Sony DVP-NS955V Service Manual ▷ View online
1-24
DVP-NS955V
97
Additional Information
Specifications
System
Laser: Semiconductor laser
Signal format system: PAL/(NTSC)
Signal format system: PAL/(NTSC)
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (44 kHz: –2 dB
±1 dB)/Super Audio CD: 2 Hz to 100
kHz (50 kHz: –3 dB ±1 dB)/CD: 2 Hz to
20 kHz (±0.5 dB)
±1 dB)/Super Audio CD: 2 Hz to 100
kHz (50 kHz: –3 dB ±1 dB)/CD: 2 Hz to
20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(LINE OUT L/R (AUDIO) jacks only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO/Super Audio
Dynamic range: DVD VIDEO/Super Audio
CD: 103 dB/CD: 99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
Outputs
(Jack name: Jack type/Output level/Load
impedance)
LINE OUT (AUDIO): Phono jack/2 Vrms/
10 kilohms
5.1CH OUTPUT: Phono jack/2 Vrms/
10 kilohms
DIGITAL OUT (OPTICAL): Optical
output jack/–18 dBm (wave length
660 nm)
660 nm)
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
LINE OUT (VIDEO): Phono jack/1.0 Vp-p/
75 ohms
S VIDEO OUT: 4-pin mini DIN/Y:
1.0 Vp-p, C: 0.3 Vp-p (PAL), 0.286 Vp-p
(NTSC)/75 ohms
(NTSC)/75 ohms
COMPONENT VIDEO OUT (Y, P
B
/C
B
,
P
R
/C
R
): Phono jack/Y: 1.0 Vp-p, P
B
/C
B
,
P
R
/ C
R
: 0.7 Vp-p/75 ohms
General
Power requirements:
220 – 240 V AC, 50/60 Hz
Power consumption:
DVP-NS955V: 14 W
DVP-LS785V: 13 W
DVP-LS785V: 13 W
Dimensions (approx.):
DVP-NS955V: 430 × 55.5 × 237 mm
DVP-LS785V: 430 × 55.5 × 245 mm
(width/height/depth) incl. projecting
parts
DVP-LS785V: 430 × 55.5 × 245 mm
(width/height/depth) incl. projecting
parts
Mass (approx.):
DVP-NS955V: 2.3 kg
DVP-LS785V: 2.1 kg
DVP-LS785V: 2.1 kg
Operating temperature: 5 °C to 35 °C
Operating humidity: 25 % to 80 %
Operating humidity: 25 % to 80 %
Supplied accessories
See page 16.
Specifications and design are subject to
change without notice.
change without notice.
1-24E
2-1
DVP-NS955V
Note: Follow the disassembly procedure in the numerical order given.
2-1. UPPER CASE
SECTION 2
DISASSEMBLY
2-2. FRONT PANEL ASSEMBLY
5
1
Screw, Tapping
Screw, Tapping
6
Tray cover
3
Three screws
(Screw +BV3 (3-CR))
4
Chassis back
2
4
Front panel assembly
3
Two claws
2
Two claws
1
Claw
1
Claw
a
b
c
b
a
c
2-2
DVP-NS955V
2-3. LOADING ASSEMBLY
1
Three screws
SUMITITE (B3), +BV
2
Loading assembly
FMO-013 flexible board (CN101, 24P)
FMS-002 flexible
cable (CN202, 5P)
MD-105 harness (CN201, 6P)
a
a
3
5
4
2-3
DVP-NS955V
2-4. OPTICAL DEVICE (KHM-310BAA)
3
FMO-013 flexible board
(CN101, 24P)
(CN101, 24P)
4
MD-105 flexible board (CN201, 6P)
1
Four insulator screws
2
Four insulator
2
Four insulator
5
Optical device (KHM-310BAA)
Caution Point on the Laser Diode:
Laser Diode in the optical Device is very sensitive to Surge
Current or ElectroStatic Discharge (ESD):
Laser Diode in the optical Device is very sensitive to Surge
Current or ElectroStatic Discharge (ESD):
After take-out FMO-013 Flexible cable from CN101 of
MB-117 board immediately ground FMO-013 Flexible cable
pattern using short clip. Metal paper clip can be used as
short clip.
MB-117 board immediately ground FMO-013 Flexible cable
pattern using short clip. Metal paper clip can be used as
short clip.
Click on the first or last page to see other DVP-NS955V service manuals if exist.