Sony DVP-NS955V Service Manual ▷ View online
1-12
DVP-NS955V
49
Viewing Information About the Dis
c
Viewing Information About the
Disc
Disc
Checking the Playing
Time and Remaining
Time
Time and Remaining
Time
You can check the playing time and
remaining time of the current title, chapter, or
track. Also, you can check the DVD/Super
Audio CD/CD text, track name (MP3 audio),
or file name (DivX video) recorded on the
disc.
remaining time of the current title, chapter, or
track. Also, you can check the DVD/Super
Audio CD/CD text, track name (MP3 audio),
or file name (DivX video) recorded on the
disc.
1
Make sure that the TV/DVD switch
is set to DVD. Press TIME/TEXT
during playback.
during playback.
The following display appears.
2
Press TIME/TEXT repeatedly to
change the time information.
change the time information.
The available time information depends
upon the type of disc you are playing.
upon the type of disc you are playing.
◆ When playing a DVD VIDEO or DVD-
RW
• T *:*:* (hours: minutes: seconds)
RW
• T *:*:* (hours: minutes: seconds)
Playing time of the current title
• T–*:*:*
Remaining time of the current title
• C *:*:*
Playing time of the current chapter
• C–*:*:*
Remaining time of the current chapter
◆ When playing a VIDEO CD or Super
VCD (with PBC functions)
• *:* (minutes: seconds)
VCD (with PBC functions)
• *:* (minutes: seconds)
Playing time of the current scene
◆ When playing a VIDEO CD (without
PBC functions), Super Audio CD, or CD
• T *:* (minutes: seconds)
PBC functions), Super Audio CD, or CD
• T *:* (minutes: seconds)
Playing time of the current track
• T–*:*
Remaining time of the current track
• D *:*
Playing time of the current disc
• D –*:*
Remaining time of the current disc
◆ When playing a Super VCD (without
PBC functions)
• T *:* (minutes: seconds)
PBC functions)
• T *:* (minutes: seconds)
Playing time of the current track
◆ When playing a DATA CD (MP3 audio)
• T *:* (minutes: seconds)
• T *:* (minutes: seconds)
Playing time of the current track
◆ When playing a DATA CD (DivX video)/
DATA DVD (DivX video)
• *:*:* (hours: minutes: seconds)
DATA DVD (DivX video)
• *:*:* (hours: minutes: seconds)
Playing time of the current file
TIME/TEXT
TV/DVD
switch
switch
T 1:01:57
Time
information
information
,continued
50
Checking the play information of
the Disc
the Disc
To check the DVD/Super Audio CD/CD text
Press TIME/TEXT repeatedly in step 2 to
display text recorded on the DVD/Super
Audio CD/CD.
The DVD/Super Audio CD/CD text appears
only when text is recorded in the disc. You
cannot change the text. If the disc does not
contain text, “NO TEXT” appears.
display text recorded on the DVD/Super
Audio CD/CD.
The DVD/Super Audio CD/CD text appears
only when text is recorded in the disc. You
cannot change the text. If the disc does not
contain text, “NO TEXT” appears.
To check DATA CD/DATA DVD album
name, etc.
name, etc.
By pressing TIME/TEXT while playing MP3
audio tracks on a DATA CD or DivX video
files on a DATA CD/DATA DVD, you can
display the name of the album/track/file, and
the audio bit rate (the amount of data per
second of the current audio) on your TV
screen.
audio tracks on a DATA CD or DivX video
files on a DATA CD/DATA DVD, you can
display the name of the album/track/file, and
the audio bit rate (the amount of data per
second of the current audio) on your TV
screen.
* Appears when:
– playing an MP3 audio track on a DATA CD.
– playing a DivX video file that contains MP3
– playing a DivX video file that contains MP3
audio on a DATA CD/DATA DVD.
Checking the information on the
front panel display
front panel display
You can view the time information and text
displayed on the TV screen also on the front
panel display. The information on the front
panel display changes as follows when you
change the time information on your TV
screen.
displayed on the TV screen also on the front
panel display. The information on the front
panel display changes as follows when you
change the time information on your TV
screen.
When playing a DVD VIDEO or DVD-RW
When playing a DATA CD (MP3 audio)
BRAHMS SYMPHONY
T
17:30
128k
JAZZ
RIVER SIDE
RIVER SIDE
Bit rate*
Album name
Track/file name
Playing time of the current title
Remaining time of the current title
Playing time of the current chapter
Remaining time of the current
chapter
chapter
Text
Current title and chapter number
(returns to top automatically)
Playing time and number of the
current track
current track
Track name
51
Viewing Information About the Dis
c
When playing a DATA CD (DivX video), or
DATA DVD (DivX video)
DATA DVD (DivX video)
When playing a VIDEO CD (without PBC
functions), Super Audio CD, or CD
functions), Super Audio CD, or CD
*1 When playing a Super Audio CD, the current
track is not displayed.
*2 The current track and index appear only when
playing a VIDEO CD or Super Audio CD.
z
Hints
• When playing VIDEO CDs with PBC functions,
the scene number or the playing time are
displayed.
displayed.
• Long text that does not fit in a single line will
scroll across the front panel display.
• You can also check the time information and text
using the Control Menu (page 13).
Notes
• Depending on the type of disc being played, the
disc text or track name may not be displayed.
• The player can only display the first level of the
disc text, such as the disc name or title.
• Playing time of MP3 audio tracks and DivX video
files may not be displayed correctly.
• If you play a disc containing JPEG image files
only, “NO AUDIO DATA” appears when
“MODE (MP3, JPEG)” is set to “AUTO,”
“JPEG” appears when “MODE (MP3, JPEG)” is
set to “IMAGE (JPEG)” in the front panel display.
“MODE (MP3, JPEG)” is set to “AUTO,”
“JPEG” appears when “MODE (MP3, JPEG)” is
set to “IMAGE (JPEG)” in the front panel display.
Playing time of the current file
The current file name
The current album and file number
(returns to top automatically)
Playing time and number of the
current track
current track
Remaining time of the current
track*
track*
1
Remaining time of the disc
Text
Playing time of the disc
Current track and index*
2
(returns to top automatically)
52
Sound Adjustments
Changing the Sound
When playing a DVD VIDEO or DATA
DVD/DATA CD (DivX video files) recorded
in multiple audio formats (PCM, Dolby
Digital, MPEG audio, or DTS), you can
change the audio format. If the DVD VIDEO
is recorded with multilingual tracks, you can
also change the language.
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from either the right or
left channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
disc containing a song with the vocals on the
right channel and the instruments on the left
channel, you can hear the instruments from
both speakers by selecting the left channel.
DVD/DATA CD (DivX video files) recorded
in multiple audio formats (PCM, Dolby
Digital, MPEG audio, or DTS), you can
change the audio format. If the DVD VIDEO
is recorded with multilingual tracks, you can
also change the language.
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from either the right or
left channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
disc containing a song with the vocals on the
right channel and the instruments on the left
channel, you can hear the instruments from
both speakers by selecting the left channel.
1
Press
(audio) during playback.
The following display appears.
2
Press
(audio) repeatedly to
select the desired audio signal.
◆ When playing a DVD VIDEO
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. See “Language
Code List” on page 98 to see which
language the code represents. When the
same language is displayed two or more
times, the DVD VIDEO is recorded in
multiple audio formats.
◆ When playing a DVD-RW
The types of sound tracks recorded on a
disc are displayed. The default setting is
underlined.
Example:
• 1: MAIN (main sound)
• 1: SUB (sub sound)
• 1: MAIN+SUB (main and sub sound)
◆ When playing a VIDEO CD, CD, or
DATA CD (MP3 audio)
The default setting is underlined.
• STEREO: the standard stereo sound
• 1/L: the sound of the left channel
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. See “Language
Code List” on page 98 to see which
language the code represents. When the
same language is displayed two or more
times, the DVD VIDEO is recorded in
multiple audio formats.
◆ When playing a DVD-RW
The types of sound tracks recorded on a
disc are displayed. The default setting is
underlined.
Example:
• 1: MAIN (main sound)
• 1: SUB (sub sound)
• 1: MAIN+SUB (main and sub sound)
◆ When playing a VIDEO CD, CD, or
DATA CD (MP3 audio)
The default setting is underlined.
• STEREO: the standard stereo sound
• 1/L: the sound of the left channel
(monaural)
• 2/R: the sound of the right channel
(monaural)
◆ When playing a DATA CD (DivX
video), or DATA DVD (DivX video)
The choice of DATA CD or DATA DVD
audio signal formats differ, depending on
the DivX video file contained on the disc.
The format is shown in the display.
◆ When playing a Super VCD
The default setting is underlined.
• 1:STEREO: the stereo sound of the
video), or DATA DVD (DivX video)
The choice of DATA CD or DATA DVD
audio signal formats differ, depending on
the DivX video file contained on the disc.
The format is shown in the display.
◆ When playing a Super VCD
The default setting is underlined.
• 1:STEREO: the stereo sound of the
audio track 1
• 1:1/L: the sound of the left channel of
the audio track 1 (monaural)
• 1:2/R: the sound of the right channel of
the audio track 1 (monaural)
• 2:STEREO: the stereo sound of the
audio track 2
• 2:1/L: the sound of the left channel of
the audio track 2 (monaural)
• 2:2/R: the sound of the right channel of
the audio track 2 (monaural)
1:ENGLISH DOLBY DIGITAL 3/2.1
1-13
DVP-NS955V
53
Soun
d Adjustme
nts
Notes
• While playing a Super VCD on which the audio
track 2 is not recorded, no sound will come out
when you select “2:STEREO,” “2:1/L,” or
“2:2/R.”
when you select “2:STEREO,” “2:1/L,” or
“2:2/R.”
• You cannot change the sound for Super Audio
CDs.
Checking the audio signal
format
format
You can check the audio signal format by
pressing
pressing
repeatedly during playback.
The format of the current audio signal (Dolby
Digital, DTS, PCM, etc.) appears as shown
below.
◆When playing a DVD VIDEO
Digital, DTS, PCM, etc.) appears as shown
below.
◆When playing a DVD VIDEO
Example:
Dolby Digital 5.1 ch
Example:
Dolby Digital 3 ch
◆When playing a DivX video file on a DATA
CD or a DATA DVD
CD or a DATA DVD
Example:
MP3 audio
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
sound elements (channels) shown below.
Each channel is output from a separate
speaker.
• Front (L)
• Front (R)
• Centre
• Rear (L)
• Rear (R)
• Rear (Monaural): This signal can be either
the Dolby Surround Sound processed
signals or the Dolby Digital sound’s
monaural rear audio signals.
signals or the Dolby Digital sound’s
monaural rear audio signals.
• LFE (Low Frequency Effect) signal
L
R
C
LFE
LS
RS
1:ENGLISH DOLBY DIGITAL 3 / 2 .1
Rear (L/R)
Front (L/R)
+ Centre
+ Centre
LFE (Low
Frequency Effect)
Frequency Effect)
Currently playing
programm format
programm format
L
R
S
2:SPANISH DOLBY DIGITAL 2 / 1
Front (L/R)
Rear (Monaural)
Currently playing
programm format
programm format
1: MP3 128k
Bit rate
54
Surround Mode Settings
You can enjoy surround sounds while playing
discs including Dolby Digital, DTS, and
MPEG audio DVDs, even if you have only 2
or 4 speakers. Select the surround mode that
best suits your speaker setup.
discs including Dolby Digital, DTS, and
MPEG audio DVDs, even if you have only 2
or 4 speakers. Select the surround mode that
best suits your speaker setup.
1
Press SUR during playback.
The following display appears.
2
Press SUR repeatedly to select
one of the surround modes.
one of the surround modes.
See the explanations given for each item
in the following section.
◆ For 2 speaker setups
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
in the following section.
◆ For 2 speaker setups
• TVS DYNAMIC
• TVS WIDE
• TVS NIGHT
• TVS STANDARD
◆ For 4 to 6 speaker setups
(If you select “NONE” in the setting of
“REAR” in “SPEAKER SETUP”
(page 87), you cannot select these
modes.)
• NORMAL SURROUND
• ENHANCED SURROUND
• VIRTUAL REAR SHIFT
• VIRTUAL MULTI REAR
• VIRTUAL MULTI DIMENSION
(If you select “NONE” in the setting of
“REAR” in “SPEAKER SETUP”
(page 87), you cannot select these
modes.)
• NORMAL SURROUND
• ENHANCED SURROUND
• VIRTUAL REAR SHIFT
• VIRTUAL MULTI REAR
• VIRTUAL MULTI DIMENSION
To cancel the setting
Select “OFF” in step 2.
For 2 speaker setups
When you connect a stereo TV or 2 front
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
If the player is set up to output the signal from
the DIGITAL OUT (OPTICAL or
COAXIAL) jack, the surround effect will be
heard only when “DOLBY DIGITAL” and
“DTS” are set to “D-PCM” and “MPEG” is
set to “PCM” in “AUDIO SETUP”(page 86).
◆TVS DYNAMIC
Creates one set of virtual rear speakers from
the sound of the front speakers (L, R) without
using actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
speakers, TVS (TV Virtual Surround) lets
you enjoy surround sound effects by using
sound imaging to create virtual rear speakers
from the sound of the front speakers (L: left,
R: right) without using actual rear speakers.
TVS was developed by Sony to produce
surround sound for home use using just a
stereo TV.
If the player is set up to output the signal from
the DIGITAL OUT (OPTICAL or
COAXIAL) jack, the surround effect will be
heard only when “DOLBY DIGITAL” and
“DTS” are set to “D-PCM” and “MPEG” is
set to “PCM” in “AUDIO SETUP”(page 86).
◆TVS DYNAMIC
Creates one set of virtual rear speakers from
the sound of the front speakers (L, R) without
using actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
◆TVS WIDE
Creates five sets of virtual rear speakers from
the sound of the front speakers (L, R) without
using actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
Creates five sets of virtual rear speakers from
the sound of the front speakers (L, R) without
using actual rear speakers (shown below).
This mode is effective when the distance
between the front L and R speakers is short,
such as with built-in speakers on a stereo TV.
SUR
TVS DYNAMIC
TV
55
Soun
d Adjustme
nts
◆TVS NIGHT
Large sounds, such as explosions, are
suppressed, but quieter sounds are
unaffected. This feature is useful when you
want to hear the dialogue and enjoy the
surround sound effects of “TVS WIDE” at
low volume.
◆TVS STANDARD
Creates three sets of virtual rear speakers
from the sound of the actual front speakers (L,
R) as shown below. This mode is effective
when you use 2 separate front speakers.
Large sounds, such as explosions, are
suppressed, but quieter sounds are
unaffected. This feature is useful when you
want to hear the dialogue and enjoy the
surround sound effects of “TVS WIDE” at
low volume.
◆TVS STANDARD
Creates three sets of virtual rear speakers
from the sound of the actual front speakers (L,
R) as shown below. This mode is effective
when you use 2 separate front speakers.
For 4 to 6 speaker setups
You can enjoy the following surround effects
by using the 2 front speakers and 2 rear
speakers.
Connect the player to the amplifier (receiver)
with the
by using the 2 front speakers and 2 rear
speakers.
Connect the player to the amplifier (receiver)
with the
connection (page 26).
You can experience Dolby Surround (Pro
Logic) sounds or Digital Cinema Sound
(DCS). DCS uses sound imaging to shift the
sound of the rear speakers away from the
actual speaker position or create entire sets of
virtual rear speakers from one set of actual
rear speakers. “VIRTUAL REAR SHIFT,”
“VIRTUAL MULTI REAR,” and
“VIRTUAL MULTI DIMENSION” make
use of this technology.
Logic) sounds or Digital Cinema Sound
(DCS). DCS uses sound imaging to shift the
sound of the rear speakers away from the
actual speaker position or create entire sets of
virtual rear speakers from one set of actual
rear speakers. “VIRTUAL REAR SHIFT,”
“VIRTUAL MULTI REAR,” and
“VIRTUAL MULTI DIMENSION” make
use of this technology.
◆NORMAL SURROUND
Software with 2 channel audio signals is
decoded with the Dolby Surround (Pro Logic)
decoder to create surround effects. The rear
speakers will emit identical monaural sounds.
If you are using a centre speaker, the
appropriate sounds for the centre speaker will
be delivered.
Software with 2 channel audio signals is
decoded with the Dolby Surround (Pro Logic)
decoder to create surround effects. The rear
speakers will emit identical monaural sounds.
If you are using a centre speaker, the
appropriate sounds for the centre speaker will
be delivered.
◆ENHANCED SURROUND
Provides a greater sense of presence from a
Dolby Surround (Pro Logic) source with a
monaural rear channel signal. Produces a
stereo like effect in the rear channels.
◆VIRTUAL REAR SHIFT
Shifts the sound of the rear speakers away
from the actual speaker position.
The shift position differs according to
“REAR” or “SIDE” setting of the rear
speakers (page 87).
Provides a greater sense of presence from a
Dolby Surround (Pro Logic) source with a
monaural rear channel signal. Produces a
stereo like effect in the rear channels.
◆VIRTUAL REAR SHIFT
Shifts the sound of the rear speakers away
from the actual speaker position.
The shift position differs according to
“REAR” or “SIDE” setting of the rear
speakers (page 87).
L: Front speaker (left)
R: Front speaker (right)
R: Front speaker (right)
: Virtual speaker
TV
L
R
D-1
L
R
RS
LS
LS
RS
L
R
L
LS
RS
R
REAR
SIDE
,continued
56
◆VIRTUAL MULTI REAR
Creates an array of virtual rear speakers from
a single set of actual rear speakers.
The position of the virtual rear speakers
differs according to “REAR” or “SIDE”
setting of the rear speakers (page 87).
Creates an array of virtual rear speakers from
a single set of actual rear speakers.
The position of the virtual rear speakers
differs according to “REAR” or “SIDE”
setting of the rear speakers (page 87).
◆VIRTUAL MULTI DIMENSION
Creates an array of virtual rear speaker
positions higher than the listener from a
single set of actual rear speakers.
This mode creates five sets of virtual speakers
surrounding the listener at approximately a
30
Creates an array of virtual rear speaker
positions higher than the listener from a
single set of actual rear speakers.
This mode creates five sets of virtual speakers
surrounding the listener at approximately a
30
q angle of elevation. The effect differs
according to “REAR” or “SIDE” setting of
the rear speakers (page 87).
the rear speakers (page 87).
Notes
• When you select one of the surround modes, turn
off the surround setting of the connected TV or
amplifier (receiver).
amplifier (receiver).
• Not all discs will respond to the “TVS NIGHT”
function in the same way.
• To enjoy the multichannel audio through the
5.1CH OUTPUT jacks, correctly set each speaker
position and distance (page 26, 87).
position and distance (page 26, 87).
• When the playing signal does not contain a signal
for the rear speakers, you cannot hear the TVS
effect.
effect.
• When you select one of the TVS modes, the
player does not output the sound of centre
speaker.
speaker.
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
that the speakers are located in similar
surroundings.
• If you use the DIGITAL OUT (OPTICAL or
COAXIAL) jack and set “DOLBY DIGITAL” to
“DOLBY DIGITAL,” “DTS” to “DTS,” and
“MPEG” to “MPEG” in “AUDIO SETUP,”
sound will come from your speakers but it will not
have the SURROUND effect.
“DOLBY DIGITAL,” “DTS” to “DTS,” and
“MPEG” to “MPEG” in “AUDIO SETUP,”
sound will come from your speakers but it will not
have the SURROUND effect.
L
LS
RS
R
L
R
LS
RS
REAR
SIDE
LS
RS
L
R
L
R
LS
RS
REAR
SIDE
L: Front speaker (left)
R: Front speaker (right)
LS: Rear speaker (left)
RS: Rear speaker (right)
R: Front speaker (right)
LS: Rear speaker (left)
RS: Rear speaker (right)
: Virtual speaker
1-14
DVP-NS955V
57
Enjoying Movies
Enjoying Movies
Changing the Angles
If various angles (multi-angles) for a scene
are recorded on the DVD VIDEO, “
are recorded on the DVD VIDEO, “
”
appears in the front panel display. This means
that you can change the viewing angle.
that you can change the viewing angle.
1
Press
(angle) during playback.
The number of the angle appears on the
display.
display.
2
Press
(angle) repeatedly to
select an angle number.
The scene changes to the selected angle.
Note
Depending on the DVD VIDEO, you may not be
able to change the angles even if multi-angles are
recorded on the DVD VIDEO.
able to change the angles even if multi-angles are
recorded on the DVD VIDEO.
Displaying the Subtitles
If subtitles are recorded on the discs, you can
change the subtitles or turn them on and off
whenever you want while playing the disc.
change the subtitles or turn them on and off
whenever you want while playing the disc.
1
Press
(subtitle) during
playback.
The following display appears.
2
Press
(subtitle) repeatedly to
select a setting.
◆ When playing a DVD VIDEO
Select the language.
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. See “Language
Code List” on page 98 to see which
language the code represents.
◆ When playing a DVD-RW
Select “ON.”
◆ When playing a DATA CD (DivX
video), or DADA DVD
The choices of DATA CD or DATA
DVD subtitles differ, depending on the
DivX video file contained on the disc.
The choices are shown in the display.
Select the language.
Depending on the DVD VIDEO, the
choice of language varies.
When 4 digits are displayed, they
indicate a language code. See “Language
Code List” on page 98 to see which
language the code represents.
◆ When playing a DVD-RW
Select “ON.”
◆ When playing a DATA CD (DivX
video), or DADA DVD
The choices of DATA CD or DATA
DVD subtitles differ, depending on the
DivX video file contained on the disc.
The choices are shown in the display.
2
1:ENGLISH
,continued
58
To turn off the subtitles
Select “OFF” in step 2.
Notes
• Depending on the DVD VIDEO, you may not be
able to change the subtitles even if multilingual
subtitles are recorded on it. You also may not be
able to turn them off.
subtitles are recorded on it. You also may not be
able to turn them off.
• With DATA CDs, subtitles can be changed for
DivX video files only.
• You can change the subtitles if the DivX video
file has an “.AVI” or “.DIVX” extension and
contains subtitle information within the same file.
contains subtitle information within the same file.
Adjusting the Playback
Picture
Picture
(CUSTOM PICTURE MODE)
You can adjust the video signal of the DVD,
VIDEO CD, DATA CD in JPEG format, or
DATA CD/DATA DVD containing DivX
video files from the player to obtain the
picture quality you want. Choose the setting
that best suits the programme you are
watching. When you select “MEMORY,”
you can make further adjustments to each
element of the picture (colour, brightness,
etc.).
VIDEO CD, DATA CD in JPEG format, or
DATA CD/DATA DVD containing DivX
video files from the player to obtain the
picture quality you want. Choose the setting
that best suits the programme you are
watching. When you select “MEMORY,”
you can make further adjustments to each
element of the picture (colour, brightness,
etc.).
1
Press PICTURE MODE during
playback.
playback.
The following display appears.
PICTURE
MODE
MODE
O RETURN
DISPLAY
C/X/x/c
ENTER
DYNAMIC 1
59
Enjoying Movies
2
Press PICTURE MODE repeatedly
to select the setting you want.
The default setting is underlined.
• STANDARD: displays a standard
• STANDARD: displays a standard
picture.
• DYNAMIC 1: produces a bold
dynamic picture by increasing the
picture contrast and the colour
intensity.
picture contrast and the colour
intensity.
• DYNAMIC 2: produces a more
dynamic picture than DYNAMIC 1 by
further increasing the picture contrast
and colour intensity.
further increasing the picture contrast
and colour intensity.
• CINEMA 1: enhances details in dark
areas by increasing the black level.
• CINEMA 2: white colours become
brighter and black colours become
richer, and the colour contrast is
increased.
richer, and the colour contrast is
increased.
• MEMORY: adjusts the picture in
greater detail.
z
Hint
When you watch a movie, “CINEMA 1” or
“CINEMA 2” is recommended.
“CINEMA 2” is recommended.
Adjusting the picture items in
“MEMORY”
“MEMORY”
You can adjust each element of the picture
individually.
• PICTURE: changes the contrast
• BRIGHTNESS: changes the overall
individually.
• PICTURE: changes the contrast
• BRIGHTNESS: changes the overall
brightness
• COLOR: makes the colours deeper or
lighter
• HUE: changes the colour balance
1
Press PICTURE MODE repeatedly to
select “MEMORY” and press ENTER.
select “MEMORY” and press ENTER.
The “PICTURE” adjustment bar appears.
2
Press C/c to adjust the picture
contrast.
contrast.
To go the next or previous picture item
without saving the current setting, press
X/x.
without saving the current setting, press
X/x.
3
Press ENTER.
The adjustment is saved, and
“BRIGHTNESS” adjustment bar
appears.
“BRIGHTNESS” adjustment bar
appears.
4
Repeat step 2 and 3 to adjust
“BRIGHTNESS,” “COLOR,” and
“HUE.”
“BRIGHTNESS,” “COLOR,” and
“HUE.”
To turn off the display
Press O RETURN , or DISPLAY.
Note
The “BRIGHTNESS” setting is not effective if you
connect the player via the LINE OUT (VIDEO), S
VIDEO OUT, or LINE (RGB) - TV jack and select
“PROGRESSIVE AUTO” or “PROGRESSIVE
VIDEO” by using the PROGRESSIVE button on
the front panel.
connect the player via the LINE OUT (VIDEO), S
VIDEO OUT, or LINE (RGB) - TV jack and select
“PROGRESSIVE AUTO” or “PROGRESSIVE
VIDEO” by using the PROGRESSIVE button on
the front panel.
8 ( 3
)
C
0 1 : 3 2 : 5 5
PICTURE
0
Cancel :
Select :
ENTER
RETURN
60
Sharpening the Pictures
(SHARPNESS)
You can enhance the outlines of images to
produce a sharper picture.
produce a sharper picture.
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(SHARPNESS), then press ENTER.
The options for “SHARPNESS” appear.
3
Press X/x to select a level.
• 1: enhances the outline.
• 2: enhances the outline more than 1.
• 2: enhances the outline more than 1.
4
Press ENTER.
The selected setting takes effect.
To cancel the “SHARPNESS” setting
Select “OFF” in step 3.
Note
This setting is not effective if you connect the player
via the LINE OUT (VIDEO), S VIDEO OUT, or
LINE (RGB) - TV jack and select
“PROGRESSIVE AUTO” or “PROGRESSIVE
VIDEO” by using the PROGRESSIVE button on
the front panel.
via the LINE OUT (VIDEO), S VIDEO OUT, or
LINE (RGB) - TV jack and select
“PROGRESSIVE AUTO” or “PROGRESSIVE
VIDEO” by using the PROGRESSIVE button on
the front panel.
ENTER
X/x
DISPLAY
DVD VIDEO
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
2
1
OFF
OFF
1-15
DVP-NS955V
61
Enjoying Movies
Adjusting the Delay
Between the Picture and
Sound (AV ALIGNMENT)
(DVP-NS955V only)
Between the Picture and
Sound (AV ALIGNMENT)
(DVP-NS955V only)
When the sound does not match the pictures
on the screen, you can adjust the delay
between the picture and sound.
on the screen, you can adjust the delay
between the picture and sound.
1
Press DISPLAY during playback.
The Control Menu appears.
2
Press X/x to select
(AV
ALIGNMENT), then press ENTER.
The following display appears.
3
Press x to select “SETc”, then
press ENTER.
press ENTER.
The “AV ALIGNMENT” adjustment bar
appears.
appears.
4
Press c repeatedly to adjust the
delay.
delay.
Each time you press
C/c, the delay is
adjusted by 10 milliseconds.
5
Press ENTER.
The selected setting takes effect.
To reset the “AV ALIGNMENT” setting
Press CLEAR in step 4.
Note
This function is not effective if you use the
DIGITAL OUT (OPTICAL or COAXIAL) jack
and set “DOLBY DIGITAL,” “DTS,” or “MPEG”
in AUDIO SETUP to “DOLBY DIGITAL,”
“DTS,” or “MPEG” respectively (page 86).
DIGITAL OUT (OPTICAL or COAXIAL) jack
and set “DOLBY DIGITAL,” “DTS,” or “MPEG”
in AUDIO SETUP to “DOLBY DIGITAL,”
“DTS,” or “MPEG” respectively (page 86).
CLEAR
C/X/x/c
DISPLAY
ENTER
DVD VIDEO
1 ( 2 6 )
1 ( 1 2 )
T
0 : 0 0 : 0 2
0 ms
SET
SET
AV ALIGNMENT
0ms
62
Enjoying MP3 Audio and JPEG
Images
Images
About MP3 Audio Tracks
and JPEG Image Files
and JPEG Image Files
MP3 is audio compression technology that
satisfies the ISO/MPEG regulations. JPEG is
image compression technology.
You can play DATA CDs that contain MP3
audio tracks or JPEG image files.
satisfies the ISO/MPEG regulations. JPEG is
image compression technology.
You can play DATA CDs that contain MP3
audio tracks or JPEG image files.
DATA CDs that the player can
play
play
You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) and JPEG format. However,
the discs must be recorded according to
ISO 9660 Level 1, Level 2 or Joliet format for
the player to recognize the tracks (or files).
You can also play discs recorded in Multi
Session.
Refer to the instructions supplied with the
CD-R/CD-RW drives and the recording
software (not supplied) for details on the
recording format.
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) and JPEG format. However,
the discs must be recorded according to
ISO 9660 Level 1, Level 2 or Joliet format for
the player to recognize the tracks (or files).
You can also play discs recorded in Multi
Session.
Refer to the instructions supplied with the
CD-R/CD-RW drives and the recording
software (not supplied) for details on the
recording format.
Note on Multi Session discs
If MP3 audio tracks or JPEG image files are
recorded in the first session, the player will
also play MP3 audio tracks or JPEG image
files in other sessions. If audio tracks and
images in Music CD format or Video CD
format are recorded in the first session, only
the first session will be played back.
recorded in the first session, the player will
also play MP3 audio tracks or JPEG image
files in other sessions. If audio tracks and
images in Music CD format or Video CD
format are recorded in the first session, only
the first session will be played back.
Note
The player may not be able to play some DATA
CDs created in the Packet Write format.
CDs created in the Packet Write format.
MP3 audio track or JPEG image
file that the player can play
file that the player can play
The player can play the following tracks and
files:
– MP3 audio tracks with the extension
files:
– MP3 audio tracks with the extension
“.MP3.”
– JPEG image files with the extension
“.JPEG” or “.JPG.”
– JPEG image files that conform to the DCF*
image file format.
* “Design rule for Camera File system”: Image
standards for digital cameras regulated by JEITA
(Japan Electronics and Information Technology
Industries Association).
(Japan Electronics and Information Technology
Industries Association).
Notes
• The player will play any data with the extension
“.MP3,” “.JPG,” or “.JPEG,” even if they are not
in MP3 or JPEG format. Playing these data may
generate a loud noise which could damage your
speaker system.
in MP3 or JPEG format. Playing these data may
generate a loud noise which could damage your
speaker system.
• The player does not conform to audio tracks in
MP3PRO format.
• Some JPEG files cannot be played.
• You cannot play MP3 audio tracks/JPEG image
• You cannot play MP3 audio tracks/JPEG image
files in DATA CDs that contain DivX video files.
About playback order of albums,
tracks, and files
tracks, and files
Albums play in the following order:
◆Structure of disc contents
◆Structure of disc contents
ROOT
Tree 1
Tree 2
Tree 3
Tree 4
Tree 5
Album
Track or file
63
Enjo
ying MP3
Aud
io an
d JPE
G Ima
ges
When you insert a DATA CD and press H,
the numbered tracks (or files) are played
sequentially, from 1 through 7. Any sub-
albums/tracks (or files) contained within a
currently selected album take priority over
the next album in the same tree. (Example: C
contains D so 4 is played before 5.)
the numbered tracks (or files) are played
sequentially, from 1 through 7. Any sub-
albums/tracks (or files) contained within a
currently selected album take priority over
the next album in the same tree. (Example: C
contains D so 4 is played before 5.)
When you press MENU and the list of album
names appears (page 64), the album names
are arranged in the following order:
A
names appears (page 64), the album names
are arranged in the following order:
A
t B t C t D t F t G. Albums
that do not contain tracks (or files) (such as
album E) do not appear in the list.
album E) do not appear in the list.
z
Hints
• If you add numbers (01, 02, 03, etc.) to the front
of the track/file names when you store the tracks
(or files) in a disc, the tracks and files will be
played in that order.
(or files) in a disc, the tracks and files will be
played in that order.
• Since a disc with many trees takes longer to start
playback, it is recommended that you create
albums with no more than two trees.
albums with no more than two trees.
Notes
• Depending on the software you use to create the
DATA CD, the playback order may differ from
the above illustration.
the above illustration.
• The playback order above may not be applicable
if there are more than 200 albums and 300 tracks/
files in each album.
files in each album.
• The player can recognize up to 200 albums (the
player will count just albums, including albums
that do not contain MP3 audio tracks and JPEG
image files). The player will not play any albums
beyond the 200th album.
that do not contain MP3 audio tracks and JPEG
image files). The player will not play any albums
beyond the 200th album.
• Proceeding to the next or another album may take
some time.
Playing MP3 Audio
Tracks or JPEG Image
Files
Tracks or JPEG Image
Files
You can play MP3 audio tracks and JPEG
image files on DATA CDs (CD-ROMs/CD-
Rs/CD-RWs).
image files on DATA CDs (CD-ROMs/CD-
Rs/CD-RWs).
z
Hint
You can view the disc information while playing
MP3 audio tracks and JPEG image files (page 49).
MP3 audio tracks and JPEG image files (page 49).
Notes
• DATA CDs recorded in KODAK Picture CD
format automatically start playing when inserted.
• If no MP3 audio track or JPEG image file is
recorded on the DATA CD, “No audio data” or
“No image data” appears on the screen.
“No image data” appears on the screen.
CLEAR
./>
H
C/X/x/c
MENU
O RETURN
ENTER
x
PICTURE
NAVI
NAVI
ZOOM
,continued
64
Selecting an album
1
Press MENU.
The list of albums on the disc appears.
When an album is being played, its title is
shaded.
When an album is being played, its title is
shaded.
2
Press X/x to select the album you
want to play.
want to play.
3
Press H.
Playback starts from the selected album.
To select MP3 audio tracks, see
“Selecting an MP3 audio track”
(page 64).
To select JPEG image files, see
“Selecting a JPEG image file” (page 65).
To select MP3 audio tracks, see
“Selecting an MP3 audio track”
(page 64).
To select JPEG image files, see
“Selecting a JPEG image file” (page 65).
To stop playback
Press x.
To go to the next or previous page
Press
c or C.
To turn on or off the display
Press MENU repeatedly.
z
Hints
• Of the selected album, you can select to play only
the MP3 audio tracks, JPEG image files, or both,
by setting “MODE (MP3, JPEG)” (page 67).
by setting “MODE (MP3, JPEG)” (page 67).
• During playback, you can press ALBUM +/– to
go to the next/previous album without using the
album list.
album list.
Selecting an MP3 audio track
1
After step 2 of “Selecting an album,”
press ENTER.
press ENTER.
The list of tracks in the album appears.
2
Press X/x to select a track, and press
ENTER.
ENTER.
Playback starts from the selected track.
To stop playback
Press x.
To go to the next or previous page
Press
c or C.
To return to the previous display
Press O RETURN.
To go to the next or previous MP3 audio
track
track
Press > or . during playback. You can
select the first track of the next album by
pressing > during playback of the last
track of the current album.
Note that you cannot return to the previous
album by using ., and that you need to
select the previous album from the album list.
select the first track of the next album by
pressing > during playback of the last
track of the current album.
Note that you cannot return to the previous
album by using ., and that you need to
select the previous album from the album list.
3 ( 3 0 )
R O C K B E S T H I T
K A R A O K E
M Y F A V O U R I T E S O N G
R & B
J A Z Z
C L A S S I C
S A L S A O F C U B A
B O S S A N O V A
K A R A O K E
M Y F A V O U R I T E S O N G
R & B
J A Z Z
C L A S S I C
S A L S A O F C U B A
B O S S A N O V A
M Y F A V O U R I T E S O N G
1 ( 2 5 6 )
1 ( 2 5 6 )
W A L T Z F O R D E B B Y
M Y R O M A N C E
M I L E S T O N E S
M Y F U N N Y V A L E N T I N E
A U T U M L E A V E S
A L L B L U E S
S O M E D A Y M Y P R I N C E W ...
M Y R O M A N C E
M I L E S T O N E S
M Y F U N N Y V A L E N T I N E
A U T U M L E A V E S
A L L B L U E S
S O M E D A Y M Y P R I N C E W ...
Click on the first or last page to see other DVP-NS955V service manuals if exist.