Sony CCD-TRV107E / CCD-TRV108E / CCD-TRV208E / CCD-TRV408E Service Manual ▷ View online
5-2
CCD-TRV107E/TRV108E/TRV208E/TRV408E
1.
Adjusting items when replacing main parts and boards.
When replacing main parts, adjust the items indicated by z in the following table.
Replaced parts
Block replacement
Parts replacement
z
z
z
z
z
z
z
z
z
z
z
z
z z
z
z
z
z
z
z z
z
z
z
z z
z
z
z
z
z
z
z
z z
z z
z
z
z z z
Lens de
vice
V
ideo light *2
LCD block
ND901 (Fluorescent tube)
LCD block
LCD901 (LCD panel)
EVF block
LCD903 (LCD panel)
Mechanism deck *1
Mechanism deck
M901 (Drum assy
.) *1
Mechanism deck
M902 (Capstan motor)
CD-354 board
IC2191 (CCD imager)
VC-272 board
IC271, X271 (T
iming generator)
VC-272 board
IC272 (S/H,
A
GC)
VC-272 board
IC151 (Camera, video process)
VC-272 board
IC101 (REC/PB
AMP)
VC-272 board
IC2301 (V
ideo out)
VC-272 board
IC601 (EVR)
VC-272 board
IC351 (Audio process)
SI-033 board
SE750, 751(PITCH,Y
A
W
sensor) *3
PD-156 board
IC5501 (RGB dri
v
er (LCD))
PD-156 board
IC5502 (T
iming generator (LCD))
VF-150 board
IC2001 (RGB dri
v
er (EVF))
VF-150 board
IC2002 (T
iming generator (EVF))
LB-073 board
D7702 (Back light LED (EVF))
Adjustment
Section
Section
Initialization of D,
E, F, 7 page data
Camera
EVF
LCD
Servo
Video
Audio
Mechanism
Adjustment
Initialization of D, E, F, 7 page data
Modification of D, E, F, 7 page data
HALL adj.
Flange back adj.
Color reproduction adj.
AWB & LV standard data input
Auto white balance adj.
Steady shot check *3
RGB AMP adj.
Contrast adj.
VCO adj.
RGB AMP adj.
Contrast adj.
COM-AMP adj.
V-COM adj.
White balance adj.
CAP FG offsett adj.
Switching position adj.
28MHz origin oscillation adj.
AFC fo adj.
Y OUT level adj.
C OUT level adj.
REC Y current adj.
REC C/AFM current adj.
1.5MHz deviation adj.
BPF fo adj.
Tape path adj.
Table. 5-1-1 (1).
5-3
CCD-TRV107E/TRV108E/TRV208E/TRV408E
VC-272 board
(COMPLETE)
SI-033 board
(COMPLETE)
PD-156 board
(COMPLETE)
VF-150 board
(COMPLETE)
VC-272 board
IC401
EEPR
OM
Supporting
RadarWRadarW
RadarWRadarW
RadarW
Board
replacement
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
*1: When replacing the drum assy. or mechanism
deck, reset the data of page: 2, address: A2 to
A4 to “00”. (Refer to “Record of Use check”
of “5-4. SERVICE MODE”)
A4 to “00”. (Refer to “Record of Use check”
of “5-4. SERVICE MODE”)
*2: When replacing the video light, reset the data
of page:2, address: E0 to E2 to “00”.
*3: Steady shot model (CCD-TRV408E)
Adjustment
Section
Section
Initialization of D,
E, F, 7 page data
Camera
EVF
LCD
Servo
Video
Audio
Mechanism
Adjustment
Initialization of D, E, F, 7 page data
Modification of D, E, F, 7 page data
HALL adj.
Flange back adj.
Color reproduction adj.
AWB & LV standard data input
Auto white balance adj.
Steady shot check *3
RGB AMP adj.
Contrast adj.
VCO adj.
RGB AMP adj.
Contrast adj.
COM-AMP adj.
V-COM adj.
White balance adj.
CAP FG offsett adj.
Switching position adj.
28MHz origin oscillation adj.
AFC fo adj.
Y OUT level adj.
C OUT level adj.
REC Y current adj.
REC C/AFM current adj.
1.5MHz deviation adj.
BPF fo adj.
Tape path adj.
Table. 5-1-1 (2).
5-4
CCD-TRV107E/TRV108E/TRV208E/TRV408E
Ref. No.
J-1
J-2
J-3
J-4
J-5
J-6
J-7
J-8
J-9
J-10
J-11
Name
Filter for color temperature correction (C14)
ND filter 1.0
ND filter 0.4
ND filter 0.1
Pattern box PTB-450
Color chart for pattern box
Adjustment remote commander (RM-95 upgraded)
(Note)
(Note)
Siemens star chart
Clear chart for pattern box
Multi CPC jig
CPC jig for SB
Minipattern box
Camera base
Parts Code
J-6080-058-A
J-6080-808-A
J-6080-806-A
J-6080-807-A
J-6082-200-A
J-6020-250-A
J-6082-053-B
J-6080-875-A
J-6080-621-A
J-6082-311-A
J-6082-539-A
J-6082-353-B
J-6082-384-A
Usage
Auto white balance adjustment/check
White balance adjustment/check
White balance adjustment/check
White balance check
White balance check
White balance check
For checking the flange back
For adjusting the LCD block
For connecting the adjustment remote commander
For adjusting the flange back
For adjusting the flange back
5-1. CAMERA SECTION ADJUSTMENT
1-1.
PREPARATIONS BEFORE ADJUSTMENT (CAMERA SECTION)
1-1-1.
List of Service Tools
• Oscilloscope
• Color monitor
• Vectorscope
• Regulated power supply
• Digital voltmeter
Note:
If the micro processor IC in the adjustment remote commander is
not the new micro processor (UPD7503G-C56-12), the pages cannot
be switched. In this case, replace with the new micro processor
(8-759-148-35).
not the new micro processor (UPD7503G-C56-12), the pages cannot
be switched. In this case, replace with the new micro processor
(8-759-148-35).
J-1
J-2
J-6
J-3
J-7
J-8
J-4
J-5
Fig. 5-1-1.
J-9
J-10
J-11
5-5
CCD-TRV107E/TRV108E/TRV208E/TRV408E
Fig. 5-1-2.
1-1-2.
Preparations
Note1:
For details of how remove the cabinet and boards, refer to “2.
DISASSEMBLY”.
DISASSEMBLY”.
Note2:
When performing only the adjustments, the lens block and boards
need not be disassembled.
need not be disassembled.
1)
Connect the equipment for adjustments according to Fig. 5-1-4.
2)
Connect the adjustment remote commander to CN713 of VC-
272 board via CPC jig for SB (J-6082-539-A). To operate the
adjustment remote commander, connect the AC power adapter
to the DC IN jack of CPC jig for SB, or connect the L series
Info-LITHIUM battery to the battery terminal of CPC jig for
SB. (Fig. 5-1-3.)
272 board via CPC jig for SB (J-6082-539-A). To operate the
adjustment remote commander, connect the AC power adapter
to the DC IN jack of CPC jig for SB, or connect the L series
Info-LITHIUM battery to the battery terminal of CPC jig for
SB. (Fig. 5-1-3.)
3)
The front panel block (SI-033 board, microphone unit, video
light) need not be assembled except during the steady shot
operation check.
light) need not be assembled except during the steady shot
operation check.
Note3:
As removing the cabinet (R) (removing the VC-272 board CN709)
means removing the lithium 3V power supply (CF-2000 block
BT001), data such as date, time, user-set menus will be lost. After
completing adjustments, reset these data. If the cabinet (R) has
been removed, the self-diagnosis data, data on history of use (total
drum rotation time etc.) will be lost. Before removing, note down
the self-diagnosis data (data of page: 2, address: B0 to C6) and
data on history use (data of page: 2, address: A2 to AA and E0 to
E2). (Refer to “5-4. Service Mode” for the self-diagnosis data and
data on the history use.)
means removing the lithium 3V power supply (CF-2000 block
BT001), data such as date, time, user-set menus will be lost. After
completing adjustments, reset these data. If the cabinet (R) has
been removed, the self-diagnosis data, data on history of use (total
drum rotation time etc.) will be lost. Before removing, note down
the self-diagnosis data (data of page: 2, address: B0 to C6) and
data on history use (data of page: 2, address: A2 to AA and E0 to
E2). (Refer to “5-4. Service Mode” for the self-diagnosis data and
data on the history use.)
Note4:
Setting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and press the PAUSE
button.
The above procedure will enable the camera power to be turned
on with the SS-2000 block removed. After completing adjustments,
be sure to exit the “Forced Camera Power ON Mode”.
on with the SS-2000 block removed. After completing adjustments,
be sure to exit the “Forced Camera Power ON Mode”.
Note5:
Exiting the “Forced Camera Power ON” Mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press the PAUSE
button.
3) Select page: 0, address: 01, and set data: 00.
Front of the lens
1.5 m
Pattern box
Fig. 5-1-3.
CPC connector
CPC jig
Remove the CPC lid
CN713
Conductor side
16
1
Click on the first or last page to see other CCD-TRV107E / CCD-TRV108E / CCD-TRV208E / CCD-TRV408E service manuals if exist.