Sony DCR-DVD200 / DCR-DVD200E / DCR-DVD300 (serv.man2) Service Manual ▷ View online
2-18
DCR-DVD200/DVD200E/DVD300
2-28.LB-084 BOARD (REMOVING OF THE EVF)-1
7
Eye cup (55)
assembly
6
S
crew
(M1.7
×
2.5),
lock ace, p2
FP-603 flexible
board
board
3
S
crew
(M1.7
×
4),
lock ace, p2
(black)
(black)
5
S
crew
(M1.7
×
2.5),
lock ace, p2
4
VF hinge assembly,
VF tilt cabinet
When installing the VF blind, fold the FP-603 flexible
board as shown in the illustration.
board as shown in the illustration.
Caution
1
Two claws
2
VF blind
2-19
DCR-DVD200/DVD200E/DVD300
2-29.LB-084 BOARD (REMOVING OF THE EVF)-2
2
2
A
A
B
C
3
5
4
2
Align the dotted portion of the VF slide assembly
with the dotted line of the VF slide cabinet (lower).
1
Tapping screw
(M1.7
×
3.5)
4
Tapping screw
(M1.7
×
3.5)
1
VF slide assembly
VF slide cabinet (upper) assembly
VF slide cabinet (upper) assembly
To raise the VF slide cabinet (upper)
assembly, insert a flat head
(-) screwdriver into the position shown
by the arrow.
assembly, insert a flat head
(-) screwdriver into the position shown
by the arrow.
VF slide cabinet (upper) assembly
When re-assembling, slide the
Visibility knob (40) to the fully
right-end beforehand.
Visibility knob (40) to the fully
right-end beforehand.
3
Slide the VF slide cabinet assembly up to
the position in the direction of the arrow
where the two claws are locked.
where the two claws are locked.
RE-ASSEMBLING THE VF SLIDE CABINET
VF slide cabinet (lower)
VF slide cabinet (lower)
When re-assembling is completed,
the VF slide cabinet (upper) assembly
and the VF slide cabinet (lower) are
assembled as shown.
the VF slide cabinet (upper) assembly
and the VF slide cabinet (lower) are
assembled as shown.
VF slide cabinet (lower)
VF slide cabinet (lower)
Two claws
VF slide cabinet (lower)
Visibility knob (40)
Visibility knob (40)
2
Open the lock of the VF slide cabinet (lower) in the direction of the arrow
A
,
3
while slanting the VF slide cabinet (upper) assembly in the direction
of the arrow
B
,
4
remove the Visibility knob (40) from the VF slide cabinet (lower), and
5
remove the VF slide cabinet (upper) assembly by sliding it in the direction
of the arrow
C
.
2-20
DCR-DVD200/DVD200E/DVD300
qg
LCX032AN-5
qs
Lamp guide (40)
qa
Cushion LB (40)
8
FP-603
flexible board
7
Sheet (VF)
qk
LB-084 board
Projected part
q;
Two craws
qj
LCX032AN-5 (16P)
9
Two craws
qd
Illuminator (40)
qf
Prism sheet (40)
Cut-outs
3
Slide the VF slide cabinet assembly and others once
to the deep end, then slant them in the direction of
the arrow
the arrow
A
to release the claw portion of the VF slide
assembly and finally pull them out in the direction of the
arrow
arrow
B
and remove them.
qh
LCD cabinet assembly
A
B
1
Two screws
(M1.7
×
2.5),
lock ace, p2
2
Pull out the VF slide assembly fully
in the direction of the arrow.
5
Screw
(M1.7
×
2.5),
lock ace, p2
6
Remove the LCD cabinet assembly and others from the two dowels and
cut-outs of the VF slide assembly.
4
Screw
(M1.7
×
2.5),
lock ace, p2
Two dowels
VF slide assembly
VF slide Cabinet (upper) assembly
VF slide assembly, etc.
FP-603 flexible
board
board
Caution
Sheet (VF)
When attach the Sheet (VF),
fold the FP-603 flexible board
as shown in the illustration.
fold the FP-603 flexible board
as shown in the illustration.
Caution
Be careful not to drop
the Prism sheet (40) and
the Illuminator (40).
the Prism sheet (40) and
the Illuminator (40).
Caution
Be careful not to drop
the Cushion LB (40).
the Cushion LB (40).
2-30.LB-084 BOARD (REMOVING OF THE EVF)-3
2-21
DCR-DVD200/DVD200E/DVD300
2-31.LENS SECTION
VC-310
VC-310
2
Lens device
(27P)
3
FP-606 flexible board
(27P)
4
FP-604 flexible board
(10P) (DVD200)
FP-868 flexible board
(10P) (DVD200E/DVD300)
FP-868 flexible board
(10P) (DVD200E/DVD300)
5
Harness (CV-068)
(2P)
6
CD heat transe holder
9
Lens section
8
Two screws (M1.7
×
4),
lock ace, p2 (black)
7
Two tapping screws
(M1.7
×
3.5)
1
Screw (M1.7
×
4),
lock ace, p2 (black)
Screw (M1.7
×
4), lock ace, p2 (black)
Tapping screw (M1.7
×
3.5)
q;
Water packing
Click on the first or last page to see other DCR-DVD200 / DCR-DVD200E / DCR-DVD300 (serv.man2) service manuals if exist.