Sony DVP-K370 (serv.man2) Service Manual ▷ View online
1-6
24
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver). You are unable to enjoy the surround sound effects of this
player.
of your AV amplifier (receiver). You are unable to enjoy the surround sound effects of this
player.
Note
After you have completed the connection, be sure to
set “ DOLBY DIGITAL” to “ DOLBY DIGITAL”
and “ DTS” to “ ON” in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “ MPEG” to “ MPEG” (page
70).
set “ DOLBY DIGITAL” to “ DOLBY DIGITAL”
and “ DTS” to “ ON” in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set “ MPEG” to “ MPEG” (page
70).
D
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
R
1
2
L
AUDIO
VIDEO
DIGITAL OUT
LINE OUT
S VIDEO
OUT
COMPONENT
VIDEO OUT
Y
CB
CR
D
PCM/DTS/MPEG
DOLBY DIGITAL
DOLBY DIGITAL
COAXIAL
OPTICAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
a decoder
Subwoofer
Center
Coaxial digital cord
(not supplied)
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(not supplied)
Remove jack cap
before connecting
[Speakers]
CD/DVD player
l: Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital
input
input
to DIGITAL OUT
(COAXIAL or
OPTICAL)
(COAXIAL or
OPTICAL)
25
H
ook
up
s
s
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet (mains).
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
To skip an adjustment, press
>. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press
[/1.
3
Switch the input selector on your
TV so that the signal from the
TV so that the signal from the
player appears on the TV screen.
“ Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“ QUICK” under “ SETUP” in the Control
Menu to run Quick Setup (page 65).
appears at the bottom of the screen. If this
message does not appear, select
“ QUICK” under “ SETUP” in the Control
Menu to run Quick Setup (page 65).
4
Press ENTER without inserting a
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press
X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press
X/x to select the setting that
matches your TV type.
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 66)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
standard TV with a wide-screen mode
• 16:9 (page 66)
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 66)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
./>
X/x
ENTER
[/1
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
CHINESE1
ENGLISH
ENGLISH
ENGLISH
CHINESE2
SCREEN SETUP
TV TYPE:
COLOR SYSTEM:
SCREEN SAVER:
COLOR SYSTEM:
SCREEN SAVER:
16:9
4:3 LETTER BOX
BACKGROUND:
4:3 PAN SCAN
16:9
,continued
26
9
Press
X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 (
connection you selected on pages 21 to
24 (
through
).
• If you connect just a TV and nothing
else, select “ NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “ LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “ DIGITAL OUTPUT.” The Setup
Display for “ DOLBY DIGITAL” appears.
10
Press
X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
connection you selected on pages 22 to
24 (
through
).
• D-PCM (page 70)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 70)
decoder) (page 70)
11
Press ENTER.
“ DTS” is selected.
12
Press
X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
connection you selected on pages 22 to
24 (
through
).
• OFF (page 70)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 70)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust the
“ MPEG” setting (page 70).
and setup operations are complete.
If your AV amplifier (receiver) has an
MPEG audio decoder, adjust the
“ MPEG” setting (page 70).
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (
through
). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 64 for using the Setup Display.
when you first connect the player. Refer to
page 64 for using the Setup Display.
Audio Connection (pages 21 to 24)
• No additional settings are needed.
• Set “ DOWNMIX” to “ DOLBY
SURROUND” (page 69)
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DTS:
DOLBY DIGITAL
D-PCM
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
MPEG:
MPEG:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
PCM
DTS:
OFF
OFF
OFF
ON
B
D
B-2
C-2
D
B
D
A
B-1
C-1
27
H
ook
up
s
s
• If the sound distorts even when the volume
is turned down, set “ AUDIO ATT” to “ ON”
(page 69)
(page 69)
• Set “ DOWNMIX” to “ DOLBY
SURROUND” (page 69)
• Set “ DIGITAL OUT” to “ ON” (page 69)
B-2
C-2
D
1-7
28
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Press
[/1.
The player turns on and the power
indicator lights up in green.
indicator lights up in green.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4
Press
A on the player, and place a
disc on the disc tray.
5
Press
H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 32. For VIDEO CDs, see page 32.
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 32. For VIDEO CDs, see page 32.
To turn off the player
Press
Press
[/1. The player enters standby mode.
z Hint
The player will turn off automatically whenever
you leave it in stop mode for more than 30 minutes
(Auto Power off function).
The player will turn off automatically whenever
you leave it in stop mode for more than 30 minutes
(Auto Power off function).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
• Set the sound to “ STEREO” using the
AUDIO button when you play DTS sound
tracks on a CD (page 50).
tracks on a CD (page 50).
• Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if “ DTS” in “ AUDIO SETUP” is
set to “ OFF” in the Setup Display (page 70),
and may affect your ears or cause your
speakers to be damaged.
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if “ DTS” in “ AUDIO SETUP” is
set to “ OFF” in the Setup Display (page 70),
and may affect your ears or cause your
speakers to be damaged.
[/1
H
A
[/1
Z
AUDIO
H
Power
indicator
indicator
With the playback side facing down
29
Pl
ay
in
in
g Di
sc
s
Notes on playing DVDs with a DTS sound
track
• DTS audio signals are output only through
track
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL or
OPTICAL) jack.
OPTICAL) jack.
• When you play a DVD with DTS sound
tracks, set “ DTS” to “ ON” in “ AUDIO
SETUP” (page 70).
SETUP” (page 70).
• If you connect the player to audio
equipment without a DTS decoder, do not
set “ DTS” to “ ON” in “ AUDIO SETUP”
(page 70). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
set “ DTS” to “ ON” in “ AUDIO SETUP”
(page 70). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
Additional operations
z Hint
The Replay function is useful when you want to
review a scene or dialog that you missed.
The Replay function is useful when you want to
review a scene or dialog that you missed.
Note
You may not be able to use the Replay function with
some scenes.
some scenes.
Locking the disc tray (Child
Lock)
Lock)
You can lock the disc tray to prevent children
from opening it.
from opening it.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “ LOCKED” appears
on the front panel display.
The
O RETURN, ENTER, and then [/1 on the
remote.
The player turns on and “ LOCKED” appears
on the front panel display.
The
Z button on the player or the remote does
not work while the Child Lock is set.
To unlock the disc tray
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
When the player is in standby mode, press
O RETURN, ENTER, and then [/1 again.
Note
Even if you select “ RESET” under “ SETUP” in the
Control Menu (page 65), the disc tray remains
locked.
Control Menu (page 65), the disc tray remains
locked.
To
Operation
Stop
Press
x
Pause
Press
X
Resume play after
pause
pause
Press
X or H
Go to the next chapter,
track, or scene in
continuous play mode
track, or scene in
continuous play mode
Press
>
Go back to the
previous chapter,
track, or scene in
continuous play mode
previous chapter,
track, or scene in
continuous play mode
Press
.
Stop play and remove
the disc
the disc
Press
Z
Replay the previous
scene (DVD only)
scene (DVD only)
Press REPLAY
Z
./>
H
REPLAY
X
x
ENTER
O RETURN
[/1
30
Searching for a
Particular Point on a
Disc
Particular Point on a
Disc
(Search, Scan, Slow-motion
Play, Freeze Frame)
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
disc by monitoring the picture or playing back
slowly.
Note
Depending on the DVD/VIDEO CD, you may not
be able to do some of the operations described.
be able to do some of the operations described.
Locating a point quickly (Search)
During playback, keep pressing
C to
locate a point in the playback direction or
keep pressing
keep pressing
c to locate a point in the
opposite direction. When you find the point
you want, release the button to return to
normal playback speed.
you want, release the button to return to
normal playback speed.
Locating a point quickly by
playing a disc in fast forward or
fast reverse (Scan)
playing a disc in fast forward or
fast reverse (Scan)
Press
m or M
while playing a
disc. When you find the point you want, press
H to return to normal speed. Each time you
press
H to return to normal speed. Each time you
press
m or M
during scan, the
playback speed changes. Three speeds are
available. With each press the indication
changes as follows:
changes as follows:
Playback direction
Opposite direction
The “
×
2
B” /“
×
2
b” playback speed is about
twice the normal speed. The “ FF 2
M” /“ FR
2
m” playback speed is faster than “ FF
1
M” /“ FR 1m.”
Watching frame by frame (Slow-
motion play)
motion play)
Press
m or M
when the player is
in pause mode. To return to the normal speed,
press
press
H.
Each time you press
m or M
during Slow-motion play, the playback speed
changes. Two speeds are available. With each
press the indication changes as follows:
changes. Two speeds are available. With each
press the indication changes as follows:
Playback direction
SLOW 2
y SLOW 1
Opposite direction (DVD only)
SLOW 2
y SLOW 1
The “ SLOW 2
y” /“ SLOW 2
” playback
speed is slower than “ SLOW 1
y” /“ SLOW
1 .”
Playing one frame at a time
(Freeze Frame)
(Freeze Frame)
When the player is in the pause mode, press
C to go to the next frame. Press c to
go to the preceding frame (DVD only). If you
hold the button down, you can view the
frames in succession. To return to normal
playback, press
hold the button down, you can view the
frames in succession. To return to normal
playback, press
H.
M
c / C
H
m
× 2B (DVD/CD only) t FF 1M t FF 2M
× 2b (DVD only) t FR 1m t FR 2m
31
Pl
ay
in
in
g Di
sc
s
Resuming Playback from
the Point Where You
Stopped the Disc
the Point Where You
Stopped the Disc
(Multi-disc
Resume)
The player stores the point where you stopped
the disc for up to 40 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the 41st disc, the resume playback point
for the first disc is deleted.
the disc for up to 40 discs and resumes
playback the next time you insert the same
disc. When you store a resume playback point
for the 41st disc, the resume playback point
for the first disc is deleted.
1
While playing a disc, press
x to
stop playback.
“ RESUME” appears on the front panel
display.
display.
2
Press
H.
The player starts playback from the point
where you stopped the disc in Step 1.
where you stopped the disc in Step 1.
z Hints
• To play from the beginning of the disc, press
• To play from the beginning of the disc, press
x
twice, then press
H.
• For CDs and DATA CDs, the player remembers
the resume playback point for the current disc
unless the disc tray is opened, the AC power cord
(mains lead) is disconnected, or only for DATA
CDs, the player enters standby mode.
unless the disc tray is opened, the AC power cord
(mains lead) is disconnected, or only for DATA
CDs, the player enters standby mode.
Notes
• “ MULTI-DISC RESUME” in “ CUSTOM
SETUP” must be set to “ ON” (default) for this
function to work (page 68).
function to work (page 68).
• The resume playback point for the current disc is
cleared when:
– you change the play mode.
– you change the settings on the Setup Display.
• Resume Play does not work during Shuffle Play
– you change the settings on the Setup Display.
• Resume Play does not work during Shuffle Play
and Programme Play.
• This function may not work with some discs.
H
x
1-8
32
Using the DVD’s Menu
A DVD is divided into long sections of a
picture or a music feature called “ titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as the language for the subtitles
and the language for the sound, select these
items using the MENU button.
picture or a music feature called “ titles.”
When you play a DVD which contains
several titles, you can select the title you want
using the TOP MENU button.
When you play DVDs that allow you to select
items such as the language for the subtitles
and the language for the sound, select these
items using the MENU button.
1
Press TOP MENU or MENU.
The disc’ s menu appears on the TV
screen.
The contents of the menu vary from disc
to disc.
screen.
The contents of the menu vary from disc
to disc.
2
Press
C/X/x/c or the number
buttons to select the item you want
to play or change.
3
Press ENTER.
z Hint
The disc’s menu also appears when the TOP MENU
or MENU button on the player is pressed.
The disc’s menu also appears when the TOP MENU
or MENU button on the player is pressed.
Playing VIDEO CDs with
PBC Functions
PBC Functions
(PBC Playback)
PBC (Playback Control) allows you to play
VIDEO CDs interactively by following the
menu on the TV screen.
VIDEO CDs interactively by following the
menu on the TV screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
Select the item number you want
by pressing
X/x or the number
buttons.
3
Press ENTER.
4
Follow the instructions in the
menu for interactive operations.
menu for interactive operations.
Refer to the instructions supplied with the
disc, as the operating procedure may
differ depending on the VIDEO CD.
disc, as the operating procedure may
differ depending on the VIDEO CD.
Number
buttons
buttons
ENTER
MENU
TOP MENU
C/X/x/c
Number
buttons
buttons
H
x
ENTER
O
RETURN
O
RETURN
./>
X/x
33
Pl
ay
in
in
g Di
sc
s
To return to the menu
Press
Press
O RETURN.
z Hint
To play without using PBC, press
To play without using PBC, press
./> or the
number buttons while the player is stopped to select
a track, then press
a track, then press
H or ENTER.
“ Play without PBC” appears on the TV screen and
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press
the player starts continuous play. You cannot play
still pictures such as a menu.
To return to PBC playback, press
x twice then
press
H.
Notes
• Depending on the VIDEO CD, “ Press ENTER” in
Step 3 may appear as “ Press SELECT” in the
instructions supplied with the disc. In this case,
press
instructions supplied with the disc. In this case,
press
H.
• The PBC functions of Super VCDs do not work
with this player. Super VCDs are played in
continuous play mode only.
continuous play mode only.
Playing an MP3 Audio
Track
Track
You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) format.
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) format.
1
Press
Z and place a DATA CD on
the disc tray.
2
Press
H.
The disc tray closes, and the player starts
to play the first MP3 audio track in the
first album on the disc.
to play the first MP3 audio track in the
first album on the disc.
Notes
• The player can play MP3 audio tracks recorded in
the following sampling frequencies: 32kHz,
44.1kHz, 48kHz.
44.1kHz, 48kHz.
• The playback order may be different from the
edited order. See “ The Playback order of MP3
audio tracks” below for details.
audio tracks” below for details.
Selecting an album and track
1
Press MENU.
The list of MP3 albums recorded on the
DATA CD appears.
DATA CD appears.
Z
H
ENTER
O RETURN
MENU
C/X/x/c
,continued
34
2
Select an album using
X/x and
press ENTER.
The list of tracks contained in the album
appears.
appears.
3
Select a track using
X/x and press
ENTER.
The selected track starts playing.
When a track or album is being played, its
title is shaded.
When a track or album is being played, its
title is shaded.
To go to the next or previous page
Press
Press
c or C.
To return to the previous display
Press
Press
O RETURN.
To turn off the display
Press MENU.
Press MENU.
Notes
• Only the letters in the alphabet and numbers can
be used for album or track names. Anything else
is displayed as “ *.”
is displayed as “ *.”
• ID3 tags cannot be displayed.
About MP3 audio tracks
You can play MP3 audio tracks on CD-
ROMs, CD-Rs, or CD-RWs. However, the
discs must be recorded according to ISO9660
level 1, level 2, or Joliet format for the player
to recognize the tracks.
You can also play discs recorded in Multi
Session.
ROMs, CD-Rs, or CD-RWs. However, the
discs must be recorded according to ISO9660
level 1, level 2, or Joliet format for the player
to recognize the tracks.
You can also play discs recorded in Multi
Session.
See the instructions of the CD-R/RW device
or recording software (not supplied) for
details on the recording format.
or recording software (not supplied) for
details on the recording format.
To play a Multi Session CD
This player can play Multi Session CDs when
an MP3 audio track is located in the first
session. Any subsequent MP3 audio tracks,
recorded in the later sessions, can also be
played back.
When audio tracks and images in music CD
format or video CD format are recorded in the
first session, only the first session will be
played back.
This player can play Multi Session CDs when
an MP3 audio track is located in the first
session. Any subsequent MP3 audio tracks,
recorded in the later sessions, can also be
played back.
When audio tracks and images in music CD
format or video CD format are recorded in the
first session, only the first session will be
played back.
Notes
• If you put the extension “ .MP3” to data not in
MP3 format, the player cannot recognize the data
properly and will generate a loud noise which
could damage your speaker system.
properly and will generate a loud noise which
could damage your speaker system.
• The player cannot play audio tracks in MP3PRO
format.
The Playback order of MP3 audio tracks
The playback order of albums and tracks
recorded on a DATA CD is as follows.
◆Structure of disc contents
The playback order of albums and tracks
recorded on a DATA CD is as follows.
◆Structure of disc contents
1 ( 3 0 )
R O C K B E S T H I T
K A R A O K E
J A Z Z
R & B
M Y F A V O R I T E S O N G S
C L A S S I C A L
S A L S A O F C U B A
B O S S A N O V A
K A R A O K E
J A Z Z
R & B
M Y F A V O R I T E S O N G S
C L A S S I C A L
S A L S A O F C U B A
B O S S A N O V A
J A Z Z
1 ( 9 0 )
1 ( 9 0 )
0 1 S H E I S S P E C I A L
0 2 A L L Y O U N E E D I S . . .
0 3 S P I C Y L I F E
0 4 H A P P Y H O U R
0 5 R I V E R S I D E
0 6 5
0 7 T A K E T I M E , T A K E T I M E
0 2 A L L Y O U N E E D I S . . .
0 3 S P I C Y L I F E
0 4 H A P P Y H O U R
0 5 R I V E R S I D E
0 6 5
0 7 T A K E T I M E , T A K E T I M E
ROOT
Tree 1
Tree 2
Tree 3
Tree 4
Tree 5
album
track
35
Pl
ay
in
in
g Di
sc
s
When you insert a DATA CD and press
H,
the numbered tracks are played sequentially,
from
from
1
through
7
. Any sub-albums/tracks
contained within a currently selected album
take priority over the next album in the same
tree. (Example:
take priority over the next album in the same
tree. (Example:
C contains D so
4
is played
before
5
.)
When you press MENU and the list of MP3
albums appears (page 33), the albums are
arranged in the following order:
albums appears (page 33), the albums are
arranged in the following order:
A t B t
C t D t F t G. Albums that do not
contain tracks (such as album
contain tracks (such as album
E) do not
appear in the list.
z Hints
• If you add numbers (01, 02, 03, etc.) to the front
• If you add numbers (01, 02, 03, etc.) to the front
of the track file names, the tracks will be played in
that order.
that order.
• Since a disc with many trees takes longer to start
playback, it is recommended that you create
albums of no more than two trees.
albums of no more than two trees.
Notes
• Depending on the software you use to create the
DATA CD, the playback order may differ from
the illustration above.
the illustration above.
• The playback order above may not be applicable
if there are more than a total of 200 albums and
tracks in the DATA CD.
tracks in the DATA CD.
• The player can recognize up to 100 albums (the
player will count just albums, including albums
that do not contain MP3 audio tracks). The player
will not play any albums beyond the first 100
albums. Of the first 100 albums, the player will
play no more than a combined total of 200 albums
and tracks.
that do not contain MP3 audio tracks). The player
will not play any albums beyond the first 100
albums. Of the first 100 albums, the player will
play no more than a combined total of 200 albums
and tracks.
Various Play Mode
Functions
Functions
(Programme Play,
Shuffle Play, Repeat Play, A-B Repeat
Play)
You can set the following play modes:
• Programme Play (page 35)
• Shuffle Play (page 37)
• Repeat Play (page 38)
• A-B Repeat Play (page 39)
• Programme Play (page 35)
• Shuffle Play (page 37)
• Repeat Play (page 38)
• A-B Repeat Play (page 39)
Note
The play mode is cancelled when:
– you open the disc tray.
– the player enters standby mode by pressing
– you open the disc tray.
– the player enters standby mode by pressing
[/1.
Creating your own programme
(Programme Play)
(Programme Play)
You can play the contents of a disc in the
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own programme. You can programme
up to 99 titles, chapters, and tracks.
order you want by arranging the order of the
titles, chapters, or tracks on the disc to create
your own programme. You can programme
up to 99 titles, chapters, and tracks.
X/x/c
DISPLAY
ENTER
CLEAR
Number
buttons
buttons
H
,continued
1-9
36
1
Press DISPLAY twice (when playing a
CD, press once).
The Control Menu appears.
CD, press once).
The Control Menu appears.
2
Press
X/x to select
(PROGRAM), then press ENTER.
The options for “ PROGRAM” appear.
The options for “ PROGRAM” appear.
3
Press
X/x to select “SET
t
,” then
press ENTER.
4
Press
c.
The cursor moves to the title or track row
“ T” (in this case, “ 01” ).
“ T” (in this case, “ 01” ).
5
Select the title, chapter, or track you
want to programme.
◆ When playing a DVD
For example, select chapter “ 03” of title
“ 02.”
Press
want to programme.
◆ When playing a DVD
For example, select chapter “ 03” of title
“ 02.”
Press
X/x or the number buttons to select
“ 02” under “ T,” then press ENTER.
Next, press
X/x or the number buttons to
select “ 03” under “ C,” then press
ENTER.
ENTER.
◆ When playing a VIDEO CD or CD
For example, select track “ 02.”
Press
For example, select track “ 02.”
Press
X/x or the number buttons to select
“ 02” under “ T,” then press ENTER.
6
To programme other titles, chapters,
or tracks, repeat Steps 4 to 5.
The programmed titles, chapters, and
tracks are displayed in the selected order.
or tracks, repeat Steps 4 to 5.
The programmed titles, chapters, and
tracks are displayed in the selected order.
7
Press
H to start Programme Play.
Programme Play begins.
When the programme ends, you can
restart the same programme again by
pressing
When the programme ends, you can
restart the same programme again by
pressing
H.
To return to normal play
Press CLEAR, or select “ OFF” in Step 3. To
play the same programme again, select “ ON”
in Step 3 and press ENTER.
Press CLEAR, or select “ OFF” in Step 3. To
play the same programme again, select “ ON”
in Step 3 and press ENTER.
OFF
OFF
SET
ON
OFF
SET
ON
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
DVD VIDEO
PLAY
PROGRAM
1. TITLE
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
– –
01
02
03
04
05
02
03
04
05
“TRACK” is displayed when you play
a VIDEO CD or CD.
a VIDEO CD or CD.
Titles or tracks
recorded on a disc
recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
T
C
ALL
01
02
03
04
05
06
02
03
04
05
06
– –
02
03
04
05
03
04
05
01
Chapters recorded on a disc
PROGRAM
1. TITLE – –
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
C
ALL
03
04
05
06
04
05
06
T
– –
01
02
03
04
05
02
03
04
05
02
01
T
– –
01
02
03
04
05
02
03
04
05
PROGRAM
1. TITLE 0 2 – 0 3
ALL CLEAR
2. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
3. TITLE – –
4. TITLE – –
5. TITLE – –
6. TITLE – –
7. TITLE – –
Selected title and chapter
PROGRAM
1. TRACK 0 2
ALL CLEAR
2. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
3. TRACK – –
4. TRACK – –
5. TRACK – –
6. TRACK – –
7. TRACK – –
0:15:30
– –
01
02
03
04
05
02
03
04
05
T
Selected track
Total time of the programmed tracks
37
Pl
ay
in
in
g Di
sc
s
To turn off the display
Press DISPLAY repeatedly until the display
is turned off.
Press DISPLAY repeatedly until the display
is turned off.
To change or cancel a programme
1
Follow Steps 1 and 3 of “ Creating your
own programme (Programme Play).”
own programme (Programme Play).”
2
Select the programme number of the title,
chapter, or track you want to change or
cancel using
chapter, or track you want to change or
cancel using
X/x or the number buttons,
and press
c.
3
Follow Step 5 for new programming. To
cancel a programme, select “ --” under
“ T,” then press ENTER.
cancel a programme, select “ --” under
“ T,” then press ENTER.
To cancel all the titles, chapters, or tracks
in the programmed order
in the programmed order
1
Follow Steps 1 through 3 of “ Creating
your own programme (Programme
Play).”
your own programme (Programme
Play).”
2
Press
X and select “ ALL CLEAR.”
3
Press ENTER.
z Hint
You can do Repeat Play or Shuffle Play of the
programmed titles, chapters, or tracks. During
Programme Play, follow the Steps of “ Repeat Play”
(page 38) or “ Shuffle Play” (page 37).
You can do Repeat Play or Shuffle Play of the
programmed titles, chapters, or tracks. During
Programme Play, follow the Steps of “ Repeat Play”
(page 38) or “ Shuffle Play” (page 37).
Note
When playing Super VCDs, the total time of the
programmed tracks does not appear on the screen.
programmed tracks does not appear on the screen.
Playing in random order (Shuffle
Play)
Play)
You can have the player “ shuffle” titles,
chapters, or tracks. Subsequent “ shuffling”
may produce a different playing order.
chapters, or tracks. Subsequent “ shuffling”
may produce a different playing order.
1
Press DISPLAY twice during playback
(when playing a CD, press once).
The Control Menu appears.
(when playing a CD, press once).
The Control Menu appears.
2
Press
X/x to select
(SHUFFLE), then press ENTER.
The options for “ SHUFFLE” appear.
The options for “ SHUFFLE” appear.
3
Press
X/x to select the item to be
shuffled.
◆ When playing a DVD
• TITLE
• CHAPTER
◆ When playing a VIDEO CD or CD
• TRACK
◆ When Programme Play is activated
• ON: shuffles titles, chapters, or tracks
◆ When playing a DVD
• TITLE
• CHAPTER
◆ When playing a VIDEO CD or CD
• TRACK
◆ When Programme Play is activated
• ON: shuffles titles, chapters, or tracks
selected in Programme Play.
DISPLAY
ENTER
CLEAR
H
X/x
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
OFF
CHAPTER
TITLE
OFF
DVD VIDEO
PLAY
,continued
38
4
Press ENTER.
Shuffle Play starts.
Shuffle Play starts.
To return to normal play
Press CLEAR, or select “ OFF” in Step 3.
Press CLEAR, or select “ OFF” in Step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Press DISPLAY repeatedly until the Control
Menu is turned off.
z Hints
• You can set Shuffle Play while the player is
• You can set Shuffle Play while the player is
stopped. After selecting the “ SHUFFLE” option,
press
press
H. Shuffle Play starts.
• Up to 200 chapters in a disc can be played in
random order when “ CHAPTER” is selected.
Playing repeatedly (Repeat Play)
You can play all of the titles or tracks on a
disc or a single title, chapter, or track
repeatedly.
You can use a combination of Shuffle or
Programme Play modes.
disc or a single title, chapter, or track
repeatedly.
You can use a combination of Shuffle or
Programme Play modes.
1
Press REPEAT during playback.
The following display appears.
The following display appears.
2
Press REPEAT repeatedly to select the
item to be repeated.
◆ When playing a DVD
• DISC: repeats all of the titles.
• TITLE: repeats the current title on a
item to be repeated.
◆ When playing a DVD
• DISC: repeats all of the titles.
• TITLE: repeats the current title on a
disc.
• CHAPTER: repeats the current
chapter.
◆ When playing a VIDEO CD or CD
• DISC: repeats all of the tracks.
• TRACK: repeats the current track.
◆ When playing a DATA CD (MP3 audio)
• DISC: repeats all of the albums.
• ALBUM: repeats the current album.
• TRACK: repeats the current track.
◆ When Programme Play or Shuffle Play
is activated
• ON: repeats Programme Play or
• DISC: repeats all of the tracks.
• TRACK: repeats the current track.
◆ When playing a DATA CD (MP3 audio)
• DISC: repeats all of the albums.
• ALBUM: repeats the current album.
• TRACK: repeats the current track.
◆ When Programme Play or Shuffle Play
is activated
• ON: repeats Programme Play or
Shuffle Play.
To return to normal play
Press CLEAR, or select “ OFF” in Step 2.
Press CLEAR, or select “ OFF” in Step 2.
z Hints
• You can set Repeat Play while the player is
• You can set Repeat Play while the player is
stopped. After selecting the “ REPEAT” option,
press
press
H. Repeat Play starts.
• You can also select “ REPEAT” from the Control
Menu (page 12).
REPEAT
CLEAR
H
DISC
39
Pl
ay
in
in
g Di
sc
s
Repeating a specific portion (A-
B Repeat Play)
B Repeat Play)
You can play a specific portion of a title,
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics, etc.)
chapter or track repeatedly. (This function is
useful when you want to memorize lyrics, etc.)
1
Press DISPLAY twice during playback
(when playing a CD, press once).
The Control Menu appears.
(when playing a CD, press once).
The Control Menu appears.
2
Press
X/x to select
(A-B
REPEAT), then press ENTER.
The options for “ A-B REPEAT”
appear.
The options for “ A-B REPEAT”
appear.
3
Press
X/x to select “SET t,” then
press ENTER.
The “ A-B REPEAT” setting display
appears.
The “ A-B REPEAT” setting display
appears.
4
During playback, when you find the
starting point (point A) of the portion to
be played repeatedly, press ENTER.
The starting point (point A) is set.
starting point (point A) of the portion to
be played repeatedly, press ENTER.
The starting point (point A) is set.
5
When you reach the ending point
(point B), press ENTER again.
The set points are displayed and the
player starts repeating this specific
portion.
“ A-B” appears on the front panel display
during A-B Repeat Play.
(point B), press ENTER again.
The set points are displayed and the
player starts repeating this specific
portion.
“ A-B” appears on the front panel display
during A-B Repeat Play.
To return to normal play
Press CLEAR, or select “ OFF” in Step 3.
Press CLEAR, or select “ OFF” in Step 3.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
Press DISPLAY repeatedly until the Control
Menu is turned off.
Notes
• You can set A-B Repeat Play for only one specific
section.
• When you set A-B Repeat Play, the settings for
Shuffle Play, Repeat Play, and Programme Play
are cancelled.
are cancelled.
DISPLAY
ENTER
X/x
CLEAR
SET
OFF
OFF
OFF
1 8 ( 3 4 )
1 2 ( 2 7 )
T 1 : 3 2 : 5 5
DVD VIDEO
PLAY
Set point A with
.
A-B REPEAT
ENTER
A: 18 – 1 : 32 : 55
CHAPTER TIME
Set point B with .
ENTER
A-B REPEAT
1 8 ( 3 4 )
1 2 ( 2 7 )
DVD VIDEO
PLAY
A: 18 – 1 : 32 : 55
B: 18 – 1 : 34 : 30
B: 18 – 1 : 34 : 30
CHAPTER TIME
ON
T 1 : 3 4 : 3 0
Click on the first or last page to see other DVP-K370 (serv.man2) service manuals if exist.