Sony CCD-TRV107E / CCD-TRV108E / CCD-TRV208E / CCD-TRV408E Service Manual ▷ View online
2-4
CCD-TRV107E/TRV108E/TRV208E/TRV408E
2-3. VF-150, LB-073 BOARDS
B
A
1
Raise the EVF in the
A
direction and
slide it in the
B
direction.
2
Two tapping screws
(B2
×
5)
3
EVF cabinet rear assembly
5
EVF cabinet upper
6
Two claws
9
Two claws
q;
Lamp guide
qa
LB-073 board
qs
VF-150 board
LB-073 board
VF-150 board
VF lens (B) assembly
7
VF lens (B) assembly
4
Claw
8
Caution
Before disengaging the 2 claws in step
7
, hold
the EVF lens facing downward and then disengage
the 2 claws very slowly and carefully so that the
internal 2 plastic sheets must not drop. Keep
them in place with an appropriate piece of sheet so
that hey do not drop out of their positions.
the 2 claws very slowly and carefully so that the
internal 2 plastic sheets must not drop. Keep
them in place with an appropriate piece of sheet so
that hey do not drop out of their positions.
[VF-150, LB-073 BOARDS SERVICE POSITION]
Adjustment remote
commander (RM-95)
commander (RM-95)
Info lithium battery
(L series)
(L series)
CPC-jig for SB
(J-6082-539-A)
(J-6082-539-A)
AC IN
AC power
adaptor
adaptor
2-5
CCD-TRV107E/TRV108E/TRV208E/TRV408E
2-4. FRONT PANEL SECTION (SI-033 BOARD)
3
MI screw
(M2
×
4) (H)
1
Open the jack cover
2
Two MI screws
(M2
×
4) (H)
4
Two MI screws
(M2
×
4) (H)
5
Two claws
6
Front panel section
Front panel section
SI-033 board
Adjustment remote
commander (RM-95)
commander (RM-95)
Info lithium battery
(L series)
(L series)
CPC-jig for SB
(J-6082-539-A)
(J-6082-539-A)
AC IN
AC power
adaptor
adaptor
[SI-033 BOARD SERVICE POSITION]
Remove it while taking
care as the FP-418 flexible
cable is connected.
care as the FP-418 flexible
cable is connected.
2-6
CCD-TRV107E/TRV108E/TRV208E/TRV408E
2-5. CABINET (L) SECTION
B
A
2
Two MI screws
(M2
×
4) (H)
1
5
Two MI screws
(M2
×
4) (H)
7
Two MI screws
(M2
×
4) (H)
Mechanism deck
6
MI screw
(M2
×
4) (H)
8
Cabinet (L) section
3
Two claws
4
Cassette lid assembly
[MECHANISM DECK SERVICE POSITION]
Note: Use the parts only which can be removed easily from outside of the mechanism deck.
AC power
adaptor
adaptor
AC IN
Press the cassette compartment
in the direction of the arrow
in the direction of the arrow
A
to move it up in the direction of
the arrow
the arrow
B
.
• How to move up the cassette
compartment manually
compartment manually
Adjustment remote
commander (RM-95)
commander (RM-95)
Info lithium battery
(L series)
(L series)
CPC-jig for SB
(J-6082-539-A)
(J-6082-539-A)
2-7
CCD-TRV107E/TRV108E/TRV208E/TRV408E
2-6. CABINET (R) SECTION
1
MI screw
(M2
×
4) (H)
2
MI screw
(M2
×
4) (H)
3
Three MI screws
(M2
×
4) (H)
4
Control switch block
(CF-2000) (22P)
5
Harness (PD-115)
(20P)
6
Cabinet (R) section
2-7. EVF SECTION
3
MI screw
(M2
×
4) (H)
4
EVF section
1
FP-401 flexible board (20P)
2
Three tapping
screws (B2
×
5)
Click on the first or last page to see other CCD-TRV107E / CCD-TRV108E / CCD-TRV208E / CCD-TRV408E service manuals if exist.