Sony DVP-K370 (serv.man2) Service Manual ▷ View online
1-2
8
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front panel
A [/1 (on/standby) button/indicator (28)
Lights up in green when the power is on
and lights up in red when the player is in
standby mode.
and lights up in red when the player is in
standby mode.
B MIC (microphone) connector (43)
C MIC (microphone) LEVEL control
(43)
D ECHO LEVEL control (43)
E Disc tray (28)
F A (open/close) button (28)
G ./> (previous/next) buttons (29)
H C/X/x/c ENTER buttons (32)
I TOP MENU button (32)
J MENU button (32) (33)
K O RETURN button (29)
L DISPLAY button (12)
M x (stop) button (29)
N X (pause) button (29)
O H (play) button (28)
P Front panel display (9)
Q
(remote sensor) (15)
R SURROUND button (51)
S PICTURE MODE button (55)
9
Front panel display
When playing back a DVD
When playing back a VIDEO CD with Playback Control (PBC) (32)
When playing back a CD, DATA CD (MP3 audio), or VIDEO CD (without PBC)
Playing time (47)
Disc type
Current audio
signal (50)
signal (50)
Lights up when you can change the angle (53)
Current play
mode (35)
mode (35)
Current audio
signal (50)
signal (50)
Playing status
Current title and chapter (47)
Lights up when the player outputs
the signal in NTSC format
the signal in NTSC format
Disc type
Playing time (47)
Lights up when the player outputs
the signal in NTSC format
the signal in NTSC format
Current scene (47)
Current play mode (35)
Playing status
Playing time (47)
Disc type
Lights up when
playing MP3
audio tracks (33)
playing MP3
audio tracks (33)
Current play mode (35)
Current track and index (47)
Lights up when the player outputs
the signal in NTSC format
the signal in NTSC format
Playing status
,continued
10
Rear panel
A DIGITAL OUT (COAXIAL) jack (22)
(23) (24)
B DIGITAL OUT (OPTICAL) jack (22)
(23) (24)
C LINE OUT L/R (AUDIO) 1/2 jacks
(21) (22) (23)
D LINE OUT (VIDEO) 1/2 jacks (18)
E S VIDEO OUT jack (18)
F COMPONENT VIDEO OUT jacks
(18)
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
C
B
C
R
11
Remote
A TV [/1 (on/standby) button (62)
B
Z
OPEN/CLOSE button (29)
C Number buttons (32)
The number 5 button has a tactile dot.*
D CLEAR button (35)
E SUBTITLE button (53)
F AUDIO button (50)
G REPEAT button (38)
H VOCAL SELECT button (44)
I ./> PREV (previous)/NEXT
buttons (29)
J c / C SEARCH/STEP buttons
(30)
K X PAUSE button (29)
L H PLAY button (28)
The
H button has a tactile dot.*
M C/X/x/c buttons (32)
N DISPLAY button (12)
O TOP MENU button (32)
P [/1 (on/standby) button (28)
Q VOL (volume) +/– buttons (62)
The + button has a tactile dot.*
R TV/VIDEO button (62)
S ENTER button (performs the same
function as
wl)
T TIME/TEXT button (46)
U ANGLE button (53)
V PICTURE NAVI (navigation) button
(41)
W SUR (surround) button (51)
X PICTURE MODE button (55)
Y REPLAY button (29)
Z SEARCH MODE button (40)
wj
m/M
SCAN/SLOW
buttons (30)
wk x STOP button (29)
wl ENTER button (25)
e; O RETURN button (29)
ea MENU button (32) (33)
* Use the tactile dot as a reference when operating
the player.
1-3
12
Guide to the Control Menu Display
Use the Control Menu to select a function and to view related information. Press DISPLAY
repeatedly to turn on or change the Control Menu display as follows:
repeatedly to turn on or change the Control Menu display as follows:
z Hint
You can skip the ADVANCED display by setting
“ OFF” under “ ADVANCED” in the Control Menu
(page 48).
You can skip the ADVANCED display by setting
“ OFF” under “ ADVANCED” in the Control Menu
(page 48).
Control Menu Display
The Control Menu display 1 and 2 will show different items depending on the disc type. For
details about each item, please refer to the pages in the parentheses.
details about each item, please refer to the pages in the parentheses.
Example: Control Menu display 1 when playing a DVD
* Displays the scene number for VIDEO CDs
(PBC is on), track number for VIDEO CDs/
CDs, album number for DATA CDs.
CDs, album number for DATA CDs.
** Displays the index number for VIDEO CDs/
CDs, MP3 audio track number for DATA CDs.
Control Menu display 1
m
Control Menu display 2 (DVD/VIDEO CD only)
m
ADVANCED display (DVD only, See page 48.)
m
Control Menu display off
,
OFF
1: ENGLISH
2: FRENCH
3: SPANISH
1: ENGLISH
2: FRENCH
3: SPANISH
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
DVD VIDEO
PLAY
Select: Cancel:
SUBTITLE
ENTER
RETURN
Currently playing chapter number**
Playing time
Total number of chapters**
Currently playing title number*
Options
Current setting
Total number of titles*
Playback status
(
(
N Playback,
X Pause,
x Stop, etc.)
Function name of
selected Control
Menu item
selected Control
Menu item
Operation message
Selected item
Control
Menu items
Menu items
Type of disc
being played
being played
13
List of Control Menu Items
Item
Item Name, Function, Relevant Disc Type
TITLE (page 40)/SCENE (page 40)/TRACK (page 40)
Selects the title, scene, or track to be played.
Selects the title, scene, or track to be played.
CHAPTER (page 40)/INDEX (page 40)
Selects the chapter or index to be played.
Selects the chapter or index to be played.
ALBUM (page 33)
Selects the album to be played.
Selects the album to be played.
TRACK (page 40)
Selects the track to be played.
Selects the track to be played.
INDEX (page 40)
Selects the index to be played.
Selects the index to be played.
TIME/TEXT (page 40)
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/CD text or the DATA CD’s track name.
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/CD text or the DATA CD’s track name.
AUDIO (page 50)
Changes the audio setting.
Changes the audio setting.
SUBTITLE (page 53)
Displays the subtitles.
Changes the subtitle language.
Displays the subtitles.
Changes the subtitle language.
ANGLE (page 53)
Changes the angle.
Changes the angle.
TVS (TV Virtual Surround) (page 51)
Selects the surround functions.
Selects the surround functions.
ADVANCED (page 48)
Displays the information (bit rate or layer) of the disc currently playing.
Displays the information (bit rate or layer) of the disc currently playing.
PARENTAL CONTROL (page 58)
Set to prohibit playback on this player.
Set to prohibit playback on this player.
SETUP (page 64)
QUICK Setup (page 25)
Use Quick Setup to choose the desired language of the on-screen display, the aspect
ratio of the TV and the audio output.
CUSTOM Setup
In addition to the Quick Setup setting, you can adjust other various settings.
RESET
Returns the settings in “ SETUP” to the default setting.
QUICK Setup (page 25)
Use Quick Setup to choose the desired language of the on-screen display, the aspect
ratio of the TV and the audio output.
CUSTOM Setup
In addition to the Quick Setup setting, you can adjust other various settings.
RESET
Returns the settings in “ SETUP” to the default setting.
PROGRAM (page 35)
Selects the title, chapter, or track to play in the order you want.
Selects the title, chapter, or track to play in the order you want.
SHUFFLE (page 37)
Plays the title, chapter, or track in random order.
Plays the title, chapter, or track in random order.
REPEAT (page 38)
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/
track/album repeatedly.
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/
track/album repeatedly.
A-B REPEAT (page 39)
Specifies the parts you want to play repeatedly.
Specifies the parts you want to play repeatedly.
,continued
14
z Hint
The Control Menu icon indicator lights up in green
The Control Menu icon indicator lights up in green
when you select any item
except “ OFF.” (“ TVS,” “ PROGRAM,”
“ SHUFFLE,” “ REPEAT,” “ A-B REPEAT,”
“ BNR,” “ DIGITAL VIDEO ENHANCER” only).
The “ ANGLE” indicator lights up in green only
when the angles can be changed. The “ CUSTOM
PICTURE MODE” indicator lights up in green
when any setting other than “ STANDARD” is
selected.
“ SHUFFLE,” “ REPEAT,” “ A-B REPEAT,”
“ BNR,” “ DIGITAL VIDEO ENHANCER” only).
The “ ANGLE” indicator lights up in green only
when the angles can be changed. The “ CUSTOM
PICTURE MODE” indicator lights up in green
when any setting other than “ STANDARD” is
selected.
BNR (page 54)
Adjusts the picture quality by reducing the “ block noise” or mosaic like patterns that
appear on your TV screen.
Adjusts the picture quality by reducing the “ block noise” or mosaic like patterns that
appear on your TV screen.
CUSTOM PICTURE MODE (page 55)
Adjusts the video signal from the player. You can select the picture quality that best
suits the programme you are watching.
Adjusts the video signal from the player. You can select the picture quality that best
suits the programme you are watching.
DIGITAL VIDEO ENHANCER (page 56)
Exaggerates the outline of the image to produce a sharper picture.
Exaggerates the outline of the image to produce a sharper picture.
PICTURE NAVIGATION (page 41)
Divides the screen into 9 subscreens to help you find the scene you want quickly.
Divides the screen into 9 subscreens to help you find the scene you want quickly.
t
15
S
imp
le
le
S
ta
rt
Gu
id
id
e
Simple Start Guide
Quick Overview
A quick overview presented in this guide will
give you enough information to start using the
player for your enjoyment. To use the
surround sound features of this player, refer
to “ Hookups” on page 18.
give you enough information to start using the
player for your enjoyment. To use the
surround sound features of this player, refer
to “ Hookups” on page 18.
Notes
• You cannot connect this player to a TV that does
not have a video input jack.
• Be sure to disconnect the power cord (mains lead)
of each component before connecting.
Step 1: Unpacking
Check that you have the following items:
• Audio/video cord (pinplug
• Audio/video cord (pinplug
× 3 y pinplug
× 3) (1)
• Remote commander (remote) (1)
• Size R6 (AA) batteries (2)
• Size R6 (AA) batteries (2)
Step 2: Inserting
Batteries into the
Remote
Batteries into the
Remote
You can control the player using the supplied
remote. Insert two size R6 (AA) batteries by
matching the
remote. Insert two size R6 (AA) batteries by
matching the
3 and # ends on the batteries
to the markings inside the compartment.
When using the remote, point it at the remote
sensor
When using the remote, point it at the remote
sensor
on the player.
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not drop any foreign object into the remote
casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light
from the sun or a lighting apparatus. Doing so
may cause a malfunction.
may cause a malfunction.
• If you do not use the remote for an extended
period of time, remove the batteries to avoid
possible damage from battery leakage and
corrosion.
possible damage from battery leakage and
corrosion.
1-4
16
Step 3: TV Hookups
Connect the supplied audio/video cord and the power cord (mains lead) in the order (
1~3)
shown below. Be sure to connect the power cord (mains lead) last.
When connecting to a standard 4:3 screen
TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 66.
TV
Depending on the disc, the image may not fit
your TV screen.
If you want to change the aspect ratio, please
refer to page 66.
To change the colour system
The colour system of the player is set to
NTSC or PAL. If the on-screen display of the
player does not appear on the TV, change the
colour system of the player (PAL or NTSC)
so that a picture appears on your TV. To
change the colour system, hold
The colour system of the player is set to
NTSC or PAL. If the on-screen display of the
player does not appear on the TV, change the
colour system of the player (PAL or NTSC)
so that a picture appears on your TV. To
change the colour system, hold
[/1 down for
a few seconds while pressing
X on the player.
z Hints
• To check the current setting of the player’s colour
• To check the current setting of the player’s colour
system, press
[/1 on the player or remote. The
power indicator lights up in green. When “ NTSC”
appears on the front panel display, the colour
system of the player is set to NTSC. When
“ NTSC” does not appear, the colour system is set
to PAL.
appears on the front panel display, the colour
system of the player is set to NTSC. When
“ NTSC” does not appear, the colour system is set
to PAL.
• When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT (VIDEO) 1/2 jacks on the player to
the TV’s video input jack, and connect the LINE
OUT L/R (AUDIO) 1/2 jacks to the TV’s audio
input jack.
LINE OUT (VIDEO) 1/2 jacks on the player to
the TV’s video input jack, and connect the LINE
OUT L/R (AUDIO) 1/2 jacks to the TV’s audio
input jack.
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
VIDEO
AUDIO
INPUT
L
R
(yellow)
(white)
(red)
R
1
2
L
AUDIO
VIDEO
LINE OUT
to LINE OUT
(VIDEO)1 or 2
(VIDEO)1 or 2
to audio input
1
Audio/video
cord (supplied)
2
Power source
to video input
to LINE OUT
L/R (AUDIO)1
or 2
L/R (AUDIO)1
or 2
CD/DVD Player
TV
3
Power source
l : Signal flow
17
Si
m
p
le
St
art
G
art
G
u
id
e
Step 4: Playing a Disc
A Turn on the TV.
B Press [/1 on the player.
C Switch the input selector on your
B Press [/1 on the player.
C Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
player appears on the TV screen.
D Press A on the player to open the
disc tray.
E Place the disc on the tray with the
playback side facing down.
F Press H.
The disc tray closes and the player begins
playing the disc.
playing the disc.
After Step 6
Depending on the disc, a menu may be
displayed on the TV screen. If so, select the
item you want from the menu and play the
DVD (page 32) or VIDEO CD disc (page 32).
Depending on the disc, a menu may be
displayed on the TV screen. If so, select the
item you want from the menu and play the
DVD (page 32) or VIDEO CD disc (page 32).
To stop playing
Press
Press
x.
To remove the disc
Press
Press
A.
To turn off the player
Press
Press
[/1. The player enters standby mode
and the power indicator lights up in red.
With the playback side facing down
18
Hookups
Hooking Up the Player
Follow Steps 1 to 4 to hook up and adjust the settings of the player.
Before you start, disconnect the power cords (mains leads), check that you have all of the
supplied accessories, and insert the batteries into the remote (page 15).
Before you start, disconnect the power cords (mains leads), check that you have all of the
supplied accessories, and insert the batteries into the remote (page 15).
Notes
• Plug cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• Refer to the instructions supplied with the components to be connected.
Step 1: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns
Select one of the patterns
A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
B
A
C
INPUT
S VIDEO
C
R
C
B
Y
COMPONENT
VIDEO IN
VIDEO
AUDIO
INPUT
L
R
l : Signal flow
Component
video cord
(not supplied)
video cord
(not supplied)
(yellow)
Audio/video
cord (supplied)
cord (supplied)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
CD/DVD player
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
(green)
S VIDEO cord
(not supplied)
(not supplied)
TV, projector or AV
amplifier (receiver)
amplifier (receiver)
(red)
(blue)
(yellow)
(green)
(blue)
(red)
to LINE OUT (VIDEO)1 or 2
to COMPONENT
VIDEO OUT
VIDEO OUT
to S VIDEO OUT
19
H
ook
up
s
s
A If you are connecting to a video input jack
Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will
enjoy standard quality images.
enjoy standard quality images.
Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are
connecting to a TV only.)
connecting to a TV only.)
B If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
C If you are connecting to a monitor, projector, or AV amplifier (receiver)
having component video input jacks (Y, C
having component video input jacks (Y, C
B
, C
R
)
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
Notes
• You can switch the player’s colour system to match the colour system of the connected TV (page 16).
• Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear
• Do not connect the player to a VCR. If you pass the player signals via the VCR, you may not receive a clear
image on the TV screen. If your TV only has one audio/video input jack, connect the player to this jack.
Yellow (Video)
White (L)
Red (R)
Yellow (Video)
White (L)
Red (R)
Green
Blue
Red
Green
Blue
Red
VCR
CD/DVD player
TV
Connect
directly
directly
1-5
20
Step 2: Connecting the Audio Cords
Refer to the chart below to select the connection that best suits your system. Be sure to also read
the instructions for the components you wish to connect.
the instructions for the components you wish to connect.
Select a connection
Select one of the following connections,
through
.
* Manufactured under license from Dolby
Laboratories. “ Dolby,” “ Pro Logic,” and the
double-D symbol are trademarks of Dolby
Laboratories.
double-D symbol are trademarks of Dolby
Laboratories.
** “ DTS” and “ DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
Components to be connected
Connection
Your setup
TV
• Surround effects: TVS DYNAMIC (page 52),
• Surround effects: TVS DYNAMIC (page 52),
TVS WIDE (page 52)
(page 21)
example
Stereo amplifier (receiver) and two speakers
• Surround effects: TVS STANDARD (page 52)
or
MD deck/DAT deck
• Surround effects: none
• Surround effects: TVS STANDARD (page 52)
or
MD deck/DAT deck
• Surround effects: none
(page 22)
example
AV amplifier (receiver) having a Dolby
*
Surround (Pro Logic) decoder and 3 to 6
speakers
• Surround effects: Dolby Surround (Pro Logic)
speakers
• Surround effects: Dolby Surround (Pro Logic)
(page 74)
(page 23)
example
AV amplifier (receiver) with a digital input jack
having a Dolby Digital, MPEG audio, or DTS
having a Dolby Digital, MPEG audio, or DTS
**
decoder and 6 speakers
• Surround effects: Dolby Digital (5.1ch) (page 74),
• Surround effects: Dolby Digital (5.1ch) (page 74),
DTS (5.1ch) (page 74), MPEG audio (5.1 ch)
(page 74)
(page 74)
(page 24)
example
A
D
A
B
C
D
21
H
ook
up
s
s
Connecting to your TV
This connection will use your TV speakers for sound.
* The yellow plug is used for video signals (page
18).
z Hint
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) 1/2 jacks to the TV’s
audio input jack.
When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the
LINE OUT L/R (AUDIO) 1/2 jacks to the TV’s
audio input jack.
A
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
R
1
2
L
AUDIO
VIDEO
LINE OUT
A
TV
l : Signal flow
CD/DVD player
(white)
(red)
Audio/video
cord (supplied)
cord (supplied)
to audio input
(yellow)
(white)
(red)
(yellow)*
to LINE OUT L/R
(AUDIO) 1 or 2
(AUDIO) 1 or 2
,continued
22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use
. If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use
.
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
your stereo amplifier (receiver).
z Hint
In connection
In connection
, you can use the supplied
audio/video cord instead of using a separate stereo
audio cord.
audio cord.
Note
If you select one of the TVS effects (page 51) while
playing a disc, no sound will come from your
speakers with the
playing a disc, no sound will come from your
speakers with the
connection.
B
B-1
B-2
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
B-2
B-1
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red)
(white)
Coaxial digital
cord (not supplied)
cord (not supplied)
Stereo audio cord
(not supplied)
(not supplied)
to audio input
to coaxial or optical
digital input
digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
or
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
l: Signal flow
B-1
B-2
23
H
ook
up
s
s
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use
.
Note
When connecting 6 speakers, replace the monaural
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
rear speaker with a center speaker, 2 rear speakers
and a subwoofer.
C
C-1
C-2
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
C-2
C-1
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
R
1
2
L
AUDIO
VIDEO
LINE OUT
CD/DVD player
or
Front (R)
Front (L)
Rear (R)
Subwoofer
l: Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Surround decoder
Center
Rear (mono)
Stereo
audio cord (not
supplied)
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(not supplied)
(red)
(white)
to coaxial or optical digital
input
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
(COAXIAL or OPTICAL)
,continued
Click on the first or last page to see other DVP-K370 (serv.man2) service manuals if exist.