Sony DVP-NS308 / DVP-NS38 / DVP-NS39 Service Manual ▷ View online
1-5
DVP-NS38/NS39/NS308
19
H
oo
kups
kups
8
Press ENTER.
The Setup Display for selecting the type
of video signal output from the LINE
(RGB)-TV jack appears.
of video signal output from the LINE
(RGB)-TV jack appears.
9
Press
X/x to select the type of
signal you want to output from the
LINE (RGB)-TV jack.
LINE (RGB)-TV jack.
◆ Video signals
• VIDEO (page 51)
◆ S video signals
• S VIDEO (page 51)
◆ RGB signals
• RGB (page 51)
• VIDEO (page 51)
◆ S video signals
• S VIDEO (page 51)
◆ RGB signals
• RGB (page 51)
10
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your audio
component such as an amplifier
(receiver) appears.
of jack used to connect your audio
component such as an amplifier
(receiver) appears.
11
Press
X/x to select the type of
jack (if any) you are using to
connect to an audio component,
then press ENTER.
connect to an audio component,
then press ENTER.
If you did not connect an audio
component, select “NO,” then go to step
15.
If you connected an audio component
using coaxial digital cord, select “YES:
DIGITAL OUTPUT.”
component, select “NO,” then go to step
15.
If you connected an audio component
using coaxial digital cord, select “YES:
DIGITAL OUTPUT.”
12
Press
X/x to select the type of
Dolby Digital signal you wish to
send to your audio component.
send to your audio component.
If your audio component has a Dolby
Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
Digital decoder, select “DOLBY
DIGITAL.” Otherwise, select “D-PCM.”
13
Press ENTER.
“DTS” is selected.
14
Press
X/x to select whether or
not you wish to send a DTS signal
to your audio component.
to your audio component.
If your audio component has a DTS
decoder, select “ON.” Otherwise, select
“OFF.”
decoder, select “ON.” Otherwise, select
“OFF.”
15
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your audio component has an MPEG
audio decoder, set “MPEG” to “MPEG”
(page 54).
and setup operations are complete.
If your audio component has an MPEG
audio decoder, set “MPEG” to “MPEG”
(page 54).
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
16:9
ON
JACKET PICTURE
LINE:
VIDEO
VIDEO
S VIDEO
RGB
NO
YES
Is this player connected to an amplifier
(receiver) ?
(receiver) ?
DIGITAL OUTPUT
AUDIO SETUP
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
D-PCM
D-PCM
48kHz/96kHz PCM:
48kHz/16bit
DTS:
DOLBY DIGITAL
AUDIO SETUP
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
DTS:
48kHz/96kHz PCM:
48kHz/96kHz PCM:
OFF
OFF
OFF
ON
20
Playback
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Press
[/1.
The player turns on.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
TV so that the signal from the
player appears on the TV screen.
◆ When using an audio component
Turn on the audio component and select
the appropriate channel so that you can
hear sound from the player.
Turn on the audio component and select
the appropriate channel so that you can
hear sound from the player.
4
Press
A on the player, and place a
disc on the disc tray.
5
Press
H.
The disc tray closes. The player starts
playback (continuous play). Adjust the
volume on the TV or the audio
component.
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 23. For VIDEO CDs,
see page 23.
playback (continuous play). Adjust the
volume on the TV or the audio
component.
Depending on the disc, a menu may
appear on the TV screen. For DVD
VIDEOs, see page 23. For VIDEO CDs,
see page 23.
To turn off the player
Press
Press
[/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
“AUTO POWER OFF” in “CUSTOM SETUP” to
“ON” or “OFF” (page 52).
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn this function on or off, set
“AUTO POWER OFF” in “CUSTOM SETUP” to
“ON” or “OFF” (page 52).
Note
Discs created on DVD recorders must be correctly
finalized before they can be played. For more
information about finalizing, refer to the operating
instructions supplied with the DVD recorder.
finalized before they can be played. For more
information about finalizing, refer to the operating
instructions supplied with the DVD recorder.
Notes on playing DTS sound tracks on a
DVD VIDEO
DVD VIDEO
• DTS audio signals are output only through the
DIGITAL OUT (COAXIAL) jack.
• When you play a DVD VIDEO with DTS sound
tracks, set “DTS” to “ON” in “AUDIO SETUP”
(page 54).
(page 54).
• If you connect the player to audio equipment
without a DTS decoder, do not set “DTS” to “ON”
in “AUDIO SETUP” (page 54). A loud noise may
come out from the speakers, affecting your ears or
causing the speakers to be damaged.
in “AUDIO SETUP” (page 54). A loud noise may
come out from the speakers, affecting your ears or
causing the speakers to be damaged.
ENTER
MENU
TIME/TEXT
RETURN
(advance)
TOP MENU
CLEAR
DISPLAY
FAST PLAY
ZOOM
SLOW PLAY
(replay)
Number
buttons
buttons
Playback side facing down
21
Playback
Additional operations
To check the position of the buttons below,
see the illustration on page 20.
see the illustration on page 20.
*
1
All DVDs except for DVD+RWs/DVD+Rs/
DVD+Rs DL and DivX video files.
DVD+Rs DL and DivX video files.
*
2
DVDs and DivX video files only.
*
3
Video and JPEG pictures only (except
BACKGROUND pictures). You can move the
enlarged picture using
BACKGROUND pictures). You can move the
enlarged picture using
C/X/x/c. Depending
upon the contents of the disc, the zoom function
may be cancelled automatically when the
picture is moved.
may be cancelled automatically when the
picture is moved.
Note
You may not be able to use the Replay or Advance
function with some scenes.
function with some scenes.
Playback quickly or slowly with
sound
sound
You can listen to dialogue or sound while
playing the current scene quickly or slowly.
playing the current scene quickly or slowly.
During playback, press FAST PLAY or
SLOW PLAY.
The speed changes when you press either
FAST PLAY or SLOW PLAY.
SLOW PLAY.
The speed changes when you press either
FAST PLAY or SLOW PLAY.
To return to normal playback
Press
Press
H.
Notes
• You can only use this function with DVDs,
VIDEO CDs, or Super VCDs only.
• “Operation not possible” will appear when
maximum or minimum speed is reached.
• During Fast Play and Slow Play mode, you cannot
change angle (page 21), subtitle (page 21), and
the sound (page 38). The sound can only be
changed for VIDEO CDs/Super VCDs.
the sound (page 38). The sound can only be
changed for VIDEO CDs/Super VCDs.
• Fast Play and Slow Play functions do not work
when playing DTS sound tracks.
• You cannot use Fast Play or Slow Play function
when playing a still picture in DVD-VR mode.
Locking the disc tray (Child Lock)
You can lock the disc tray to prevent children
from opening it.
from opening it.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “LOCKED” appears
on the front panel display. The
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “LOCKED” appears
on the front panel display. The
A
and
Z
buttons on the player or the remote do not
work while the Child Lock is set.
work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
Note
Even if you select “RESET” under “SETUP” in the
Control Menu (page 50), the disc tray remains
locked.
Control Menu (page 50), the disc tray remains
locked.
To
Operation
Stop
Press
x
Pause
Press
X
Resume play after
pause
pause
Press
X or H
Go to the next chapter,
track, or scene in
continuous play mode
track, or scene in
continuous play mode
Press
>
Go back to the
previous chapter,
track, or scene in
continuous play mode
previous chapter,
track, or scene in
continuous play mode
Press
.
Stop play and remove
the disc
the disc
Press
Z
Change the angle
Press
(angle)
during playback.
Press
Press
(angle)
repeatedly to select an
angle number.
angle number.
Display the subtitle
Press
(subtitle)
during playback.
Press
Press
(subtitle)
repeatedly to select a
subtitle language.
subtitle language.
Replay the previous
scene*
scene*
1
Press
(replay)
during playback
Briefly fast forward
the current scene*
the current scene*
2
Press
(advance) during
playback
(advance) during
playback
Magnify the image*
3
Press ZOOM
repeatedly. Press
CLEAR to cancel.
repeatedly. Press
CLEAR to cancel.
,continued
22
Resuming Playback from the
Point Where You Stopped the
Disc (Resume Play/Multi-disc
Resume)
Point Where You Stopped the
Disc (Resume Play/Multi-disc
Resume)
The player remembers the point where you
stopped the disc.
stopped the disc.
Notes
• For DVD-VR mode, CDs, DATA CDs, and
DATA DVDs the player remembers the resume
playback point for the current disc.
The resume point is cleared when:
playback point for the current disc.
The resume point is cleared when:
– you opened the disc tray.
– you disconnect the mains lead.
– the player enters standby mode (DATA CD/
– you disconnect the mains lead.
– the player enters standby mode (DATA CD/
DATA DVD containing MP3 audio tracks/JPEG
image files only).
image files only).
• Resume Play does not work during Shuffle Play
and Programme Play.
• This function may not work with some discs.
Resuming playback for the
current disc (Resume Play)
current disc (Resume Play)
The player remembers the point where you
stopped the disc even if the player enters
standby mode by pressing
stopped the disc even if the player enters
standby mode by pressing
[/1.
1
While playing a disc, press
x to
stop playback.
“RESUME” appears on the front panel
display.
display.
2
Press
H.
The player starts playback from the point
where you stopped the disc in step 1.
where you stopped the disc in step 1.
z Hint
To play from the beginning of the disc, press
To play from the beginning of the disc, press
x
twice, then press
H.
Note
• The resume playback point for the current disc is
cleared when:
– you change the play mode.
– you change the settings on the Setup Display.
– you disconnect the mains lead.
– you change the settings on the Setup Display.
– you disconnect the mains lead.
Storing the point where you
stopped the disc (Multi-disc
Resume) (DVP-NS39 only)
stopped the disc (Multi-disc
Resume) (DVP-NS39 only)
The player stores the point where you stopped
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the seventh disc, the resume playback
point for the first disc is deleted.
the disc for up to 6 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the seventh disc, the resume playback
point for the first disc is deleted.
z Hints
• To play from the beginning of the disc, press
• To play from the beginning of the disc, press
x
twice, then press
H.
• To turn off the Multi-disc Resume function, set
“MULTI-DISC RESUME” in “CUSTOM
SETUP” to “OFF” (page 52). Playback restarts at
the resume point only for the current disc in the
player.
SETUP” to “OFF” (page 52). Playback restarts at
the resume point only for the current disc in the
player.
Notes
• “MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 52).
function to work (page 52).
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• If “MULTI-DISC RESUME” in “CUSTOM
– you change the settings on the Setup Display.
• If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point.
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point.
1-6
DVP-NS38/NS39/NS308
23
Playback
Using the DVD’s Menu
A DVD VIDEO is divided into long sections
of a picture or a music feature called “titles.”
Press TOP MENU to select a title you want
when you play a DVD VIDEO which
contains several titles. Press MENU to select
items such as language for the sound and
subtitles when you play a DVD VIDEO that
allows you to do so.
of a picture or a music feature called “titles.”
Press TOP MENU to select a title you want
when you play a DVD VIDEO which
contains several titles. Press MENU to select
items such as language for the sound and
subtitles when you play a DVD VIDEO that
allows you to do so.
Selecting “ORIGINAL” or “PLAY
LIST” in DVD-VR mode
LIST” in DVD-VR mode
Some DVD-VR (Video Recording) mode
have two types of titles for playback:
originally recorded titles (ORIGINAL) and
titles that can be created on recordable DVD
players for editing (PLAY LIST). You can
select the type of title to be played.
have two types of titles for playback:
originally recorded titles (ORIGINAL) and
titles that can be created on recordable DVD
players for editing (PLAY LIST). You can
select the type of title to be played.
1
Press DISPLAY when the player is
in stop mode.
The Control Menu appears.
2
Press
X/x to select
(ORIGINAL/PLAY LIST), then press
ENTER.
The options for “ORIGINAL/PLAY
LIST” appear.
LIST” appear.
3
Press
X/x to select a setting.
• PLAY LIST: plays the titles created
from “ORIGINAL” for editing.
• ORIGINAL: plays the titles originally
recorded.
4
Press ENTER.
Playing VIDEO CDs With PBC
Functions
Functions
(PBC Playback)
PBC (Playback Control) allows you to play
VIDEO CDs interactively by following the
menu on the TV screen.
When you start playing a VIDEO CD with
PBC functions, the menu for your selection
appears.
Select an item using the number buttons, and
press ENTER. Then, follow the instructions
in the menu for interactive operations (Press
VIDEO CDs interactively by following the
menu on the TV screen.
When you start playing a VIDEO CD with
PBC functions, the menu for your selection
appears.
Select an item using the number buttons, and
press ENTER. Then, follow the instructions
in the menu for interactive operations (Press
H
when “Press SELECT” appears).
Refer to the instructions supplied with the
disc, as the operating procedure may differ
depending on the VIDEO CD.
disc, as the operating procedure may differ
depending on the VIDEO CD.
To return to the menu
Press
Press
O RETURN.
z Hint
To play without using PBC, press
To play without using PBC, press
./> or the
number buttons while the player is stopped to select
a track, then press
a track, then press
H or ENTER.
“Play without PBC” appears on the TV screen and
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press
x twice then
press
H.
Checking the Playing Time and
Remaining Time
Remaining Time
You can check the playing time and
remaining time of the current title, chapter, or
track. Also, you can check the DVD/CD text,
track name, ID3 tag information (MP3
audio), or file name (DivX video) recorded on
the disc.
remaining time of the current title, chapter, or
track. Also, you can check the DVD/CD text,
track name, ID3 tag information (MP3
audio), or file name (DivX video) recorded on
the disc.
1
Press TIME/TEXT during playback.
The following display appears.
1 8 ( 3 4 )
1 2 ( 2 7 )
DVD-VR
PLAY LIST
PLAY LIST
ORIGINAL
T
1 : 3 2 : 5 5
T 1:01:57
Time
information
information
,continued
24
2
Press TIME/TEXT repeatedly to
change the time information.
The available time information depends
upon the type of disc you are playing.
upon the type of disc you are playing.
Checking the play information of
the disc
the disc
To check the DVD/CD text
Press TIME/TEXT repeatedly to display text
recorded on the DVD/CD.
The DVD/CD text appears only when text is
recorded in the disc. You cannot change the
text. If the disc does not contain text, “NO
TEXT” appears.
Press TIME/TEXT repeatedly to display text
recorded on the DVD/CD.
The DVD/CD text appears only when text is
recorded in the disc. You cannot change the
text. If the disc does not contain text, “NO
TEXT” appears.
To check DATA CD/DATA DVD album
name, etc.
By pressing TIME/TEXT while playing MP3
audio tracks on a DATA CD/DATA DVD or
DivX video files on a DATA CD/DATA
DVD, you can display the name of the album/
track/file and the audio bit rate (the amount of
data per second of the current audio track) on
your TV screen.
name, etc.
By pressing TIME/TEXT while playing MP3
audio tracks on a DATA CD/DATA DVD or
DivX video files on a DATA CD/DATA
DVD, you can display the name of the album/
track/file and the audio bit rate (the amount of
data per second of the current audio track) on
your TV screen.
If an MP3 audio track has an ID3 tag, the
player will display the album name/track title
from the ID3 tag information.
ID3 tag information for MP3 audio track is
displayed when the tracks have ID3 version 1
or ID3 version 2. If there are ID3 version 1
and version 2 tags, ID3 version 2 tag
information has priority.
Note that this player supports ID3 versions
1.0/1.1 and 2.2/2.3.
player will display the album name/track title
from the ID3 tag information.
ID3 tag information for MP3 audio track is
displayed when the tracks have ID3 version 1
or ID3 version 2. If there are ID3 version 1
and version 2 tags, ID3 version 2 tag
information has priority.
Note that this player supports ID3 versions
1.0/1.1 and 2.2/2.3.
* Appears when:
– playing an MP3 audio track on a DATA CD/
DATA DVD.
– playing a DivX video file that contains MP3
audio on a DATA CD/DATA DVD.
Checking the information on the
front panel display
front panel display
You can view the time information and text
displayed on the TV screen also on the front
panel display. The information on the front
panel display changes as follows when you
change the time information on your TV
screen.
displayed on the TV screen also on the front
panel display. The information on the front
panel display changes as follows when you
change the time information on your TV
screen.
T
17:30
128k
JAZZ
RIVER SIDE
RIVER SIDE
Bit rate
*
Album name
Track/file name
T
17:30
128k
JAZZ CONCERT 2008
RIVER SIDE SPOT OF THE WORLD
RIVER SIDE SPOT OF THE WORLD
Bit rate
*
ID3 album name
ID3 track title
25
Playback
When playing a DVD
When playing a DATA CD (MP3 audio) or
DATA DVD (MP3 audio)
DATA DVD (MP3 audio)
When playing a DATA CD (DivX video) or
DATA DVD (DivX video)
DATA DVD (DivX video)
When playing a VIDEO CD (without PBC
functions) or CD
functions) or CD
z Hints
• When playing VIDEO CDs without PBC
• When playing VIDEO CDs without PBC
functions, the track number, and the index number
are displayed after the text.
are displayed after the text.
• When playing VIDEO CDs with PBC functions,
the scene number, or the playing time are
displayed.
displayed.
• Long text that does not fit in a single line will
scroll across the front panel display.
• You can also check the time information and text
using the Control Menu (page 11).
Notes
• Depending on the type of disc being played, the
DVD/CD text or track name may not be
displayed.
displayed.
• The player can only display the first level of the
DVD/CD text, such as the disc name or title.
• Playing time of MP3 audio tracks and DivX video
files may not be displayed correctly.
• If you play a disc containing JPEG image files
only, “NO AUDIO DATA” appears when
“MODE (MP3, JPEG)” is set to “AUTO,”
“JPEG” appears when “MODE (MP3, JPEG)” is
set to “IMAGE (JPEG)” in the front panel display.
“MODE (MP3, JPEG)” is set to “AUTO,”
“JPEG” appears when “MODE (MP3, JPEG)” is
set to “IMAGE (JPEG)” in the front panel display.
Playing time of the current
title
title
Remaining time of the
current title
current title
Playing time of the current
chapter
chapter
Remaining time of the
current chapter
current chapter
Text
Current title and chapter
number
number
(returns to top automatically)
Playing time and number of the
current track
current track
Track name or ID3 track title
Current album and track number
(returns to top automatically)
(returns to top automatically)
,
,
Playing time of the current file
The current file name
The current album and file number
(returns to top automatically)
(returns to top automatically)
,,
Playing time and number of the
current track
current track
Remaining time of the current track
Remaining time of the disc
Text
Playing time of the disc
,
,,,
26
Various Play Mode
Functions
Functions
(Programme Play,
Shuffle Play, Repeat Play, A-B Repeat
Play)
You can set the following play modes:
• Programme Play (page 26)
• Shuffle Play (page 27)
• Repeat Play (page 28)
• A-B Repeat Play (page 28)
• Programme Play (page 26)
• Shuffle Play (page 27)
• Repeat Play (page 28)
• A-B Repeat Play (page 28)
Note
The play mode is cancelled when:
– you eject the disc.
– the player enters standby mode by pressing
– you eject the disc.
– the player enters standby mode by pressing
[/1.
Creating your own programme
(Programme Play)
(Programme Play)
You can play the contents of a disc in the
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own programme. You can programme
up to 99 titles, chapters, and tracks.
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own programme. You can programme
up to 99 titles, chapters, and tracks.
1
Press DISPLAY.
The Control Menu appears.
The Control Menu appears.
2
Press
X/x to select
(PROGRAM), then press ENTER.
The options for “PROGRAM” appear.
The options for “PROGRAM” appear.
3
Press
X/x to select “SET
t
,” then
press ENTER.
4
Press
c.
The cursor moves to the title or track row
“T” (in this case, “01”).
“T” (in this case, “01”).
5
Select the title, chapter, or track you
want to programme.
◆ When playing a DVD VIDEO
For example, select chapter “03” of title
“02.”
Press
want to programme.
◆ When playing a DVD VIDEO
For example, select chapter “03” of title
“02.”
Press
X/x to select “02” under “T,” then
press ENTER.
Next, press
X/x to select “03” under “C,”
then press ENTER.
OFF
OFF
SET
ON
OFF
SET
ON
PLAY
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
DVD VIDEO
PROGRAM
1. TITLE
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
– –
01
02
03
04
05
02
03
04
05
“TRACK” is displayed when you play
a VIDEO CD or CD.
a VIDEO CD or CD.
Titles or tracks
recorded on a disc
recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
C
ALL
01
02
03
04
05
06
02
03
04
05
06
– –
02
03
04
05
03
04
05
01
Chapters recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
C
ALL
03
04
05
06
04
05
06
T
– –
01
02
03
04
05
02
03
04
05
02
01
1-7
DVP-NS38/NS39/NS308
27
Playback
◆ When playing a VIDEO CD or CD
For example, select track “02.”
Press
For example, select track “02.”
Press
X/x to select “02” under “T,” then
press ENTER.
6
To programme other titles, chapters,
or tracks, repeat steps 4 to 5.
The programmed titles, chapters, and
tracks are displayed in the selected order.
or tracks, repeat steps 4 to 5.
The programmed titles, chapters, and
tracks are displayed in the selected order.
7
Press
H to start Programme Play.
Programme Play begins.
When the programme ends, you can
restart the same programme again by
pressing
When the programme ends, you can
restart the same programme again by
pressing
H.
To return to normal play
Press CLEAR, or select “OFF” in step 3. To
play the same programme again, select “ON”
in step 3 and press ENTER.
Press CLEAR, or select “OFF” in step 3. To
play the same programme again, select “ON”
in step 3 and press ENTER.
To change or cancel a programme
1
Follow steps 1 to 3 of “Creating your
own programme (Programme Play).”
own programme (Programme Play).”
2
Select the programme number of the title,
chapter, or track you want to change or
cancel using
chapter, or track you want to change or
cancel using
X/x and press c. If you
want to delete the title, chapter, or track
from the programme, press CLEAR.
from the programme, press CLEAR.
3
Follow step 5 for new programming. To
cancel a programme, select “--” under
“T,” then press ENTER.
cancel a programme, select “--” under
“T,” then press ENTER.
To cancel all of the titles, chapters, or
tracks in the programmed order
tracks in the programmed order
1
Follow steps 1 to 3 of “Creating your own
programme (Programme Play).”
programme (Programme Play).”
2
Press
X and select “ALL CLEAR.”
3
Press ENTER.
z Hint
You can perform Repeat Play or Shuffle Play of
programmed titles, chapters, or tracks. During
Programme Play, follow the steps of Repeat Play
(page 28) or Shuffle Play (page 27).
You can perform Repeat Play or Shuffle Play of
programmed titles, chapters, or tracks. During
Programme Play, follow the steps of Repeat Play
(page 28) or Shuffle Play (page 27).
Notes
• When you programme tracks on a Super VCD, the
total playing time is not displayed.
• You cannot use this function with VIDEO CDs or
Super VCDs with PBC playback.
Playing in random order (Shuffle
Play)
Play)
You can have the player “shuffle” titles,
chapters, or tracks. Subsequent “shuffling”
may produce a different playing order.
chapters, or tracks. Subsequent “shuffling”
may produce a different playing order.
1
Press DISPLAY during playback.
The Control Menu appears.
The Control Menu appears.
2
Press
X/x to select
(SHUFFLE), then press ENTER.
The options for “SHUFFLE” appear.
The options for “SHUFFLE” appear.
3
Press
X/x to select the item to be
shuffled.
◆ When playing a DVD VIDEO
• TITLE
• CHAPTER
◆ When playing a VIDEO CD or CD
• TRACK
◆ When playing a DVD VIDEO
• TITLE
• CHAPTER
◆ When playing a VIDEO CD or CD
• TRACK
T
– –
01
02
03
04
05
02
03
04
05
PROGRAM
1. TITLE 0 2 – 0 3
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
Selected title and chapter
PROGRAM
1. TRACK 0 2
ALL CLEAR
2. TRACK
– –
3. TRACK
– –
4. TRACK
– –
5. TRACK
– –
6. TRACK
– –
7. TRACK
– –
0:15:30
– –
01
02
03
04
05
02
03
04
05
T
Selected track
Total time of the programmed tracks
PLAY
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
OFF
CHAPTER
TITLE
OFF
DVD VIDEO
,continued
28
◆ When Programme Play is activated
• ON: shuffles titles, chapters, or tracks
• ON: shuffles titles, chapters, or tracks
selected in Programme Play.
4
Press ENTER.
Shuffle Play starts.
Shuffle Play starts.
To return to normal play
Press CLEAR, or select “OFF” in step 3.
Press CLEAR, or select “OFF” in step 3.
z Hints
• You can set Shuffle Play while the player is
• You can set Shuffle Play while the player is
stopped. After selecting the “SHUFFLE” option,
press
press
H. Shuffle Play starts.
• Up to 200 chapters in a disc can be played in
random order when “CHAPTER” is selected.
Note
You cannot use this function with VIDEO CDs or
Super VCDs with PBC playback.
Super VCDs with PBC playback.
Playing repeatedly (Repeat Play)
You can play all of the titles or tracks on a
disc, or a single title, chapter, or track
repeatedly.
You can use a combination of Shuffle or
Programme Play modes.
disc, or a single title, chapter, or track
repeatedly.
You can use a combination of Shuffle or
Programme Play modes.
1
Press DISPLAY during playback.
The Control Menu appears.
The Control Menu appears.
2
Press
X/x to select
(REPEAT), then press ENTER.
The options for “REPEAT” appear.
The options for “REPEAT” appear.
3
Press
X/x to select the item to be
repeated.
◆ When playing a DVD VIDEO
• DISC: repeats all of the titles.
• TITLE: repeats the current title on a
◆ When playing a DVD VIDEO
• DISC: repeats all of the titles.
• TITLE: repeats the current title on a
disc.
• CHAPTER: repeats the current chapter.
◆ When playing in DVD-VR mode
• DISC: repeats all the titles of the
• DISC: repeats all the titles of the
selected type.
• TITLE: repeats the current title on a
disc.
• CHAPTER: repeats the current chapter.
◆ When playing a VIDEO CD or CD
• DISC: repeats all of the tracks.
• TRACK: repeats the current track.
◆ When playing a DATA CD/DATA DVD
• DISC: repeats all of the albums.
• ALBUM: repeats the current album.
• TRACK (MP3 audio tracks only):
◆ When playing a VIDEO CD or CD
• DISC: repeats all of the tracks.
• TRACK: repeats the current track.
◆ When playing a DATA CD/DATA DVD
• DISC: repeats all of the albums.
• ALBUM: repeats the current album.
• TRACK (MP3 audio tracks only):
repeats the current track.
• FILE (DivX video files only): repeats
the current file.
◆ When Programme Play or Shuffle Play
is activated
• ON: repeats Programme Play or Shuffle
is activated
• ON: repeats Programme Play or Shuffle
Play.
4
Press ENTER.
Repeat Play starts.
Repeat Play starts.
To return to normal play
Press CLEAR, or select “OFF” in step 3.
Press CLEAR, or select “OFF” in step 3.
z Hint
You can set Repeat Play while the player is stopped.
After selecting the “REPEAT” option, press
You can set Repeat Play while the player is stopped.
After selecting the “REPEAT” option, press
H.
Repeat Play starts.
Notes
• You cannot use this function with VIDEO CDs or
Super VCDs with PBC playback.
• When repeating a DATA CD/DATA DVD which
contains MP3 audio tracks and JPEG image files,
and their playing times are not the same, the sound
will not match the image.
and their playing times are not the same, the sound
will not match the image.
• When “MODE (MP3, JPEG)” is set to “IMAGE
(JPEG)” (page 45), you cannot select “TRACK.”
Repeating a specific portion
(A-B Repeat Play)
(A-B Repeat Play)
You can play a specific portion of a title,
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics,
etc.)
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics,
etc.)
1
Press DISPLAY during playback.
The Control Menu appears.
The Control Menu appears.
PLAY
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
OFF
OFF
DISC
TITLE
CHAPTER
OFF
DISC
TITLE
CHAPTER
DVD VIDEO
29
Playback
2
Press
X/x to select
(A-B
REPEAT), then press ENTER.
The options for “A-B REPEAT” appear.
The options for “A-B REPEAT” appear.
3
Press
X/x to select “SET t,” then
press ENTER.
The “A-B REPEAT” setting bar appears.
The “A-B REPEAT” setting bar appears.
4
During playback, when you find the
starting point (point A) of the portion to
be played repeatedly, press ENTER.
The starting point (point A) is set.
starting point (point A) of the portion to
be played repeatedly, press ENTER.
The starting point (point A) is set.
5
When you reach the ending point
(point B), press ENTER again.
The set points are displayed and the
player starts repeating this specific
portion.
(point B), press ENTER again.
The set points are displayed and the
player starts repeating this specific
portion.
To return to normal play
Press CLEAR, or select “OFF” in step 3.
Press CLEAR, or select “OFF” in step 3.
Notes
• When you set A-B Repeat Play, the settings for
Shuffle Play, Repeat Play, and Programme Play
are cancelled.
are cancelled.
• A-B Repeat Play does not work across multiple
titles.
• You may not set A-B Repeat Play for contents in
DVD-VR mode that contains still pictures.
Adjusting the Playback
Picture
Picture
(CUSTOM PICTURE MODE)
You can adjust the video signal of the DVD,
VIDEO CD, DATA CD/DATA DVD in
JPEG format, or DATA CD/DATA DVD
containing DivX video files from the player
to obtain the picture quality you want. Choose
the setting that best suits the programme you
are watching. When you select “MEMORY,”
you can make further adjustments to each
element of the picture (colour, brightness,
etc.).
VIDEO CD, DATA CD/DATA DVD in
JPEG format, or DATA CD/DATA DVD
containing DivX video files from the player
to obtain the picture quality you want. Choose
the setting that best suits the programme you
are watching. When you select “MEMORY,”
you can make further adjustments to each
element of the picture (colour, brightness,
etc.).
1
Press DISPLAY during playback
(When playing a DATA CD or DATA
DVD with JPEG image files, press
twice).
DVD with JPEG image files, press
twice).
The Control Menu appears.
2
Press
X/x to select
(CUSTOM PICTURE MODE), then
press ENTER.
press ENTER.
The options for “CUSTOM PICTURE
MODE” appear.
MODE” appear.
3
Press
X/x to select the setting you
want.
The default setting is underlined.
• STANDARD: displays a standard
• STANDARD: displays a standard
picture.
• DYNAMIC 1: produces a bold
dynamic picture by increasing the
picture contrast and the colour
intensity.
picture contrast and the colour
intensity.
PLAY
SET
OFF
OFF
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
DVD VIDEO
A 18 - 1:32:30
B
A 18 - 1:32:30
B 18 - 1:33:05
DVD VIDEO
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
DYNAMIC 1
STANDARD
STANDARD
,continued
30
• DYNAMIC 2: produces a more
dynamic picture than DYNAMIC 1 by
further increasing the picture contrast
and colour intensity.
further increasing the picture contrast
and colour intensity.
• CINEMA 1: enhances details in dark
areas by increasing the black level.
• CINEMA 2: white colours become
brighter and black colours become
richer, and the colour contrast is
increased.
richer, and the colour contrast is
increased.
• MEMORY: adjusts the picture in
greater detail.
4
Press ENTER.
The selected setting takes effect.
z Hint
When you watch a movie, “CINEMA 1” or
“CINEMA 2” is recommended.
When you watch a movie, “CINEMA 1” or
“CINEMA 2” is recommended.
Adjusting the picture items in
“MEMORY”
“MEMORY”
You can adjust each element of the picture
individually.
• PICTURE: changes the contrast
• BRIGHTNESS: changes the overall
individually.
• PICTURE: changes the contrast
• BRIGHTNESS: changes the overall
brightness
• COLOR: makes the colours deeper or
lighter
• HUE: changes the colour balance
1
In step 3 of “Adjusting the Playback
Picture,” select “MEMORY” and press
ENTER.
The “PICTURE” adjustment bar appears.
Picture,” select “MEMORY” and press
ENTER.
The “PICTURE” adjustment bar appears.
2
Press
C/c to adjust the picture
contrast.
To go to the next or previous picture item
without saving the current setting, press
X/x.
To go to the next or previous picture item
without saving the current setting, press
X/x.
3
Press ENTER.
The adjustment is saved, and
“BRIGHTNESS” adjustment bar
appears.
The adjustment is saved, and
“BRIGHTNESS” adjustment bar
appears.
4
Repeat step 2 and 3 to adjust
“BRIGHTNESS,” “COLOR,” and
“HUE.”
“BRIGHTNESS,” “COLOR,” and
“HUE.”
To turn off the display
Press
Press
O RETURN or DISPLAY.
(
)
C
0 1 : 3 2 : 5 5
PICTURE
0
ENTER
RETURN
1-8
DVP-NS38/NS39/NS308
31
Playback
Sharpening the Picture
(SHARPNESS)
You can enhance the outlines of images to
produce a sharper picture.
produce a sharper picture.
1
Press DISPLAY during playback
(When playing a DATA CD or DATA
DVD with JPEG image files, press
(When playing a DATA CD or DATA
DVD with JPEG image files, press
twice).
The Control Menu appears.
2
Press
X/x to select
(SHARPNESS), then press ENTER.
The options for “SHARPNESS” appear.
3
Press
X/x to select a level.
• 1: enhances the outline.
• 2: enhances the outline more than 1.
• 2: enhances the outline more than 1.
4
Press ENTER.
The selected setting takes effect.
To cancel the “SHARPNESS” setting
Select “OFF” in step 3.
Select “OFF” in step 3.
Locking Discs
(CUSTOM
PARENTAL CONTROL, PARENTAL
CONTROL)
You can set two kinds of playback restrictions
for a disc.
• Custom Parental Control
for a disc.
• Custom Parental Control
You can set playback restrictions so that the
player will not play inappropriate discs.
player will not play inappropriate discs.
• Parental Control
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
The same password is used for both Parental
Control and Custom Parental Control.
Control and Custom Parental Control.
Custom Parental Control
You can set the same Custom Parental
Control password for up to 40 discs. When
you set the 41st-disc, the first disc is
cancelled.
Control password for up to 40 discs. When
you set the 41st-disc, the first disc is
cancelled.
1
Insert the disc you want to lock.
If the disc is playing, press
If the disc is playing, press
x to stop
playback.
2
Press DISPLAY while the player is in
stop mode.
The Control Menu appears.
stop mode.
The Control Menu appears.
3
Press
X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for “PARENTAL
CONTROL” appear.
ENTER.
The options for “PARENTAL
CONTROL” appear.
4
Press
X/x to select “ON t,” then
press ENTER.
◆ If you have not entered a password
◆ If you have not entered a password
DVD VIDEO
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
2
1
OFF
OFF
STOP
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
DVD VIDEO
PASSWORD
ON
PLAYER
PLAYER
OFF
,continued
32
The display for registering a new
password appears.
password appears.
Enter a 4-digit password using the
number buttons, then press ENTER.
The display for confirming the password
appears.
◆ When you have already registered a
password
The display for entering the password
appears.
number buttons, then press ENTER.
The display for confirming the password
appears.
◆ When you have already registered a
password
The display for entering the password
appears.
5
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
“Custom parental control is set.” appears
and then the screen returns to the Control
Menu.
using the number buttons, then press
ENTER.
“Custom parental control is set.” appears
and then the screen returns to the Control
Menu.
To turn off the Custom Parental Control
function
function
1
Follow steps 1 to 3 of “Custom Parental
Control.”
Control.”
2
Press
X/x to select “OFF t,” then press
ENTER.
3
Enter your 4-digit password using the
number buttons, then press ENTER.
number buttons, then press ENTER.
To play a disc for which Custom Parental
Control is set
Control is set
1
Insert the disc for which Custom Parental
Control is set.
The “CUSTOM PARENTAL
CONTROL” display appears.
Control is set.
The “CUSTOM PARENTAL
CONTROL” display appears.
2
Enter your 4-digit password using the
number buttons, then press ENTER.
The player is ready for playback.
number buttons, then press ENTER.
The player is ready for playback.
z Hint
If you forget your password, enter the 6-digit
number “199703” using the number buttons when
the “CUSTOM PARENTAL CONTROL” display
asks you for your password, then press ENTER.
The display will ask you to enter a new 4-digit
password.
If you forget your password, enter the 6-digit
number “199703” using the number buttons when
the “CUSTOM PARENTAL CONTROL” display
asks you for your password, then press ENTER.
The display will ask you to enter a new 4-digit
password.
Parental Control (limited
playback)
playback)
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. The
“PARENTAL CONTROL” function allows
you to set a playback limitation level.
limited according to a predetermined level
such as the age of the users. The
“PARENTAL CONTROL” function allows
you to set a playback limitation level.
1
Press DISPLAY while the player is in
stop mode.
The Control Menu appears.
stop mode.
The Control Menu appears.
2
Press
X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for “PARENTAL
CONTROL” appear.
ENTER.
The options for “PARENTAL
CONTROL” appear.
3
Press
X/x to select “PLAYER t,”
then press ENTER.
◆ If you have not entered a password
The display for registering a new
password appears.
Enter a 4-digit password using the
number buttons, then press ENTER.
The display for confirming the password
appears.
◆ When you have already registered a
password
The display for entering the password
appears.
◆ If you have not entered a password
The display for registering a new
password appears.
Enter a 4-digit password using the
number buttons, then press ENTER.
The display for confirming the password
appears.
◆ When you have already registered a
password
The display for entering the password
appears.
PARENTAL CONTROL
Enter a new 4-digit password,
then press
.
ENTER
CUSTOM PARENTAL CONTROL
Custom parental control is already
set. To play, enter your password
set. To play, enter your password
and press
.
ENTER
STOP
1 8 ( 3 4 )
1 2 ( 2 7 )
T
1 : 3 2 : 5 5
DVD VIDEO
PASSWORD
ON
PLAYER
PLAYER
OFF
33
Playback
4
Enter or re-enter your 4-digit password
using the number buttons, then press
ENTER.
The display for setting the playback
limitation level appears.
using the number buttons, then press
ENTER.
The display for setting the playback
limitation level appears.
5
Press
X/x to select “STANDARD,”
then press ENTER.
The selection items for “STANDARD”
are displayed.
The selection items for “STANDARD”
are displayed.
6
Press
X/x to select a geographic area
as the playback limitation level, then
press ENTER.
The area is selected.
When you select “OTHERS
press ENTER.
The area is selected.
When you select “OTHERS
t,” select
and enter a standard code in the table on
page 60 using the number buttons.
page 60 using the number buttons.
7
Press
X/x to select “LEVEL,” then
press ENTER.
The selection items for “LEVEL” are
displayed.
The selection items for “LEVEL” are
displayed.
8
Select the level you want using
X/x,
then press ENTER.
Parental Control setting is complete.
The lower the value, the stricter the
limitation.
Parental Control setting is complete.
The lower the value, the stricter the
limitation.
To turn off the Parental Control function
Set “LEVEL” to “OFF” in step 8.
Set “LEVEL” to “OFF” in step 8.
To play a disc for which Parental Control is
set
set
1
Insert the disc and press
H.
The display for entering your password
appears.
appears.
2
Enter your 4-digit password using the
number buttons, then press ENTER.
The player starts playback.
number buttons, then press ENTER.
The player starts playback.
z Hint
If you forget your password, remove the disc and
repeat steps 1 to 3 of “Parental Control (limited
playback).” When you are asked to enter your
password, enter “199703” using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press
If you forget your password, remove the disc and
repeat steps 1 to 3 of “Parental Control (limited
playback).” When you are asked to enter your
password, enter “199703” using the number
buttons, then press ENTER. The display will ask
you to enter a new 4-digit password. After you enter
a new 4-digit password, replace the disc in the
player and press
H. When the display for entering
your password appears, enter your new password.
Notes
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this player.
limited on this player.
• Depending on the disc, you may be asked to
change the parental control level while playing
the disc. In this case, enter your password, then
change the level. If the Resume Play mode is
cancelled, the level returns to the previous level.
the disc. In this case, enter your password, then
change the level. If the Resume Play mode is
cancelled, the level returns to the previous level.
Changing the password
1
Press DISPLAY while the player is in
stop mode.
The Control Menu appears.
stop mode.
The Control Menu appears.
2
Press
X/x to select
(PARENTAL CONTROL), then press
ENTER.
The options for “PARENTAL
CONTROL” appear.
ENTER.
The options for “PARENTAL
CONTROL” appear.
3
Press
X/x to select “PASSWORD
t,” then press ENTER.
The display for entering the password
appears.
The display for entering the password
appears.
4
Enter your 4-digit password using the
number buttons, then press ENTER.
number buttons, then press ENTER.
5
Enter a new 4-digit password using the
number buttons, then press ENTER.
number buttons, then press ENTER.
6
To confirm your password, re-enter it
using the number buttons, then press
ENTER.
using the number buttons, then press
ENTER.
If you make a mistake entering your
password
Press
password
Press
C before you press ENTER and input
the correct number.
34
Searching for a Scene
Searching for a
Particular Point on a
Disc
Particular Point on a
Disc
(Scan, Slow-motion Play,
Freeze Frame)
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
disc by monitoring the picture or playing back
slowly.
Notes
• Depending on the disc, you may not be able to do
some of the operations described.
• For DATA CDs/DATA DVDs, you can search for
a particular point only on an MP3 audio track or
DivX video file.
DivX video file.
Locating a point quickly by
playing a disc in fast forward or
fast reverse (Scan)
playing a disc in fast forward or
fast reverse (Scan)
Press
m or M
while playing a
disc. When you find the point you want, press
H to return to normal speed. Each time you
press
H to return to normal speed. Each time you
press
m or M
during scan, the
scan speed changes. With each press the
indication changes as shown below. Actual
speeds may differ between discs.
indication changes as shown below. Actual
speeds may differ between discs.
Playback direction
Opposite direction
* DivX video only
The “
×2B”/ “×2b” playback speed is about
twice the normal speed.
The “3
The “3
M”/“3m” playback speed is faster
than “2
M”/“2m” and the “2M”/“2m”
playback speed is faster than “1
M”/
“1
m.”
Watching frame by frame
(Slow-motion Play)
(Slow-motion Play)
Press
m or M
when the player is
in pause mode. To return to normal speed,
press
press
H.
Each time you press
m or M
during Slow-motion Play, the playback speed
changes. Two speeds are available. With each
press the indication changes as follows:
changes. Two speeds are available. With each
press the indication changes as follows:
Playback direction
2
y 1
Opposite direction (DVD only)
2
y 1
The “2
y”/“2
” playback speed is slower
than “1
y”/“1 .”
Note
For DATA CDs/DATA DVDs, this function works
only for DivX video files.
only for DivX video files.
Playing one frame at a time
(Freeze Frame)
(Freeze Frame)
When the player is in the pause mode, press
(step) to go to the next frame. Press
(step) to go to the preceding frame
(DVD only). To return to normal playback,
press
press
H.
(step)
(step)
×
2
B t
1
M t
2
M t
3
M
3
M
(DVD/VIDEO CD/DATA CD
*
/DATA DVD
*
only)
×
2
B
(DVD VIDEO/CD only)
×
2
b t
1
m t
2
m t
3
m
3
m
(DVD/VIDEO CD/DATA CD
*
/DATA
DVD
*
only)
×
2
b
(DVD VIDEO only)
Click on the first or last page to see other DVP-NS308 / DVP-NS38 / DVP-NS39 service manuals if exist.