Sony ILCE-6000 / ILCE-6000L / ILCE-6000Y (serv.man2) Service Manual ▷ View online
ILCE-6000/6000L/6000Y_L2
2-11E
ACCESSORIES
901
902
903
904
905
906
907
908
909
910
911
912
913
2-2. SELECTION PARTS
Ref. No. 206
Select the optimum thickness of washer.
Part No.
Description
* 4-185-995-01
IM WASHER (A), ADJUST (t = 0.05)
* 4-185-995-11
IM WASHER (A), ADJUST (t = 0.1)
* 4-185-995-21
IM WASHER (A), ADJUST (t = 0.15)
* 4-185-995-31
IM WASHER (A), ADJUST (t = 0.2)
* 4-185-995-41
IM WASHER (A), ADJUST (t = 0.25)
* 4-185-995-51
IM WASHER (A), ADJUST (t = 0.3)
* 4-185-995-61
IM WASHER (A), ADJUST (t = 0.35)
* 4-185-995-71
IM WASHER (A), ADJUST (t = 0.4)
* 4-185-995-81
IM WASHER (A), ADJUST (t = 0.45)
* 4-185-995-91
IM WASHER (A), ADJUST (t = 0.495)
Ref. No. 207
Select the optimum thickness of washer.
Part No.
Description
* 4-185-998-01
IM WASHER (B), ADJUST (t = 0.05)
* 4-185-998-11
IM WASHER (B), ADJUST (t = 0.1)
* 4-185-998-21
IM WASHER (B), ADJUST (t = 0.15)
* 4-185-998-31
IM WASHER (B), ADJUST (t = 0.2)
* 4-185-998-41
IM WASHER (B), ADJUST (t = 0.25)
* 4-185-998-51
IM WASHER (B), ADJUST (t = 0.3)
* 4-185-998-61
IM WASHER (B), ADJUST (t = 0.35)
* 4-185-998-71
IM WASHER (B), ADJUST (t = 0.4)
* 4-185-998-81
IM WASHER (B), ADJUST (t = 0.45)
* 4-185-998-91
IM WASHER (B), ADJUST (t = 0.495)
Ref. No. 208
Select the optimum thickness of washer.
Part No.
Description
* 4-185-999-01
IM WASHER (C), ADJUST (t = 0.05)
* 4-185-999-11
IM WASHER (C), ADJUST (t = 0.1)
* 4-185-999-21
IM WASHER (C), ADJUST (t = 0.15)
* 4-185-999-31
IM WASHER (C), ADJUST (t = 0.2)
* 4-185-999-41
IM WASHER (C), ADJUST (t = 0.25)
* 4-185-999-51
IM WASHER (C), ADJUST (t = 0.3)
* 4-185-999-61
IM WASHER (C), ADJUST (t = 0.35)
* 4-185-999-71
IM WASHER (C), ADJUST (t = 0.4)
* 4-185-999-81
IM WASHER (C), ADJUST (t = 0.45)
* 4-185-999-91
IM WASHER (C), ADJUST (t = 0.495)
Ref. No. Part No.
Description
8-328-301-00
Rechargeable battery pack NP-FW50/J (J)
8-328-301-31
Rechargeable battery pack NP-FW50/UC (US, CND)
8-328-301-51
Rechargeable battery pack NP-FW50/CE (EXCEPT US,
CND, CH, J)
8-328-301-72
Rechargeable battery pack NP-FW50/CN (CH)
Ref. No. Part No.
Description
901
1-490-429-21
AC adaptor AC-UB10C/UB10D (US, CND)
901
1-490-429-31
AC adaptor AC-UB10C/UB10D (CH)
901
1-490-429-51
AC adaptor AC-UB10C/UB10D (J)
901
1-490-429-61
AC adaptor AC-UB10C/UB10D (EXCEPT US, CND, CH,
J
, IND
)
901
1-490-498-63
AC Adaptor AC-UB10C (IND)
902
1-836-411-21
Power cord (mains lead) (JE)
902
1-837-424-11
Power cord (mains lead) (E: NTSC)
902
1-837-427-11
Power cord (mains lead) (AEP, UK, AUS, E: PAL)
902
1-837-428-12
Power cord (mains lead) (KR)
902
1-848-142-11
Power cord (mains lead) (IND)
903
1-569-007-31
Conversion (2P) Adaptor (E: NTSC, JE)
904
1-569-008-12
Conversion (2P) Adaptor (AUS, E: PAL)
905
1-846-615-12
Micro USB cable
906
4-535-208-01 Shoulder
strap
907
4-295-853-01 Eyepiece
cup
908
4-188-536-01
Body cap (ILCE-6000)
909
X-2546-071-1 Front lens cap (ILCE-6000Y)
910
X-2584-679-1 Front lens cap (ILCE-6000L/6000Y)
911
4-159-701-03
Rear lens cap (ILCE-6000Y)
912
4-273-919-01
Lens hood (ILCE-6000Y)
913
4-532-055-01
Instruction Manual (JAPANESE)
* 913
4-532-055-11
Instruction Manual (ENGLISH)
* 913
4-532-055-21
Instruction Manual (FRENCH)
* 913
4-532-055-31
Instruction Manual (SPANISH, PORTUGUESE)
* 913
4-532-055-41
Instruction Manual (ENGLISH, FRENCH, GERMAN,
SPANISH, ITALIAN, PORTUGUESE, DUTCH, POLISH,
RUSSIAN, UKRAINIAN, SWEDISH, FINNISH,
NORWEGIAN, DANISH)
* 913
4-532-055-51
Instruction Manual (TRADITIONAL CHINESE,
SIMPLIFIED CHINESE)
* 913
4-532-055-61
Instruction Manual (ARABIC, PERSIAN)
* 913
4-532-055-71
Instruction Manual (KOREAN)
* 913
4-532-055-81
Instruction Manual (SIMPLIFIED CHINESE)
Ref. No. Part No.
Description
The changed portions from
Ver. 1.3 are shown in blue.
Ver. 1.3 are shown in blue.
Ver. 1.4 2015.07
ILCE-6000/6000L/6000Y_L2
3-1
3. ASSEMBLY
Assembly-1: Notes on Assembling the Top cabinet section
Set the power switch to OFF.
Set the orientation of D-cut of the switch
as shown in the figure.
Close the strobe.
Set the mode dial to the auto mark.
Set the orientation of D-cut of the switch
as shown in the figure.
Close the strobe.
Set the mode dial to the auto mark.
Top cabinet section
Close the strobe
Auto mark
Mode dial
OFF
Power switch
Switch
D-cut
3-1. ASSEMBLY
Assembly-2: Installing the ST-1018 flexible board
ST-1018 Flexible Board
ST-1018 Flexible Board
Jack Cover Base Assy (775)
Valley fold
Mountain fold
Mountain fold
Mountain fold
Mountain fold
Claws
Claws
Assembly-3: Installing the RL-1024 flexible board
RL-1024 Flexible Board
RL-1024 Flexible Board
RL Base (775)
Boss
Bosses
Bosses
Bosses
Valley fold
Valley fold
Mountain fold
Mountain fold
Mountain fold
Claws
Claws
Claws
Assembly-4: Screw tightening sequence when assembling the
IM Heat Sink (2000)
IM Heat Sink (2000)
Assembly-5: IM Adjust Washer (A, B, C) putting position
MB N Frame (2000)
Ver. 1.1 2014.07
ILCE-6000/6000L/6000Y_L2
3-2
Assembly-6: Screw tightening sequence when assembling the
MB N Plate A (754)
2
3
4
1
MB N Plate A (754)
Assembly-7: Apply grease on the MB N Plate SP
MB N Plate SP
G G-85
(J-6082-626-A)
(J-6082-626-A)
ILCE-6000/6000L/6000Y_L2
3-3E
3-2. CLEANING PROCEDURE OF OLPF
<Preparation for Remedy>
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
If you use the new Jig (J-6082-663-A) below, make sure to clean the CCD Cleaning Jig (Tip) below before using, please.
Note: Protection sheet is for preventing the scratch of a surface on the Jig (Tip).
The protection sheet may be come off the Jig when you take the Jig from a bag, but it is no problem.
CCD Cleaning Jig (New)
(J-6082-663-A)
(J-6082-663-A)
CCD Cleaning Jig
CCD Cleaning Jig (Tip)
Protection Sheet
<Cleaning Procedure for Tip of CCD Cleaning Jig>
1. Put the two cleaning cloths on a tray like below.
1. Put the two cleaning cloths on a tray like below.
1
Souse the one cleaning cloth in ethyl alcohol.
2
Put the other cleaning cloth on a tray as it is dry.
2. Dab the tip of CCD cleaning jig at the cleaning cloth of 1 5 or 6 times.
* Do not slide the tip from right to left or up and down while dabbing.
3. Dab the tip of CCD cleaning jig at the cleaning cloth of 2 5 or 6 times.
* Do not slide from right to left or up and down while dabbing.
4. Wait until the tip will be dried completely.
1
Souse the cleaning
cloth in ethyl alcohol.
cloth in ethyl alcohol.
2
The dry cleaning cloth.
<ATTENTION>
If you cannot remove dirt with remedy above, cleaning by the following jig are used.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).
If you cannot remove dirt with remedy above, cleaning by the following jig are used.
Soak a small amount of EE3310 (Liquid cleaner) after wrapping the cleaning cloth (J-6082-636-A) around the cleaning jig (J-6082-635-A).
<Cleaning Procedure for the OLPF>
1. Clean up the tip of CCD cleaning jig.
2. Dab the tip of CCD cleaning jig at the OLPF, and pull up straight.
1. Clean up the tip of CCD cleaning jig.
2. Dab the tip of CCD cleaning jig at the OLPF, and pull up straight.
* Do not slide from right to left or up and down while dabbing.
3. Repeat “3” several times to clean up.
4. According to the service manual, check if there is dirt on the OLPF.
4. According to the service manual, check if there is dirt on the OLPF.
OLPF
Cleaning Jig
(J-6082-635-A)
(J-6082-635-A)
Cleaning Cloth
(J-6082-636-A)
(J-6082-636-A)
Cut
EE3310
Click on the first or last page to see other ILCE-6000 / ILCE-6000L / ILCE-6000Y (serv.man2) service manuals if exist.