Sony NEX-3 / NEX-3A / NEX-3D / NEX-3K / NEX-5 / NEX-5A / NEX-5CK / NEX-5D / NEX-5H / NEX-5K (serv.man2) Service Manual ▷ View online
NEX-3A/3D/3K/5A/5D/5CD/5K/5CK/5H_L2
2-23E
Checking supplied accessories.
Note: This item is supplied with the unit as an
accessory, but is not prepared as a service part.
4-185-999-01 IM WASHER (C), ADJUST (t = 0.05)
4-185-999-11 IM WASHER (C), ADJUST (t = 0.1)
4-185-999-21 IM WASHER (C), ADJUST (t = 0.15)
4-185-999-31 IM WASHER (C), ADJUST (t = 0.2)
4-185-999-41 IM WASHER (C), ADJUST (t = 0.25)
4-185-999-51 IM WASHER (C), ADJUST (t = 0.3)
4-185-999-61 IM WASHER (C), ADJUST (t = 0.35)
4-185-999-71 IM WASHER (C), ADJUST (t = 0.4)
4-185-999-81 IM WASHER (C), ADJUST (t = 0.45)
4-185-999-91 IM WASHER (C), ADJUST (t = 0.495)
Part No.
Description
4-185-998-01 IM WASHER (B), ADJUST (t = 0.05)
4-185-998-11 IM WASHER (B), ADJUST (t = 0.1)
4-185-998-21 IM WASHER (B), ADJUST (t = 0.15)
4-185-998-31 IM WASHER (B), ADJUST (t = 0.2)
4-185-998-41 IM WASHER (B), ADJUST (t = 0.25)
4-185-998-51 IM WASHER (B), ADJUST (t = 0.3)
4-185-998-61 IM WASHER (B), ADJUST (t = 0.35)
4-185-998-71 IM WASHER (B), ADJUST (t = 0.4)
4-185-998-81 IM WASHER (B), ADJUST (t = 0.45)
4-185-998-91 IM WASHER (B), ADJUST (t = 0.495)
4-185-995-01 IM WASHER (A), ADJUST (t = 0.05)
4-185-995-11 IM WASHER (A), ADJUST (t = 0.1)
4-185-995-21 IM WASHER (A), ADJUST (t = 0.15)
4-185-995-31 IM WASHER (A), ADJUST (t = 0.2)
4-185-995-41 IM WASHER (A), ADJUST (t = 0.25)
4-185-995-51 IM WASHER (A), ADJUST (t = 0.3)
4-185-995-61 IM WASHER (A), ADJUST (t = 0.35)
4-185-995-71 IM WASHER (A), ADJUST (t = 0.4)
4-185-995-81 IM WASHER (A), ADJUST (t = 0.45)
4-185-995-91 IM WASHER (A), ADJUST (t = 0.495)
Part No.
Description
Part No.
Description
2-3. SELECTION PARTS
Ref. No.203
Select the optimum thickness of washer.
Ref. No.204
Select the optimum thickness of washer.
Ref. No.205
Select the optimum thickness of washer.
The changed portions from
Ver.1.4 are shown in blue.
Ver.1.5 2011.01
The CD-ROM supplied contains all of language version of
the α Handbook (PDF) for printing.
・The printed matter is not supplied. If required,
please order it with the part number below.
・
(Only for destination Japanese model)
日本国内については日本語のみが印刷での部品供給可能です。
Power cord (mains lead)
0
1-832-121-51 (CH) (NEX-5CK)
0
1-837-421-11 (UK, E (Saudi, Hong Kong))
0
1-837-422-11 (JE)
0
1-837-427-11 (AEP, E (EXCEPT Saudi, Hong Kong))
0
1-837-428-11 (KR)
0
1-837-429-11 (AUS)
Rechargeable battery pack
(NP-FW50)
(Note)
USB cable
1-829-868-31
Shoulder strap
4-188-538-01
Body cap
4-188-536-01
α
Handbook (PDF)
CD-ROM
- Application Software for α camera
- α Handbook
NEX-3A/3D/3K
4-191-926-01
NEX-5A/5D/
5CD
/5K/5CK/
5H
4-191-823-01
Battery charger
(BC-VW1)
0
1-487-907-11 (J)
0
1-487-907-21 (US, CND)
0
1-487-907-41 (EXCEPT US, CND, J)
Conversion (2P) Adaptor
0
1-569-008-33
(E (Southeast Asia, Taiwan & Latin Area))
4-183-855-01 (JAPANESE)
*
4-183-855-11 (ENGLISH)
*
4-183-855-21 (FRENCH)
*
4-183-855-31 (ITALIAN)
*
4-183-855-41 (SPANISH)
*
4-183-855-51 (PORTUGUESE)
*
4-183-855-61 (GERMAN)
*
4-183-855-71 (DUTCH)
*
4-183-855-81 (TRADITIONAL CHINESE)
*
4-183-855-91 (SIMPLIFIED CHINESE)
*
4-189-192-11 (RUSSIAN)
*
4-189-192-21 (ARABIC)
Conversion (2P) Adaptor
0
1-569-007-12 (JE)
Flash
A-1774-691-A
Flash case
4-186-787-01
*
4-189-192-31 (PERSIAN)
*
4-189-192-41 (KOREAN)
*
4-189-192-51 (POLISH)
*
4-189-192-61 (CZECH)
*
4-189-192-71 (HUNGARIAN)
*
4-189-192-81 (SLOVAK)
*
4-189-192-91 (SWEDISH)
*
4-189-193-11 (FINNISH)
*
4-189-193-21 (NORWEGIAN)
*
4-189-193-31 (DANISH)
*
4-189-193-41 (THAI)
*
4-189-193-51 (UKRAINIAN)
Instruction Manual
(Only for destination Japanese model)
日本語，英語，韓国語，中国語のみ部品供給可能です。
4-183-856-01 (JAPANESE)
4-183-856-11 (ENGLISH)
*
4-183-856-22 (FRENCH, ITALIAN)
*
4-183-856-31 (SPANISH, PORTUGUESE)
*
4-183-856-42 (GERMAN, DUTCH)
*
4-183-856-51 (TRADITIONAL CHINESE,
SIMPLIFIED CHINESE) (E)
*
4-183-856-61 (RUSSIAN)
*
4-183-856-71 (ARABIC, PERSIAN)
4-183-856-81 (KOREAN)
4-183-856-91 (SIMPLIFIED CHINESE)
(CH) (NEX-5CK)
*
4-183-857-11 (POLISH)
Extender
A-1787-305-A (NEX-5H)
Case, EX
4-199-652-01 (NEX-5H)
NEX-3A/3D/3K/5A/5D/5CD/5K/5CK/5H_L2
3-1
3. ASSEMBLY
Frame Assy
Before assembling Frame Assy, temporally secure
FP-1237 Flexible Complete Board.
FP-1237 Flexible Complete Board
Edge of
Frame Assy
Assembly-2: Temporally secure
FP-1237 Flexible Complete Board
Assembly-3: Insulating Sheet A (SY) putting position
Insulating Sheet A (SY)
Align with the upper
edge of the connector.
Align with the right edge
of the connector.
Align with the
lower edge
of the ground.
Assembly-4: LC Flexible Insulating Sheet
putting position
Ground
FP-1237 Complete Board
LC Flexible Insulating Sheet
Assembly-5: LC Connector Insulating Sheet,
LC Flexible Insulating Sheet
putting position
LC Connector Insulating Sheet
LC Flexible Insulating Sheet
Without running on the edge.
LC Cabinet (Rear) Assy
BT Lid Assy
Assembly-6: Method of attachment of BT Lid Assy
BT Lid Shaft
Cabinet (Rear) Assy
BT Lid Open
Spring
B
A
A
B
Tighten the four screws in sequence of 1 to 4 as shown below.
Cabinet (Rear) Assy
Cabinet (Front) Assy
Assembly-7: Screw tightening sequence when
assembling the exterior parts
(NEX-3A/3D/3K)
Tighten the two screws in sequence of 1 to 2 as shown below.
Grip (210)
1
2
Tighten the five screws in sequence of 1 to 5 as shown below.
Front Cabinet Assy
Rear Cabinet Assy
1
2
3
4
5
Side Cover (210)
1
2
3
4
Assembly-8: Shaft Cushion (MF) putting position
Frame Assy
Without running
on the mold part.
Shaft Cushion (MF)
Assembly-1: Method of attachment of
Cabinet (Rear) Assy
Open the LCD as shown below.
Fit the Cabinet (Rear) Assy along the angle of LCD.
Incline Cabinet (Rear) Assy while turning it counterclockwise,
then fit it in LCD.
NEX-3A/3D/3K/5A/5D/5CD/5K/5CK/5H_L2
3-2
LC Flexible Insulating Sheet
Without running on the
black printing area on
FP-1237 Flexible Complete
Board
Without running off the
edge of FP-1237 Flexible
Complete Board
FP-1237 Flexible Complete Board
Assembly-9: LC Flexible Insulating Sheet
putting position
Insulating Sheet B (SY)
SY-258 Complete Board
Without running on the chip.
Assembly-10: Insulating Sheet B (SY) putting position
Assembly-11: Routing of Microphone Harness
Insert the surplus part
into the Front Cabinet.
Pass the harnesses through the
corner of SY-258 Complete Board.
SY-258 Complete Board
Microphone
Harness
CN-439
Complete Board
BT Frame Assy
Insert Gasket (MS) between BT Frame Assy and
CN-439 Complete Board without evagination.
Assembly-12: Inserting Gasket (MS)
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
Gasket (MS)
BT Holder Block Assy
Shutter Unit
Assembly-13: Assemble BT Holder Block Assy
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
Shutter Flexible Board
Assembly-14: Routing of Microphone Harness
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
SP Holder
Route the part shown with
broken line inside SP Holder.
RL Block Assy
Microphone Harness
NEX-5A/5D/
5CD
/5K/5CK/
5H
Assembly-15: Lithium Rechargeable Battery
putting position
NEX-3A/3D/3K
Printing shows position of
Lithium Rechargeable Battery
Printing shows position
of Lithium Rechargeable
Battery
Soldering
Soldering
RL-103 Complete Board
Lithium Rechargeable Battery
Lithium Rechargeable Battery RL-101 Complete Broad
Note: Make sure that the PW Knob is
turned to OFF position when
assembling RL Block Assy.
RL Block Assy
PW Knob
Assembly-16: Note when assembling
RL Block Assy
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
Assembly-17: Note on Alignment of the Flexible Board
when assembling SY Holder Block Assy
(NEX-3A/3D/3K)
SY Holder
Block Assy
Outside SY Holder
Block Assy
Under SY Holder
Block Assy
Above SY Holder
Block Assy
Between Shutter Unit
and SY Holder Block Assy
Under SY Holder
Block Assy
Radiation Sheet (SY) (210)
SY-258 Complete Board
Attach Radiation Sheet (SY) (210) on SY-258 Complete
Board without running off more than two corners of the IC.
Assembly-18: Radiation Sheet (SY) (210)
putting position
(NEX-3A/3D/3K)
Jack Cover Base
Under Jack Cover Base
Above Jack Cover Base
Assembly-19: Note on Alignment of the Flexible Board
when assembling
Jack Cover Base
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
The changed portions from
Ver.1.4 are shown in blue.
Ver.1.5 2011.01
NEX-3A/3D/3K/5A/5D/5CD/5K/5CK/5H_L2
3-3
Assembly-20: Routing of Microphone Harness
(NEX-3A/3D/3K)
Microphone
Cabinet (Upper) Assy
Insert the surplus part into
the hole as shown here.
Route the harnesses under the
two ribs of Cabinet (Upper) Assy.
Cabinet (Upper) Assy
RL Block Assy
Note: Make sure that the PW Knob
is turned to OFF position
when assembling Cabinet
(Upper) Assy to RL Block
Assy.
PW Knob
Assembly-21: Assemble Cabinet (Upper) Assy
(NEX-3A/3D/3K)
Assembly-22: Radiation Sheet (CN) (210)
putting position
(NEX-3A/3D/3K)
CN-439 Complete Board
FP-1246
Flexible Board
Radiation Sheet
(CN) (210)
Within 1.0mm
Without running on the
reinforcement board
Within 1.0mm
Cabinet (Front)
IM Adjust Washer B
IM Adjust Washer A
IM Adjust Washer C
Assembly-23: IM Adjust Washer (A, B, C)
putting position
Assembly-25:
BT Slider Sheet (front) putting position
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
BT Slider Sheet (front)
Rib edge (horizontal):
±0.5mm
Rib edge (vertical):
±0.5mm
Lib edge (vertical):
±0.5mm
MB N Plate SP
Assembly-27:
Apply grease on MB N Plate SP
G
G-85
(J-6082-626-A)
BT Slider Sheet
(horizontal)
Cabinet (Front)
Assembly-26:
BT Slider Sheet (horizontal)
putting position
(NEX-5A/5D/
5CD
/5K/5CK/
5H
)
From edge
(vertical):
±1.0mm
From edge
(horizontal):
±1.0mm
J-6082-735-A
MB Mask Sheet
Note: There should not be any misalignment when attaching
MB Mask Sheet.
MB Mask
Sheet Tape
Cabinet (Front)
Assembly-24:
Method of attachment of MB Mask Sheet
The changed portions from
Ver.1.4 are shown in blue.
Ver.1.5 2011.01
Click on the first or last page to see other NEX-3 / NEX-3A / NEX-3D / NEX-3K / NEX-5 / NEX-5A / NEX-5CK / NEX-5D / NEX-5H / NEX-5K (serv.man2) service manuals if exist.