Sony SLT-A33 / SLT-A33L / SLT-A33Y / SLT-A55 / SLT-A55L / SLT-A55V / SLT-A55VL / SLT-A55VY Service Manual ▷ View online
SLT-A33/A33L/A33Y/A55/A55V/A55L/A55VL/A55VY_L2
2-15E
Checking supplied accessories.
Note: This item is supplied with the unit as an
accessory, but is not prepared as a service part.
Eyecup
4-192-215-01
Battery charger
(BC-VW1)
0
1-487-907-11 (J)
0
1-487-907-21 (CND, US)
0
1-487-907-41 (EXCEPT J, CND, US)
Power cord (mains lead)
0
1-832-121-51 (CH)
0
1-837-421-11 (E (Saudi, Hong Kong), UK)
0
1-837-422-11 (JE)
0
1-837-427-11 (AEP, E (EXCEPT Saudi, Hong Kong))
0
1-837-428-11 (KR)
0
1-837-429-11 (AUS)
Rechargeable Battery Pack
(NP-FW50)
(Note)
USB cable
1-829-868-31
Shoulder strap
4-196-660-01
CD-ROM
-
Application Software for α camera
4-195-615-02
Body cap
2-688-728-12
Body Cap Seal
2-894-387-01
Conversion (2P) Adaptor
0
1-569-008-33
(E (EXCEPT Saudi, Hong Kong))
Instruction Manual
(Only for destination Japanese model)
日本語，英語，韓国語，中国語のみ部品供給可能です。
4-187-045-01 (JAPANESE)
4-187-045-11 (ENGLISH)
∗ 4-187-045-21 (FRENCH, ITALIAN)
∗ 4-187-045-31 (SPANISH, PORTUGUESE)
∗ 4-187-045-41 (GERMAN, DUTCH)
∗ 4-187-045-52 (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, JE)
∗ 4-187-045-62 (RUSSIAN)
∗ 4-187-045-72 (ARABIC, PERSIAN)
4-187-045-82 (KOREAN)
4-187-045-92 (SIMPLIFIED CHINESE) (CH)
∗ 4-187-046-11 (POLISH)
∗ 4-207-057-11 (INDONESIAN)
Conversion (2P) Adaptor
0
1-569-007-12 (JE)
SLT-A33/A33L/A33Y/A55/A55V/A55L/A55VL/A55VY_L2
3-1
3. ASSEMBLY
Valley fold
Adhesive tape
Mountain fold
A
A
A
B
B
B
C
C
C
Assembly-1: Method of attachment of
LCD-021 Flexible Board
1-1. Fold dotted line parts of the LCD-021 Flexible Board as
shown in figure.
1-2. Peel off the released paper of double-coated adhesive tape
on the B side, and then attach it to the A side without covering
the boss hole. (3 places)
Peel off the released paper of double-coated adhesive tape
on the C side, and then attach it to the A side without covering
the boss hole. (3 places)
Adhesive tape
Adhesive tape
Adhesive tape
1-3. Peel off the released paper of double-coated adhesive tape,
and then fold dotted line parts of the LCD-021 Flexible Board
as shown in figure.
1-4. Attach the CV LCD Hinge Cover (C) to the CV LCD Hinge Assy,
and then attach the LCD-021 Flexible Board as shown in figure.
1-5. 1�Attach the CV LCD Hinge Cover (M), and then rotate
the CV LCD Hinge Assy by 90
°
.
2�
Tighten one “#2: M1.7 X 4.0” screw.
3�
Rotate the CV LCD Hinge Assy by 90
°
to return it to
the original position.
1-6. Attach the LCD-021 Flexible Board as shown in figure.
CV LCD Hinge Cover (C)
CV LCD Hinge Assy
CV LCD Hinge Cover (M)
1-7. 1�Connect the LCD-021 Flexible Board to the connector of
the PD-414 Complete Board, and attach it to the boss hole.
2�
Attach the EM PD Ground Plate and tighten one
“#11: M1.7 X 4.0 (Tapping)” screw.
1-8. 1�Attach the CV P Cabinet (C), and then rotate
the CV LCD Hinge Assy by 90
°
as shown in figure.
2�
Tighten the two “#2: M1.7 X 4.0” screws.
1-9. Wrap the LCD-021 Flexible Board around the CV LCD
Hinge Assy by rotating it one circle as shown in figure.
EM PD Ground Plate
PD-414 Complete Board
CV P Cabinet (C)
SLT-A33/A33L/A33Y/A55/A55V/A55L/A55VL/A55VY_L2
3-2
Assembly-2: Routing of Loudspeaker Harness
Loudspeaker (1.0CM)
Loudspeaker Harness
Assembly-4: Assemble Control Switch Block (TK86300)
When assembling the Control Switch Block (TK86300), check if
the power levers of both CV Front Cover Assy and
Control Switch Block (TK86300) are in ON position.
the power levers of both CV Front Cover Assy and
Control Switch Block (TK86300) are in ON position.
CV Front Cover Assy
Control Switch Block (TK86300)
Assembly-3: Routing of Flash Unit Harness
ST-233 Complete Board
Assembly-5: BD Absorber putting position
BD Battery Holder Assy
BD Absorber
1-10. Rotate the CV LCD Hinge Assy by 90
°
in the position shown
with the arrow mark.
Assembly-6: BD Absorber putting position
BD Absorber
BD Bottom Frame Assy
Assembly-7: Assemble ALX-8630 (AF Module)
7-1. Tighten the S Adjustment Screw
s
completely.
7-2. Loosen the S Adjustment
Screws evenly by 1.5 turns.
ALX-8630 (AF Module)
7-3. Perform the adjustment.
The changed portions from
Ver.1.1 are shown in blue.
Ver.1.1 are shown in blue.
Ver.1.2 2012.11
SLT-A33/A33L/A33Y/A55/A55V/A55L/A55VL/A55VY_L2
3-3
1-3. AP Aperture Unit Charge Position Setting
�
1�
Check that the AP Aperture Unit is in a free state.
∗ Refer to “1-5. AP Aperture Unit Free Position Setting” for
the setting and the confirming method at the free position.
�
2�
Set the Iris Joint Gear by aligning the A portion of
AP Aperture Unit with the B portion (U groove) of
Iris Joint Gear.
AP Aperture Unit
Iris Joint Gear
3�
After setting, rotate the Iris Joint Gear by 180
°
to 210
°
in
the position shown with the arrow mark.
A
B
1-4. AP Aperture Unit
∗ Attach the Iris Joint Gear to the AP Aperture Unit, and then attach
them to the MB Front Frame Assy with the AP Aperture Unit being on
charge position.
∗ Refer to “1-3. AP Aperture Unit Charge Position Setting” for
the confirm method at the charge position.
#64: M1.7 X 5.0 (Tapping)
(Silver)
2-666-551-21
5.0
1.7
Screw
AP Aperture Unit
MB Front Frame Assy
Soldering
Boss
1-5. AP Aperture Unit Free Position Setting
The AP Aperture Unit returns to the original potion when the Iris Joint
Gear is removed from it.
1-6. Ring Roller (A) (SV), Iris Ring
�
1�
Attach the Ring Roller (A) (SV) to the MB Front Frame Assy.
∗ When attaching the Ring Roller (A) (SV), be sure to
remove the Iris Ring beforehand.
�
2
Attach the Iris Ring by aligning it with the stop position
(iris-in end) of drawing.
Ring Roller (A) (SV)
Ring Roller (A) (SV)
Iris Ring
Stop Position (iris-in end)
1-7. Ring Roller (B) (SV), AP Ring Roller C, Ring Roller Shaft (C) (SV)
Ring Roller (B) (SV)
AP Ring Roller C
Ring Roller Shaft (C) (SV)
Ring Roller Shaft (C) (SV)
Ring Roller Shaft (C) (SV)
AP Ring Roller C
AP Ring Roller C
Ring Roller (B) (SV)
Iris Ring
Iris Ring
G
G-85
Assembly-8: Mirror Box Sub Unit
1-1. AF Driving Unit
3.9
2.0
#164: M2.0 X 3.9
(Black)
3-268-954-11
Screw
AF Driving Unit
1-2. EM A Mount Lug Plate (Lower)
Claw
Boss
EM A Mount Lug Plate (Lower)
Click on the first or last page to see other SLT-A33 / SLT-A33L / SLT-A33Y / SLT-A55 / SLT-A55L / SLT-A55V / SLT-A55VL / SLT-A55VY service manuals if exist.