Sony SAL70200G Service Manual ▷ View online
5-3
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
5-1-2. Lens Adjustment Program (Actuator Checker)
The lens adjustment program is required for the finished inspection and the half completion inspection.
Prepare/start the lens adjustment program with the following steps.
Equipment used
• Personal Computer
• Lens Adjustment Program (ActuatorChecker.Ver.x.x.x.x.zip)
• PC Card Setup File (InstaCal.zip)
Note 1:
Lap top PC with PC card slot on which Windows XP runs
Note 2:
Obtain the PC card setup file (InstaCal.zip) from the ESI homepage.
Note 3:
Obtain the lens adjustment program (ActuatorChecker Ver. x.x.x.x.zip) from the ESI homepage.
1. Download of PC card setup file (InstaCal.exe)
1)
Create the “MCC”folder in the C drive.
Fig.5-1-3
2)
Download the file from Service Fixture and Software of ESI homepage, and save it in “C:\MCC”.
3)
Double-click the downloaded file “InstaCal.zip”to extract it.
4)
The window to specify the extract destination folder appears. Click
[Browse...]
.
Fig.5-1-4
5-4
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
5)
Specify “C:\MCC” for the extract destination folder.
Fig.5-1-5
6)
The window returns to the menu to specify the extract destination folder. Click
[Unzip]
.
Fig.5-1-6
7)
When the window below appears, click [OK].
Fig.5-1-7
8)
Return to the menu to specify the extract destination folder. Then, click
[Close]
to close the window.
5-5
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
2. Setup of PC Card
1)
Double-click “InstaCal.msi” in “C:\MCC” folder to begin the installation.
Fig.5-1-8
2)
The menu to begin the installation appears. Click
[Next>]
.
Fig.5-1-9
3)
Specify the install destination folder. As the default is used for it, click
[Next>]
.
Fig.5-1-10
5-6
SAL70200G (2.8/70-200 G) (70-200mm F2.8 G)
4)
The menu to tell that the wizard is ready to install appears. Click
[Install]
.
Fig.5-1-11
5)
The installation is completed. Click
[Finish]
.
Note:
To refer to the “readme” file, check the “Show the readme file” and click
[Finish]
.
Fig.5-1-12
6)
To make the configuration installed effective, the window to prompt the restart appears.
Click “Yes” to restart the PC.
Note:
If a device is connected without restarting, the program may not work properly.
Fig.5-1-13
Click on the first or last page to see other SAL70200G service manuals if exist.