Sony DCR-DVD200 / DCR-DVD200E / DCR-DVD300 Service Manual ▷ View online
SERVICE MANUAL
LEVEL
3
Link
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
DISASSEMBLY
SCHEMATIC DIAGRAMS
PRINTED WIRING BOARDS
REPAIR PARTS LIST
DISASSEMBLY
Link
Revision History
Revision History
Ver 1.2 2005. 06
The information that is not described in this Service Manual is described
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
in the LEVEL 2 Service Manual.
When repairing, use this manual together with LEVEL 2 Service Manual.
Contents of LEVEL 2 Service Manual
1. SERVICE NOTE
2. DISASSEMBLY
3. BLOCK DIAGRAMS
4. PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
5. REPAIR PARTS LIST
6. ADJUSTMENTS
OVERALL
POWER
CD-429, PD-188, LB-084, MA-420,
CK-127, FB-220 BOARD, CONTROL
SWTICH BLOCK
(KP-CX5500, PS-CX5500),
FP-610, FP-611 FLEXIBLE
CK-127, FB-220 BOARD, CONTROL
SWTICH BLOCK
(KP-CX5500, PS-CX5500),
FP-610, FP-611 FLEXIBLE
EXPLODED VIEWS
ELECTRICAL PARTS LIST
Digital Video Camera Recorder
• For INSTRUCTION MANUAL, refer to SERVICE MANUAL, LEVEL 1 (987627441.pdf).
• Since a service is provided only for the MD-097 BLOCK ASSY (A-7111-651-A) and not for the
• Since a service is provided only for the MD-097 BLOCK ASSY (A-7111-651-A) and not for the
single MD-097 board complete.
• Reference No. search on printed wiring boards is available.
How to use
Acrobat Reader
How to use
Acrobat Reader
US Model
DCR-DVD200/DVD300
Canadian Model
Korea Model
DCR-DVD200
AEP Model
UK Model
East European Model
Hong Kong Model
Australian Model
DCR-DVD200E
E Model
DCR-DVD200/DVD200E
DCR-DVD200/DVD200E/
DVD300
RMT-820
Photo: DCR-DVD300
— 2 —
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
ATTENTION AU COMPOSANT AYANT RAPPORT
À LA SÉCURITÉ!
LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE
0
SUR LES
DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.
DCR-DVD200/DVD200E/DVD300
1.
Check the area of your repair for unsoldered or poorly-soldered
connections. Check the entire board surface for solder splashes
and bridges.
connections. Check the entire board surface for solder splashes
and bridges.
2.
Check the interboard wiring to ensure that no wires are
"pinched" or contact high-wattage resistors.
"pinched" or contact high-wattage resistors.
3.
Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
transistors, that were installed during a previous repair. Point
them out to the customer and recommend their replacement.
4.
Look for parts which, through functioning, show obvious signs
of deterioration. Point them out to the customer and
recommend their replacement.
of deterioration. Point them out to the customer and
recommend their replacement.
5.
Check the B+ voltage to see it is at the values specified.
6.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40°C higher than
• Unleaded solder melts at a temperature about 40°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer.
COVER
COVER
CAUTION :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
WARNING!!
WHEN SERVICING, DO NOT APPROACH THE LASER
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
EXIT WITH THE EYE TOO CLOSELY. IN CASE IT IS
NECESSARY TO CONFIRM LASER BEAM EMISSION,
BE SURE TO OBSERVE FROM A DISTANCE OF MORE
THAN 30 cm FROM THE SURFACE OF THE
OBJECTIVE LENS ON THE OPTICAL PICK-UP BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
hazard.
CAUTION
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
Use of controls or adjustments or performance
procedures other than those specified herein may
result in hazardous radiation exposure.
— 3 —
DCR-DVD200/DVD200E/DVD300
TABLE OF CONTENTS
2.
DISASSEMBLY
2-39. MD-097 BOARD ·························································· 2-30
2-40. DDX-A1000 COMPLETE SECTION-1 ······················· 2-31
2-41. DDX-A1000 COMPLETE SECTION-2
2-40. DDX-A1000 COMPLETE SECTION-1 ······················· 2-31
2-41. DDX-A1000 COMPLETE SECTION-2
(SS-174T BOARD) ······················································· 2-31
2-42. DDX-A1000 COMPLETE SECTION-3
(FP-629 FLEXIBLE BOARD) ······································ 2-32
4.
PRINTED WIRING BOARDS AND
SCHEMATIC DIAGRAMS
SCHEMATIC DIAGRAMS
4-2.
SCHEMATIC DIAGRAMS
• MD-097 (1/7)(RF SKEW SENSOR)
SCHEMATIC DIAGRAM ···························· 4-27
• MD-097 (2/7)(DVD DSP)
SCHEMATIC DIAGRAM ···························· 4-29
• MD-097 (3/7)(MECHA DRIVE)
SCHEMATIC DIAGRAM ···························· 4-31
• MD-097 (4/7)(UCON, FLASH, LATCH)
SCHEMATIC DIAGRAM ···························· 4-33
• MD-097 (5/7)(USB I/F)
SCHEMATIC DIAGRAM ···························· 4-35
• MD-097 (6/7)(CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-37
• MD-097 (7/7)(DC/DC CONVERTER)
SCHEMATIC DIAGRAM ···························· 4-39
• VC-310 (1/18)(A/D CONVERTER,
TIMING GENERATOR, EVR)
SCHEMATIC DIAGRAM ···························· 4-41
• VC-310 (2/18)(CAMERA PROCESS)
SCHEMATIC DIAGRAM ···························· 4-43
• VC-310 (3/18)(LENS DRIVE)
SCHEMATIC DIAGRAM ···························· 4-45
• VC-310 (4/18)(DVD SYSTEM CONTROL)
SCHEMATIC DIAGRAM ···························· 4-47
• VC-310 (5/18)(128M SDRAM, 16M FCRAM)
SCHEMATIC DIAGRAM ···························· 4-49
• VC-310 (6/18)(DVD CODEC)
SCHEMATIC DIAGRAM ···························· 4-51
• VC-310 (7/18)(64M SDRAM)
SCHEMATIC DIAGRAM ···························· 4-53
• VC-310 (8/18)(VIDEO IN/OUT)
SCHEMATIC DIAGRAM ···························· 4-55
• VC-310 (9/18)(VIDEO A/D CONVERTER)
SCHEMATIC DIAGRAM ···························· 4-57
• VC-310 (10/18)(EVF DRIVE)
SCHEMATIC DIAGRAM ···························· 4-59
• VC-310 (11/18)(CAMERA CONTROL)
SCHEMATIC DIAGRAM ···························· 4-61
• VC-310 (12/18)(HI CONTROL)
SCHEMATIC DIAGRAM ···························· 4-63
• VC-310 (13/18)(HI/DIGITAL STILL CONTROL)
SCHEMATIC DIAGRAM ···························· 4-65
• VC-310 (14/18)(32M FLASH MEMORY)
SCHEMATIC DIAGRAM ···························· 4-67
• VC-310 (15/18)(AUDIO I/O)
SCHEMATIC DIAGRAM ···························· 4-69
• VC-310 (16/18)(MIC AMP, PITCH/YAW SENSOR AMP)
SCHEMATIC DIAGRAM ···························· 4-71
• VC-310 (17/18)(CONNECTOR)
SCHEMATIC DIAGRAM ···························· 4-73
• VC-310 (18/18)(DD CONNECTOR)
SCHEMATIC DIAG2RAM ·························· 4-75
• SS-174T (TSB SHOCK SENSOR)
SCHEMATIC DIAG2RAM ·························· 4-77
4-3.
PRINTED WIRING BOARDS
• MD-097 (RF SKEW SENSOR, DVD DSP,
MECHA DRIVE, UCON, FLASH, LATCH, USB I/F,
CONNECTOR, DC/DC CONVERTER)
CONNECTOR, DC/DC CONVERTER)
PRINTED WIRING BOARD ······················· 4-97
• VC-310 (A/D CONVERTER, TIMING GENERATOR,
EVR, CAMERA PROCESS, LENS DRIVE,
DVD SYSTEM CONTROL, 128M SDRAM,
16M FCRAM, DVD CODEC, 64M SDRAM,
VIDEO IN/OUT, VIDEO A/D CONVERTER,
EVF DRIVE, CAMERA CONTROL, HI CONTROL,
HI/DIGITAL STILL CONTROL, 32M FLASH MEMORY,
AUDIO I/O, MIC AMP, PITCH/YAW SENSOR AMP,
CONNECTOR, DD CONNECTOR)
DVD SYSTEM CONTROL, 128M SDRAM,
16M FCRAM, DVD CODEC, 64M SDRAM,
VIDEO IN/OUT, VIDEO A/D CONVERTER,
EVF DRIVE, CAMERA CONTROL, HI CONTROL,
HI/DIGITAL STILL CONTROL, 32M FLASH MEMORY,
AUDIO I/O, MIC AMP, PITCH/YAW SENSOR AMP,
CONNECTOR, DD CONNECTOR)
PRINTED WIRING BOARD ····················· 4-101
• SS-174T (TSB SHOCK SENSOR)
PRINTED WIRING BOARD ····················· 4-105
4-4.
WAVEFORMS ···························································· 4-109
4-5.
MOUNTED PARTS LOCATION ······························· 4-113
5.
REPAIR PARTS LIST
5-1.
EXPLODED VIEWS ···················································· 5-13
5-1-11. MD-097 BLOCK ASSEMBLY ·································· 5-13
5-1-12. DDX-A1000 COMPLETE SECTION ························ 5-14
5-2.
5-1-12. DDX-A1000 COMPLETE SECTION ························ 5-14
5-2.
ELECTRICAL PARTS LIST ········································ 5-18
DCR-DVD200
US/CND/E/KR
NTSC
DCR-DVD200E
AEP/UK/EE/
E/HK/AUS
PAL
2.5 INCH
• Abbreviation
CND : Canadian model
EE
EE
: East European model
HK
: Hong Kong model
AUS : Australian model
KR
KR
: Korea model
Table for difference of function
Model
Destination
Color System
LCD size
DCR-DVD300
US
NTSC
3.5 INCH
Remark
NTSC: X1602 is 66MHz
PAL: X1602 is 54MHz
PAL: X1602 is 54MHz
SECTION 2
DISASSEMBLY
DCR-DVD200/DVD200E/DVD300
COVER
COVER