Sony DCR-DVD150E / DCR-DVD450E / DCR-DVD650 / DCR-DVD650E / DCR-DVD850 / DCR-DVD850E (serv.man2) Service Manual ▷ View online
HELP
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
DVD650E/DVD850/DVD850E_L2
THE METHOD OF ATTACHMENT OF FP-1031 FLEXIBLE BOARD
HELP03
FP-1031
Flexible
board
Flexible
board
Hinge Cover (M)
Hinge Cover (C)
2
Install FP-1031 flexible board
in the Hinge Cover (M).
in the Hinge Cover (M).
3
Install the
Hinge Cover (C).
Adhesive tape
Claw
Claws
Hinge Assy
1
Fold dotted line parts of the FP-1031 flexible board
as shown in figure.
as shown in figure.
Valley fold
Mountain
fold
fold
Stick it together in the adhesive tape
while bending the FP-1031 flexible board.
while bending the FP-1031 flexible board.
Mountain fold
Valley fold
Adhesive tape
Adhesive tape
HELP
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
DVD650E/DVD850/DVD850E_L2
ROUTING THE SPEAKER HARNESS
HELP04
Speaker Harness
Claw
PRECAUTION WHEN INSTALLING THE CABINET L ASSY FOR SERVICE
HELP05
Cabinet D
block
block
D lid block
Cabinet L assy for service
When the eject block is installed on the cabinet L assy
for service, a discrepancy could be made between the
cabinet D block and the D lid block, and as a result,
the D lid may not to be closed.
In case of such discrepancy, loosen the screws on the
hinge to eliminate the discrepancy of the D lid block,
and then tighten the screws.
for service, a discrepancy could be made between the
cabinet D block and the D lid block, and as a result,
the D lid may not to be closed.
In case of such discrepancy, loosen the screws on the
hinge to eliminate the discrepancy of the D lid block,
and then tighten the screws.
Screws
Motor Unit
(Geared Motor)
(M903)
(Geared Motor)
(M903)
Eject block
FP-569 flexible
complete board
complete board
HELP
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
DVD650E/DVD850/DVD850E_L2
FP-569 FLEXIBLE BOARD PROCESSING
HELP06
Bosses
Boss
Motor Unit
(Geared Motor)
(M903)
(Geared Motor)
(M903)
FP-569 Flexible Board
MECHANISM DECK FLEXIBLE BOARD PROCESSING
HELP07
Hooks
Hole
Mechanism Deck Flexible Board
Mechanism Deck Flexible Board
MD Frame
HELP
DCR-DVD150E/DVD450E/DVD650/
DVD650E/DVD850/DVD850E_L2
DVD650E/DVD850/DVD850E_L2
Flexible Guard Sheet (299)
Connector
(CN3102)
(CN3102)
VC-552 Board
FLEXIBLE GUARD SHEET (299) PUTTING POSITION
HELP08
HOW TO DISTINGUISH THE SIDE OF OPTICAL FILTER BLOCK FACING TO LENS DEVICE
The one side of the Optical Filter Block has treated with IR cut coating.
Mount the Optical Filter Block facing the IR cut coated side to the lens device.
Distinguish the IR cut coated side from the other by applying the fluorescent light to
the Optical Filter Block in the dark place (cut off the outside light).
Mount the Optical Filter Block facing the IR cut coated side to the lens device.
Distinguish the IR cut coated side from the other by applying the fluorescent light to
the Optical Filter Block in the dark place (cut off the outside light).
• IR cut coating surface
The red coating is reflected.
The red coating is reflected.
• The other surface
The red coating is
not reflected.
The red coating is
not reflected.
• Side view
The red belt is
seen.
The red belt is
seen.
Lens Device side
Lens Device side
Hold it with tweezers or the like.
Optical Filter
Block
Block
[IR Cut Coated Side]
[The Other Side]
HELP09
Click on the first or last page to see other DCR-DVD150E / DCR-DVD450E / DCR-DVD650 / DCR-DVD650E / DCR-DVD850 / DCR-DVD850E (serv.man2) service manuals if exist.