Start of Automatic Adjustment Program
Double-click the application file (DCR-DVD205 Series Auto-Adj
Ver_1.
Ver_1.
[]
r
[][]
.exe), and the Automatic Adjustment Program will start.
Note:
[]
(numeric value) of the file name varies depending on the
version of Automatic Adjustment Program.
3.
Function of Each Button on Main Menu Screen
When the Automatic Adjustment Program started, the Main Menu
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.
screen in Fig. 6-1-6 will appear. On this screen, select each adjust-
ment section.
Fig. 6-1-6
1
[Connecting the Equipment]
button
A connection diagram of the equipment is displayed.
2
[VIDEO SYSTEM ADJUSTMENT]
button
The “VIDEO SYSTEM ADJUSTMENT” screen appears.
3
[CAMERA SYSTEM ADJUSTMENT]
button
The “CAMERA SYSTEM ADJUSTMENT” screen appears.
4
[LCD SYSTEM ADJUSTMENT]
button
The “LCD SYSTEM ADJUSTMENT” screen appears.
5
[AUDIO SYSTEM ADJUSTMENT]
button
The “AUDIO SYSTEM ADJUSTMENT” screen appears.
6
[Initializing of Flash Back Up]
button
The “Initializing of Flash Back Up” screen appears.
7
[END]
button
The Automatic Adjustment Program finishes.
At this time, the data set by the adjustment remote commander
are released.
If the data are not released with the
At this time, the data set by the adjustment remote commander
are released.
If the data are not released with the
[END]
button, release them
through the following procedure using the adjustment remote
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 00, and press the
commander.
1) Select page: 0, address: 01, and set data: 01.
2) Select page: A, address: 14, set data: 00, and press the
PAUSE (Write) button.
3) Select page: 0, address: 01, and set data: 00.
8
This part indicates the version of Automatic Adjustment Pro-
gram.
gram.
7
4
3
2
1
5
6
8
6-29
DCR-DVD305
4.
Initializing of Flash Back Up
Click the
[Initializing of Flash Back Up]
button on the Main Menu
screen, and the “Initializing of Flash Back Up” screen in Fig. 6-1-
7 will appear.
7 will appear.
Fig. 6-1-7
[Initializing method]
1) Click the
1) Click the
[Initializing Start]
button.
2) The initialization finishes when the following message is dis-
played.
Click on the first or last page to see other DCR-DVD305 (serv.man3) service manuals if exist.