Sony DCR-DVD101 / DCR-DVD101E / DCR-DVD91E (serv.man4) Service Manual ▷ View online
6-43
DCR-DVD91E/DVD101/DVD101E
7. Switch check (4)
Page 2
Address 60 to 65, 67
Note:
The data of page: 0, address: 10 must be “00”.
Using method:
1)
1)
Select page: 2, address: 60 to 65, 67.
2)
By discriminating the display data, the pressed key can be discriminated.
Address
60
(KEY AD0)
(IC3103 tl )
61
(KEY AD1)
(IC3103 y; )
62
(KEY AD2)
(IC3103 ya )
63
(KEY AD3)
(IC3103 yg )
64
(KEY AD4)
(IC3103 yh )
65
(KEY AD5)
(IC3103 yj )
67
(KEY AD7)
(IC3103 yl )
00
(00 to 0C)
START/STOP
(PS8700 block)
(PS8700 block)
PHOTO
(PHOTO REC)
(PS8700 block)
STOP
(SH8700 block)
(S108)
REC
(SH8700 block)
(S100, 101)
ENTER
(JS-030 board)
(S5304)
COLOR SLOW S/
SUPER NS
(PS8700 block)
REC
START/STOP
(BL8700 block)
(S001)
Data
19
(0D to 24)
PAUSE
(SH8700 block)
(S109)
SETUP
(SH8700 block)
(S102)
RIGHT
(JS-030 board)
(S5304)
PANEL OPEN
(FP-884 flexible)
(S002)
LCD
BACKLIGHT
(BL8700 block)
(S002)
32
(25 to 3F)
PLAY/REVIEW
(SH8700 block)
(S110)
EXPOSURE
(SH8700 block)
(S103)
UP
(JS-030 board)
(S5304)
PANEL
REVERSE
(FP-890 flexible)
(S001)
4E
(40 to 5D)
PREVIEW
(SH8700 block)
(S111)
FOCUS
(SH8700 block)
(S104)
DOWN
(JS-030 board)
(S5304)
6F
(5E to 81)
NEXT
(SH8700 block)
(S112)
FADER
(SH8700 block)
(S105)
LEFT
(JS-030 board)
(S5304)
96
(82 to AA)
EDIT
(SH8700 block)
(S113)
VOL-
(SH8700 block)
(S106)
VISUAL INDEX
(JS-030 board)
(JS-030 board)
(S5303)
C1
(AB to D7)
FINALIZE
(SH8700 block)
(S1114)
VOL+
(SH8700 block)
(S107)
BACK LIGHT
(JS-030 board)
(JS-030 board)
(S5301)
8. Record of Use check
Page 7
Address A4 to AC
Address
A4
A5
A6
A7
A8
A9
AA
AB
AC
Function
User initial power
Year
on date
Month
(BCD code)
Day
Final condensation
Year
occurrence data
Month
(BCD code)
Day
Fault of writing to or erasing
Year
the flash memory (VC-353
Month
board IC3401 )(BCD code)
Day
Remarks
After setting the clock, set the date of power on next
Note1:
This data will be kept even if the lithium battery (FP-884 flexible BT5201 of the cabinet (R) assembly) is removed.
Note2:
The data of page: 0, address: 10 must be “00”.
EB
(D8 to FF)
No key input
No key input
No key input
No key input
PANEL
NORMAL
PANEL CLOSE
(FP-884 flexible)
(FP-884 flexible)
(S002)
PANEL
NORMAL
(FP-890 flexible)
(S001)
Using method:
1)
1)
The record of use data is displayed at addresses: A4 to AC.
6-44
DCR-DVD91E/DVD101/DVD101E
9. Record of Self-diagnosis check
Page 7
Address B0 to C6
Note1:
This data will be kept even if the lithium battery (FP-884 flexible
board BT5201 of the cabinet (R) assembly) is removed.
board BT5201 of the cabinet (R) assembly) is removed.
Note2:
The data of page: 0, address: 10 must be “00”.
Address
Self-diagnosis code
B0
“Repaired by” code (Occurred 1st time) *1
B1
“Block function” code (Occurred 1st time)
B2
“Detailed” code (Occurred 1st time)
B4
“Repaired by” code (Occurred 2nd time) *1
B5
“Block function” code (Occurred 2nd time)
B6
“Detailed” code (Occurred 2nd time)
B8
“Repaired by” code (Occurred 3rd time) *1
B9
“Block function” code (Occurred 3rd time)
BA
“Detailed” code (Occurred 3rd time)
BC
“Repaired by” code (Occurred 4th time) *1
BD
“Block function” code (Occurred 4th time)
BE
“Detailed” code (Occurred 4th time)
C0
“Repaired by” code (Occurred 5th time) *1
C1
“Block function” code (Occurred 5th time)
C2
“Detailed” code (Occurred 5th time)
C4
“Repaired by” code (Occurred the last time) *1
C5
“Block function” code (Occurred the last time)
C6
“Detailed” code (Occurred the last time)
*1: “01”
t “C”, “03” t “E”
Using method:
1)
1)
The past self-diagnosis codes are displayed at addresses: BC
to C6.
Refer to “SELF-DIAGNOSIS FUNCTION” for detail of the
self-diagnosis code except for the code being written in the
following table.
to C6.
Refer to “SELF-DIAGNOSIS FUNCTION” for detail of the
self-diagnosis code except for the code being written in the
following table.
Repaired by:
E
E
Self-diagnosis Code
Block
Function
Function
20
94
Detailed
Code
Code
00
00
Symptom/State
Data on A page or D page are
rewritten.
rewritten.
Fault of writing to or erasing the
flash memory
flash memory
Correction
Make data on A page and D
page correct value.
page correct value.
Inspect the flash memory
(VC-353 board IC3401)
(VC-353 board IC3401)
Note:
When the fault of writing to or erasing the flash memory (E:94:00) is displayed.
After repair, clear the error information in the following method.
1) Select page:0, address:01, and set data:01.
2) Select page:7, address:00, and set data:EE.
3) Select page:7, address:01, set data:EE and press the PAUSE button.
4) Check that the data of page:7, address:02, changes from “00” to “01”.
5) Select page:0, address:01, and set data:00.
After repair, clear the error information in the following method.
1) Select page:0, address:01, and set data:01.
2) Select page:7, address:00, and set data:EE.
3) Select page:7, address:01, set data:EE and press the PAUSE button.
4) Check that the data of page:7, address:02, changes from “00” to “01”.
5) Select page:0, address:01, and set data:00.
✂
Take a copy of OPTICAL AXIS
FRAME with a clear sheet for use.
FRAME with a clear sheet for use.
〈
OPTICAL AXIS FRAME
〉
DCR-DVD91E/DVD101/DVD101E
6-46
✂
✂
Take a copy of CAMERA COLOR
REPRODUCTION FRAME with
a clear sheet for use.
REPRODUCTION FRAME with
a clear sheet for use.
〈
FOR CAMERA COLOR REPRODUCTION ADJUSTMENT
〉
DCR-DVD101
For NTSC model
For PAL model
DCR-DVD91E/DVD101E
DCR-DVD91E/DVD101/DVD101E
6-47E
Click on the first or last page to see other DCR-DVD101 / DCR-DVD101E / DCR-DVD91E (serv.man4) service manuals if exist.