Sony CCD-TRV107 / CCD-TRV108 / CCD-TRV308 / CCD-TRV408 / CCD-TRV608 Service Manual ▷ View online
2-12
CCD-TRV107/TRV108/TRV308/TRV408/TRV608
VC-272
Monitor TV
Video
Audio
A/V out jack
FP-397 flexible board
Control switch block (FK-2000) (12P)
Control switch block
(CF-2000) (22P)
(CF-2000) (22P)
Mechanism deck
When you operate the zoom,
connect the FK-2000 block to
CN710 of VC-272 board.
connect the FK-2000 block to
CN710 of VC-272 board.
[SERVICE POSITION TO CHECK THE CAMERA SECTION]
Battery terminal board
VC-272 board
CD-354 board
AC IN
AC power
adaptor
adaptor
Adjustment remote
commander (RM-95)
commander (RM-95)
Info lithium battery
(L series)
(L series)
Connection to Check the Camera Section
To check the camera section, set the camera to the “Forced camera power ON” mode.
Note : If the machine malfunctions (the operating mode changes by itself), connect the FK-2000 block, CF-2000 block.
Setting the “Forced Camera Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 01, and
2) Select page: D, address: 10, set data: 01, and
press the PAUSE button of the adjustment remote
commander.
commander.
Exiting the “Forced Camera Power ON” mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
2) Select page: D, address: 10, set data: 00, and press
the PAUSE button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
FP-400 flexible board (14P)
Flexible board
(from lens block)(24P)
(from lens block)(24P)
Lens section
I/F unit for LANC control
(J-6082-521-A)
(J-6082-521-A)
CPC jig connector
(J-6082-539-A)
(J-6082-539-A)
Ver 1.2 2002. 07
2-13
CCD-TRV107/TRV108/TRV308/TRV408/TRV608
2-13.MECHANISM DECK
2-14.HINGE ASSEMBLY
1
Screw
(M2
×
3),
lock ace, p2
4
Three screws
(M1.7
×
2.5)
5
MD frame (A)
6
Mechanism deck
3
Control switch block
(FK-2000)
2
Claw
A
A
1
Tapping
screw (B2
×
5)
3
Four tapping
screws (B2
×
5)
4
2
Hinge blind
5
Four claws
8
Harness
clamp
9
Harness
(PD-115)
q;
Screw
(M1.7
×
2.5)
qa
Control switch block
(PR-10000)
6
Hinge
cover C
7
Hinge cover M
qs
Hinge assembly
A
A = B
Be sure that each harness
does not go across the ribs
of the guide.
does not go across the ribs
of the guide.
B
Attach the harness clamp
so that the black harness (6P)
comes to the forefront.
so that the black harness (6P)
comes to the forefront.
HARNESS PROCESSING
OF THE HINGE ASSEMBLY
OF THE HINGE ASSEMBLY
(Remove the LCD unit reffering to section 2-2 before starting disassembly.)
2-14
CCD-TRV107/TRV108/TRV308/TRV408/TRV608
2-15.CIRCUIT BOARDS LOCATION
SI-033
(STEADY SHOT, MIC)
(STEADY SHOT, MIC)
CD-354 (CCD IMAGER)
PD-156
RGB DRIVE, TIMING GENERATOR,
LCD DRIVE, BACK LIGHT DRIVE
RGB DRIVE, TIMING GENERATOR,
LCD DRIVE, BACK LIGHT DRIVE
VC-272
(CAMERA, VIDEO, AUDIO, SERVO, HI/MODE CONTROL, D-D CONVERTER)
(CAMERA, VIDEO, AUDIO, SERVO, HI/MODE CONTROL, D-D CONVERTER)
LIQUID CRYSTAL
INDICATOR MODULE (TRV108)
(B/W EVF BLOCK)
INDICATOR MODULE (TRV108)
(B/W EVF BLOCK)
LB-073 (TRV107/TRV308/TRV408/TRV608)
(BACK LIGHT)
(BACK LIGHT)
VF-150 (TRV107/TRV308/TRV408/TRV608)
(RGB DRIVE/TG)
(RGB DRIVE/TG)
2-15E
CCD-TRV107/TRV108/TRV308/TRV408/TRV608
The flexible boards contained in the mechanism deck are not shown.
2-16.FLEXIBLE BOARDS LOCATION
FP-401 (TRV107/TRV308/TRV408/TRV608)
CONTROL SWITCH BLOCK
(FK-2000)
(FK-2000)
CONTROL SWITCH BLOCK
(CF-2000)
(CF-2000)
CONTROL SWITCH BLOCK
(SS-2000)
(SS-2000)
CONTROL SWITCH BLOCK
(PR-10000)
(PR-10000)
FP-399 (TRV608)
FP-397
FP-402 (TRV108)
FP-400
FP-394
FP-418
Click on the first or last page to see other CCD-TRV107 / CCD-TRV108 / CCD-TRV308 / CCD-TRV408 / CCD-TRV608 service manuals if exist.